Dynafit Binding Parts

Most tech bindings use a heel gap that allows a ski to flex as the heel pins sink deeper into the rear boot fitting. These spacer tools will help you set that gap accurately when you're adjusting your binding for different boots. Made by Dynafit but 4mm is a common gap size for other bindings as well. 4mm Heel Spacer - The yellow plastic stick used to set the gap on the Low Tech..

Here lie various parts you may find on top of your Dynafit binding heels. For older TLT models, see our used parts page Used Dynafit parts. Radical Roof - Complete roof for Speed Radical, and Radical ST/FT 1.0 bindings. Speed Turn Nubbin - The little plastic knob on top of the climbing aid. Associated bolt and nut included. Also works with older TLT Speed bindings. Beast L..

Last spot to find those parts you need to fix or adjust your Dynafit bindings. From Antitwist kits to spring bushings, here lies everything else, aka Miscellaneous parts. Speed Radical Heel Housing - Plastic housing for Speed Radical binding heels. Also works with Radical ST and FT 1.0 bindings. Speed Radical Antitwist Kit - Fix for older heels that rotate while in touring mo..

Here lie Dynafit brake parts such as Anti Friction Devices (AFDs) and if you are lucky, the Rare H clip for your old Vertical brakes. Radical Rotation Locks (pair) - The plastic clips integrated into Radical ST & FT 1.0 brakes that prevent the heel unit from rotating while touring. Includes the impossibly small screws to hold 'em in place. Radical 1.0 AFD Kit - Gliding pa..

Toe plates, heel plates, extension plates, and more. These are all the parts you need to make new those hand me down Radical or Vertical bindings. Please note that heel bases with integrated brakes are listed in our brakes section. Speed Radical Heel Base - Adjustable base with tower that holds Speed Rad heel housings. Radical ST Toe Plate - The plastic riser plate under the ..

Where did that screw go? Lose a screw behind the workbench or on your last run? We have more here. All hardware is sold individually. Titanium Screw - Ultralight and strong screw for mounting Low Tech Race and Speed Superlite bindings. 12.5mm Torx Screw - For mounting Low Tech Race & Speed Superlite bindings, plus Speed Radical & Speed Turn 2.0 toe pieces. 15.5mm T..

Lost or broke your receptors? No problem, we got them. These receptors are sold individually and accept all Dynafit crampons. LTR / Superlite Crampon Clip - The little bit of metal that ski crampons slide into plus the tiny screws to secure it. Works with Low Tech Race 1.0, 2.0, and the original Superlite series (Speed, 2.0, 175). These are NOT compatible with the Low Tech Race ..

Here lie some forks and springs for new and old Dynafit bindings. Speed Radical Vertical Spring Assembly - New springs and parts to replace the forward (vertical) release mechanism on your Speed Radical, Speed Turn, or Radical ST 1.0 bindings. Also works for older bindings like the Vertical ST. Superlight 150 U Springs - Pair of replacement vertical springs for Superlight 150..

Run into an obstacle and snap off your toe lever? This is the place to find various replacement toe levers (a.k.a. Excenters) for Dynafit bindings. Also found here are toe lever locks for the Dynafit Speed and Speedfit bindings. LTR 105 / SL 150 Toe Lever - Plastic toe lever, spring and pin are included. LTR 2.0 / Superlite 2.0 Toe Lever - The black plastic toe lever and asso..

New parts for old bindings can be hard to find. Used parts for old bindings should now become easier. Trade in your used and/or broken Dynafit bindings for store credit, and we will make the working parts available for others. Please note that the photos shown here are often of new products, simply for reference. The item you receive may have visible wear. Used parts can be returne..