Tech Binding Parts & Accessories

B&D is now making bolt-tension adjustment plates, in addition to their threaded-hole shift plates. This allows you to fine tune your heel pieces for different boot sole lengths. Interestingly, each fore & aft screw pair is connected underneath the plates. This makes it easier to attach a binding since the bolts will always be spaced the proper distance. It also increases th..

Telemark parts by Kreuzspitze, mostly designed for use with the Kreuzspitze tele-tech kit. Enjoy long travel with the innovative cable system that features swappable springs. Tune your stance with risers and spacers. Tele Cable System - Backcountry heel kit with replaceable springs. Cool design that lets you swap springs to control the tension. Comes with "standard" tension spri..

Looking to take your grom out of bounds but not sure if a dedicated touring setup is worth it just yet? Enter the Contour Kids Adapter. They made it easy to convert a kids alpine binding and boot to an uphill skiing machine. Clip the adapter into the binding, clip the boot into the adapter, attach the skins, and away you go! Once you reach the top just remove the adapter and you ar..

The backcountry ski touring leash from B&D is designed to alleviate the need to detach and attach your skis while putting on your climbing skins. The 1980s phone-style elastic cord stretches enough so you can lift your skis to put on your skins. This means you won’t lose your ski during transitions. It also allows for more slack in the line when your bindings release in a fall...

This is our home for Fritschi binding parts. We’re currently stocking the Vipec and Tecton bindings which have a unique lateral-toe release system. Replacement brakes have their own listing. Tecton Brake Plate x 1, pre 2021 - Brake plate for older Tecton with 4.5mm brake arms. Sold individually. Tecton Brake Plate Kit – (And newer Vipec bindings) Plastic bits that hold the br..

Replacement brakes might be necessary if you move your bindings to a ski with a different width. You also might misplace your brakes since they are easily removable, a handy feature. See below for some various brake options. Vipec/Tecton Brakes - Also known as Diamir Tech Brakes, these are replacement brakes for the Fritschi Vipec, Vipec EVO, and Tecton bindings. They are availa..

The Fritschi ski crampons offer quick and easy attachment for added bite on icy, technical skin tracks. The use of a rotating adapter will allow you to adjust how deep the crampon bites from each of the three riser settings. Machined teeth ensure great bite in icy-but-punchy snow, and an aluminum construction keeps things light and fast whether on your skis or in your pack. The Fri..

Lighter and more compact than the standard Dynafit crampon, the Speed is built for just that. The crampons have mean looking teeth and more cutouts to save weight. They are shallower in bite so work best with lower riser settings, like those found on race bindings. The Speed Crampon is 78mm wide and weighs 63 grams. It takes up less space than a standard crampon so is great for rac..

Leave it to B&D to solve all your Dynafit mounting problems. The toe and heel shift plates can handle just about every drill hole and boot sole length configuration imaginable. Mount a plate to your ski and then screw your Dynafit toe or heel onto the plate. See below for some options, all of which come with adjustment bolts (mount toe plates using your binding's screws or get ..

No more sliding! Neither when skinning on icy sidehills nor when inserting crampons. Plum crampons feature a specially designed attachment mechanism that allows you to plop them in place, instead of sliding them on from the side. Hold the crampon vertically to attach/detach it from Plum bindings, and then let it fall into place. The rigid alloy frame with sharp teeth will take over..

These aren’t your mother’s stilettos. Ski Trab now sets the latest fashion trends in Italy, and it’s becoming fashionable to waltz around in Titan high-heels. If you’d like to keep up with the latest trends, or just get back to skiing, check out these binding heel pieces. Gara Titan WC – Trab's lightest race heel. Ships with a titanium U-spring installed and the required mountin..

Italian toes are more likely to be held onto skis using these widgets. If you’ve got toe problems or just want your feet to look more Italian, get some new binding toe pieces here. This is our growing collection of Ski Trab binding toes. Gara Titan – Lightweight toes from Ski Trab. They don't have coiled springs, instead you press down on the lever to open the wings and step in...

If you did in fact have your bindings mounted when you lost your toes, that means you also lost a heel piece. Get a replacement for that here. Binding Weight ZR 39g (1.4oz) Ultra 40g (1.4oz) ..

