Welcome to the most complete selection of tech bindings in the world! Modern ski touring bindings are designed to be light and allow a more natural walking stride, saving energy for the down. From maximally efficient race bindings to fully featured resort crossover models and various hybrids between the two, we have you covered.
Check out our backcountry binding finder! In order to maximize your fun and safety, it's critical to match a touring binding to your size, ability, equipment, and goals. We've built a tool to streamline the process.
Leashes can be very valuable if you’re prone to dropping your skis off a mountain. The Plum leashes are a coiled cable and carabiner that can be hitched to your toe pieces and then to your boot. The length is spot on for a perfect amount of versatility without getting in the way while skinning. It’s long enough that you can reach the leash attachment point on your boot and still ha..
Want to use your Plum bindings with a boot quiver? Add some adjustability with these plates from Plum. All plates are sold in PAIRS.
40mm Heel Plates - The rails offer 40 millimeters of fore/aft adjustment for the Plum Race 135/145/150 bindings. The kits use the same Torx T-25 bolts found on the Plum 165/170s. The 6.5mm thick plates weigh 34g (1.2 oz) plus another 10g for the nu..
The Plum 170 binding is the 150 with a built-in 20mm adjustment plate. If you plan on using more than one boot with your setup, this is the version for you. The re-designed toe pieces feature smooth-operating lock levers that have clear stops for skiing and skinning. The heel piece has a simple pin-cover flap for uphill skinning and can be turned sideways for flat-on-ski skating (s..
Lightweight skis may require some unusual mounting tools. For example, some ski specs call for drill bits that are typically used for child skis. Yes, your expensive skinny skis may in fact be designed for children. But hopefully you mount them like an adult by using some of the tools below.
3.5 x 7.5mm Drill Bit - Custom size required for Vapor Svelte and shorter Nano skis (164..
The patented brakes from Kreuzspitze are cool removable devices that slide into your crampon slot. They are secured by a simple locking switch (included) that is mounted with a single screw under your foot. Take them off when skinning uphill, slide them back on before skiing down. The brakes will retract when you lock your heel into ski mode and deploy when you have a yard sale. Gr..
Getting the right ramp angle on your bindings can make the difference between skiing on-point or in the backseat with tired quads. B&D makes shims for almost every occasion. Choose a shim based on your binding and desired pin height delta, which can take some experimentation. Shorter boot sole lengths are more affected by delta because they end up with a higher ramp angle, thus..
PLEASE NOTE: We have moved the shims to a separate listing: B&D Shims
The engineering and machining wizards at B&D Precision in Redding, California also happen to be backcountry skiers. It's therefore not surprising that they dabble in making ski gear. Enough years of dabbling have earned them brand recognition for aftermarket solutions to common backcountry problems. We..
Replacement parts and innovative accessories from Kreuzspitze. Find our growing collection of Kreuzspitze binding parts below, typically sold in pairs except for the screws/bolts/nuts.
Crampon Attachments, Race - The machined receptors that need to be mounted under the RS, RSA, SCTT, SCTTT toe pieces. Accepts standard tech binding crampons. 8 grams.
Crampon Attachments, Steel..
Kreuzspitze has come to the rescue for skiers who find they have too much ramp angle in touring bindings. The 14-millimeter adjustment plates are screw-hole compatible with Dynafit TLT Vertical / Radical / Comfort / Speed heel units. That means you can replace a touring heel with a race heel without redrilling. Also available are 18mm and 40mm heel plates, a fast rental-style 40mm ..
Hardened steel forks? Check. Flat-on-ski mode? Check. Optional risers? Check. Optional adjustment plates? You betcha. The Trofeo heels from Kreuzspitze are long on features and quality. The small Italian manufacturer makes the heels in house with the rest of their SCTT bindings and accessories. We think Kreuzspitze won't be a strange name for long. Sold individually, so get 2 for b..
Wear out a fork? Lose a screw? Decide to add the oddly expensive crampon attachment? Whatever you're into, we will try to help. Find our growing list of parts for Plum bindings below:
Crampon Attachments - New (x2) - Machined receptors for Oazo and Race 150/170 toe pieces, including the required screws. This attachment system is only compatible with Plum ski crampons, and will n..
Moving Dynafit bindings from one ski to another often requires a brake change to accommodate the new width. Brakes can also get damaged. Please note ► The Dynafit brakes listed below the line are priced individually so you will need two if switching skis or one if fixing damage. The brakes have a few millimeters of wiggle room, so a 100mm brake will work on a ski slightly over 100m..
If your stash of heels outweighs your stash of toes, it's time to grow more toes. And if you're going to go through some growing pains, you might as well make it some nice toes. The Plum binding toe pieces are relatively sturdy contraptions that have the same hole pattern as the Dynafit TLT Classic / Vertical / Comfort series (not to mention the Trab, Hagan, Kreuz..
Maybe you need a replacement. Maybe you're building a franken-binding. Maybe you just want to lighten up your heels. We won't ask what you do with them, but we will take your money. These are Plum binding heel pieces, priced & sold INDIVIDUALLY. If you buy two, they come in a boxed set. If you buy one, we'll just put a stamp on the top and hope for the best. We'll even loosely ..
Replacement parts and accessories for Ski Trab TR-Race, Gara Titan, and TR-2 bindings. All are sold in pairs. Also see our listings for complete toes and heels.
Crampon Attachments - Slide underneath the toe pieces and accept standard tech binding ski crampons.
Heel Forks - Choose from titanium or steel (+9g) replacement heel forks for your Gara Titan, Titan Vario, and TR-Rac..
Made for the Ultra and Ultra WC bindings, these Hagan plates will give you 30mm for fore/aft heel adjustment, or approximately 4 mondo sizes. If you want to use a quiver of boots or increase the resale value of your rig, the adjustment plates are a good investment. They also help cover up mismounted bindings if you didn't hit your mark. All Plates are sold in Pairs with adjustment ..
It's hard to argue with stronger and lighter! ATK placed itself front and center in the eyes of the ski mountaineering crowd with a knockout ski crampon made with a robust, lightweight alloy. Designed by Batman himself, these sinister-looking crampons inspire confidence in steep terrain. Available in several widths, most ATK crampons have a deep bite. The exception is the 70mm race..
Leashing yourself to your skis in the backcountry has benefits and drawbacks. If you are prone to yard sales and subsequent difficulty finding your skis, it can be a good idea to tie yourself in. If you are prone to getting caught in avalanches and swimming for your life, the last thing you need is to be anchored to anything that could pull you down. However if you end up resort sk..
If you already have ten toes, you might consider getting some heels to match. The Dynafit binding heel pieces can be used to replace borked ones, build an unsanctioned super binding, or be stashed in your collection of other unusual parts. It's also not a bad idea to have a backup plan if you're planning an extended stay in a remote place. See the table below for details.
Need a replacement tech toe? Want a backup for a critical mission? Just need toes for a splitboard? Have only one leg? Whatever the reason, you can't go wrong with Dynafit binding toe pieces. Select from the optionally-auto-locking Low Tech Race; race weight but non-auto-locking Superlite; or the sturdy Radical toes with Power Towers, amongst others. Here are the details:
Mounting these plates between Dynafit race bindings and your skis will give you some fore/aft adjustment. This allows you to use different boots with the same skis, adding to their useful life and increasing the resale value of your rig. The Dynafit adjustment plates are made with 7075 aluminum, meaning they are light and strong. All plates are sold in pairs.
LTR 2.0 / PDG Heel ..
If you've ever tried to skin up a steep, blank, icy face without ski crampons, you will immediately appreciate the value of the security they provide. By plunging into hard snow ice, the crampon teeth add grip when skins don't make full contact or you're slipping downhill. Whether you are chasing someone up a greasy skin track in the winter or trying to time the corn cycle in the s..
Take a proven design, add higher release values and more adjustability, and you get the Plum Guide binding. Crafted in France with extremely accurate CNC machines, the binding echoes the classic TLT Speed that has proven itself reliable for more than a decade. However by using aerospace grade materials, Plum was able to increase the overall strength and dial up the max release valu..
The Dynafit Speed Radical is the standard by which touring bindings are measured. Evolved from the tried and true TLT Speed, the binding is designed to be safer, easier to use, and support a wider range of boots sizes and release values. The skiability and precision control of the previous incarnation remain intact. If you are looking for a lightweight binding that gives you more a..