ATK leashes are made with a Kevlar core to be ultralight yet strong. They extend up to 60cm (two feet) but have a spiral polyurethane sheath that otherwise prevents them from slopping around and getting caught on branches. A simple clipping system lets you hook and unhook your skis at will. The leashes weigh 17 grams (0.6 ounces) each and will break with an elongation force of arou..

These stainless steel inserts may actually expand your ski quiver instead of killing it. Properly installed in a ski, they allow you to mount bindings in a removable fashion. Thus, you can have a huge quiver of skis that all use the same binding. Of course, you could also use several bindings on one ski, which may help kill a ski quiver, but just creates a binding quiver. These sho..

Known as Snow Crabs, the Kreuzspitze binding toe pieces are some well-built pincers. The RS toes have strong steel springs and don't come with crampon receptors. The GT 2.0 toes have similar action but come with the receptor. Both feature a smooth locking mechanism with multiple notches for new versus broken-in tech fittings. The toe pieces seem to work especially well with La Spor..

Maruelli is the Italian version of B&D, making useful aftermarket parts for tech bindings. They use the highest quality materials to ensure modified products are even more robust than they started. Find our growing list of Maruelli binding parts below. Speed Antitwist Base x2 – Machined out of Titanal, this heel baseplate/spindle for the Speed Radical binding has a metal pos..

In addition to being a fantastic accessory to the ZED and ION bindings, the G3 ION ski crampons could be called the universal crampon due to their second, 'direct to ski' mounting option. Of course, if you use it with the ION, it's even easier-- just slide the included receptors under the toe pieces and screw them in. With its unique corded attachment system, the ION ski crampons c..

Leashes can be very valuable if you’re prone to dropping your skis off a mountain. The Plum leashes are a coiled cable and carabiner that can be hitched to your toe pieces and then to your boot. The length is spot on for a perfect amount of versatility without getting in the way while skinning. It’s long enough that you can reach the leash attachment point on your boot and still ha..

Want to use your Plum bindings with a boot quiver? Add some adjustability with these plates from Plum. All plates are sold in PAIRS. 40mm Heel Plates - The rails offer 40 millimeters of fore/aft adjustment for the Plum Race 135/145/150 bindings. The kits use the same Torx T-25 bolts found on the Plum 165/170s. The 6.5mm thick plates weigh 34g (1.2 oz) plus another 10g for the nu..

Lightweight skis may require some unusual mounting tools. For example, some ski specs call for drill bits that are typically used for child skis. Yes, your expensive skinny skis may in fact be designed for children. But hopefully you mount them like an adult by using some of the tools below. 3.5 x 7.5mm Drill Bit - Custom size required for Vapor Svelte and shorter Nano skis (164..

The patented brakes from Kreuzspitze are cool removable devices that slide into your crampon slot. They are secured by a simple locking switch (included) that is mounted with a single screw under your foot. Take them off when skinning uphill, slide them back on before skiing down. The brakes will retract when you lock your heel into ski mode and deploy when you have a yard sale. Gr..

Getting the right ramp angle on your bindings can make the difference between skiing on-point or in the backseat with tired quads. B&D makes shims for almost every occasion. Choose a shim based on your binding and desired pin height delta, which can take some experimentation. Shorter boot sole lengths are more affected by delta because they end up with a higher ramp angle, thus..

PLEASE NOTE: We have moved the shims to a separate listing: B&D Shims The engineering and machining wizards at B&D Precision in Redding, California also happen to be backcountry skiers. It's therefore not surprising that they dabble in making ski gear. Enough years of dabbling have earned them brand recognition for aftermarket solutions to common backcountry problems. We..

Replacement parts and innovative accessories from Kreuzspitze. Find our growing collection of Kreuzspitze binding parts below, typically sold in pairs except for the screws/bolts/nuts. Crampon Attachments, Race - The machined receptors that need to be mounted under the RS, RSA, SCTT, SCTTT toe pieces. Accepts standard tech binding crampons. 8 grams. Crampon Attachments, Steel..

Kreuzspitze has come to the rescue for skiers who find they have too much ramp angle in touring bindings. The 14-millimeter adjustment plates are screw-hole compatible with Dynafit TLT Vertical / Radical / Comfort / Speed heel units. That means you can replace a touring heel with a race heel without redrilling. Also available are 18mm and 40mm heel plates, a fast rental-style 40mm ..

Hardened steel forks? Check. Flat-on-ski mode? Check. Optional risers? Check. Optional adjustment plates? You betcha. The Trofeo heels from Kreuzspitze are long on features and quality. The small Italian manufacturer makes the heels in-house with the rest of their RS bindings and accessories. We think Kreuzspitze won't be a strange name for long. Sold individually, so get 2 for bot..

Wear out a fork? Lose a screw? Decide to add the oddly expensive crampon attachment? Whatever you're into, we will try to help. Find our growing list of parts for Plum bindings below: Crampon Attachments - New (x2) - Machined receptors for Oazo and Race 150/170 toe pieces, including the required screws. This attachment system is only compatible with Plum ski crampons, and will n..

Moving Dynafit bindings from one ski to another often requires a brake change to accommodate the new width. Brakes can also get damaged. Please note ► The Dynafit brakes listed below the line are priced individually so you will need two if switching skis or one if fixing damage. The brakes have a few millimeters of wiggle room, so a 100mm brake will work on a ski slightly over 100m..

Alpine Touring If your stash of heels outweighs your stash of toes, it's time to grow more toes. And if you're going to go through some growing pains, you might as well make it some nice toes. The Plum binding toe pieces are relatively sturdy contraptions that have the same hole pattern as the Dynafit TLT Classic / Vertical / Comfort series (not to mention the Trab, Hagan, Kreuz..

Maybe you need a replacement. Maybe you're building a franken-binding. Maybe you just want to lighten up your heels. We won't ask what you do with them, but we will take your money. These are Plum binding heel pieces, priced & sold INDIVIDUALLY. If you buy two, they come in a boxed set. If you buy one, we'll just put a stamp on the top and hope for the best. We'll even loosely ..

Replacement parts and accessories for Ski Trab TR-Race, Gara Titan, and TR-2 bindings. All are sold in pairs. Also see our listings for complete toes and heels. Crampon Attachments - Slide underneath the toe pieces and accept standard tech binding ski crampons. Heel Forks - Choose from titanium or steel (+9g) replacement heel forks for your Gara Titan, Titan Vario, and TR-Rac..

Made for the Ultra and Ultra WC bindings, these Hagan plates will give you 30mm for fore/aft heel adjustment, or approximately 4 mondo sizes. If you want to use a quiver of boots or increase the resale value of your rig, the adjustment plates are a good investment. They also help cover up mismounted bindings if you didn't hit your mark. All Plates are sold in Pairs with adjustment ..

It's hard to argue with stronger and lighter! ATK placed itself front and center in the eyes of the ski mountaineering crowd with a knockout ski crampon made with a robust, lightweight alloy. Designed by Batman himself, these sinister-looking crampons inspire confidence in steep terrain. Available in several widths, most ATK crampons have a deep bite. The exception is the 70mm race..

Leashing yourself to your skis in the backcountry has benefits and drawbacks. If you are prone to yard sales and subsequent difficulty finding your skis, it can be a good idea to tie yourself in. If you are prone to getting caught in avalanches and swimming for your life, the last thing you need is to be anchored to anything that could pull you down. However if you end up resort sk..

If you already have ten toes, you might consider getting some heels to match. The Dynafit binding heel pieces can be used to replace borked ones, build an unsanctioned super binding, or be stashed in your collection of other unusual parts. It's also not a bad idea to have a backup plan if you're planning an extended stay in a remote place. See the table below for details. ..

Need a replacement tech toe? Want a backup for a critical mission? Just need toes for a splitboard? Have only one leg? Whatever the reason, you can't go wrong with Dynafit binding toe pieces. Select from the optionally-auto-locking Low Tech Race; race weight but non-auto-locking Superlite; or the sturdy Radical toes with Power Towers, amongst others. Here are the details: ..

Mounting these plates between Dynafit race bindings and your skis will give you some fore/aft adjustment. This allows you to use different boots with the same skis, adding to their useful life and increasing the resale value of your rig. The Dynafit adjustment plates are made with 7075 aluminum, meaning they are light and strong. All plates are sold in pairs. DNA / Mezzalama Hee..

If you've ever tried to skin up a steep, blank, icy face without ski crampons, you will immediately appreciate the value of the security they provide. By plunging into hard snow ice, the crampon teeth add grip when skins don't make full contact or you're slipping downhill. Whether you are chasing someone up a greasy skin track in the winter or trying to time the corn cycle in the s..