12/1/2017
Question from Travis
 
Do you have just the brakes/stoppers for the Plum Guide bindings
12/2/2017
Answer from Rebekah S
 
Hi Travis,

We have Plum brakes listed here, but please note you need the brake-compatible baseplate to use them.
Answer this question:

11/2/2017
Question from Jon B
 
Hello,

I have the older Guides. Currently they are mounted on a pair of BD Justices 185 115mm underfoot. They are great for hiking but, I'm looking at getting new, wider sticks. I see the new Guides have breaks up to 130mm. How wide is too wide for my bindings?

Thanks,

Jon
11/4/2017
Answer from jbo
 
Hi Jon, there are no hard and fast rules, it can depend on your skiing. If you are worried about it, you could check out the yak which is a similar binding built specifically for wider skis.
Answer this question:

4/25/2017
Question from Tony Addino
 
Hope that all is well. Question - Would the Plumb Guide work with Voile V8 186Cm / 115 underfoot ?

Tony
4/25/2017
Answer from jbo
 
Hi Tony, yeah no problem. You could go brakeless or likely fit the 110mm brakes on it.
4/26/2017
Answer from Anthony A
 
Thank you the quick respone. Awesome . The V8 is fairly light for its size, just wanted to make sure that the Guide would be able to drive it . I'm not a "charger" ski style wise. Just lots of touring backcountry and sidecountry stuff. Sounds like the Guide/ V8 would be a great combo.
4/26/2017
Answer from Anthony A
 
One additional ? I have a Jigarex mounting jig. Jigarex offers a couple of mounting plates for 1 or 2 Plum bindings. However , they dont list a hole pattern plate for the Guide specifically. Are Plum hole patterns all the same across their models?
4/26/2017
Answer from jbo
 
Hi Anthony, the hole patterns vary per model. See our list of hole patterns for more info.
Answer this question:

3/27/2017
Question from Greg
 
On the Plum Guides with 90mm brake:

1. OK with 83mm waist skis?
2. I will have to mount myself or local ski shop. What about templates and mounting specs?
3. Will they work with my Dynafit TLT 4 Pro's? Currently using Dynafit Comfort binding.
4. Any issues to consider with a more 'modern' boot like the Arcteryx Procline?

Thanks...GREG
3/28/2017
Answer from jbo
 
Hi Greg,
1. The 90mm brakes will work fine on those skis.
2. We have paper templates available.
3. Yes, these will work with just about any boot with standard tech fittings.
4. No problem there either!
Answer this question:

3/16/2017
Question from Mark Williamson
 
My skis are 87mm underfoot so the 90mm brake would be fine, but if I change my skis in the next few seasons for something wider can I just replace the brake, or do I need to get an entire new heel unit.
3/16/2017
Answer from jbo
 
Hi Mark, the brakes are integrated into the base plate, so you'd need a whole base+brake which cost around half of a heel unit.
Answer this question:

3/15/2017
Question from Mike
 
I have an older pair of Guides (silver toe wings, year?) Do these bindings utilize the same hole pattern?
Thanks
3/15/2017
Answer from jbo
 
Hi Mike, yes the hole pattern hasn't changed since that version.
Answer this question:

12/2/2016
Question from Richard
 
Hi there,
Can you tell me if Plum Guide bindings have the same screw mounting pattern as dynafits? I have Dynafit Stoke skis with preset screw placement - wondering if Plums will match.
Thanks,
Richard
12/2/2016
Answer from Trace Leches
 
Hey Richard, each brand has its own proprietary hole pattern and they generally don't like to share. We have a Hole Pattern Recognition article where you can see the hole pattern compatibility if you have any further questions.
12/2/2016
Answer from jbo
 
Hi Richard, the Plum heels match Dynafits, no problem there. The toe patter uses the old Dynafit Vertical pattern, minus the front-most hole. You're likely in luck with that combo.
Answer this question:

12/1/2016
Question from Skier6
 
Will this plum work OK with the rocker sole of LA Sportive Sceptre v1 ( black ones). Will brakes work with this boot or should I go with brak-less version?
Thanks
12/1/2016
Answer from jbo
 
Hi Skier6, the Spectres work OK. You may need to remove a bit of sole material right near the toe wings to help it lay in flat-on-ski mode, but that is not unusual with various tech bindings and AT boot combos. Brakes work fine but you should still go with the brakeless version :)
Answer this question:

5/25/2016
by thomc (used product a few times)
 
Used on Movement Vertex, got the ones with brakes. I have brakes on none of my other skis, but wanted one pair with them, also because I like the higher heel plug for an all-around ski. Skied for a few days at Snowbird, so have not really worked this in the BC as yet. My first impression is that Plum has a very refined design - the bindings are easier to get into than most dynafit-type ones I've used or own. The brake locks in the up position (so it's out of the way when touring), which is also handy for waxing or other times when you want them out of the way. It does not appear they can easily be removed, so be sure you want brakes if you get them with them. I had no play or pre-releasing, and use a modest DIN setting, but obviously this requires more time to confirm. This is a very carefully and well made item - even the crampon attachment is a step up from the normal dynafit type, dropping in from above as opposed to sliding in from the side. More to come with more use.
5/26/2017
Reply from thomc
 
Updated. I've had plate movement twice, likely due to the 2 screw adjustment plate. Brian at skimolife is a better source of details. https://www.instagram.com/brian.skimolife. Admittedly it slipped after late season skiing on Crouches berard but I didn't do as much stream and turf skiing as the locals who passed me. Even after tightening that morning they slipped in shrubbery terrain. Will likely locktite a bit next year. Also a great reason to bring a posi multi tool and bits along.
Comment on this review:

2/15/2016
Question from joss dobbie
 
Hi JBO,

thank you for your ongoing advice about the right bindings for the Big Fish X. I understand the Plum Guide binding has lateral and vertical release, whereas the Superfit 2.0 only has a lateral release. I am not exactly sure what the difference is and whether there is a safety implication for only having lateral release. What is the additional risk, considering I am only a moderately good skier?

Also I see the Superlight 2.0 only has two riser heights (to 47mm) and no "flat" option. Does it definitely not have a flat option - seems odd? The Plum Guide on the other hand top riser is 87mm, presumably better on steep slopes? As a moderate skier would perhaps the Plum Guide be better for me?

For information, I am looking to buy the Big Fish X skis and bindings to race in the PdG in April (but also use recreationally afterwards). As a moderate skier (from England) I am expecting to complete in a time of 14 hours. I wonder if that has any effect on your recommendation.
2/15/2016
Answer from jbo
 
Hi Joss, the Superlite 2.0 has a forward release, it's just not adjustable, meaning it may or may not be appropriate for your height, weight, age, boot sole length, and skier type. You can turn the heel sideways for a flat more which seems to work reasonably well, but there is no detent so the heel piece may bet accidentally turned into ski mode if it gets hit by your boot.

The highest risers can be a bit more efficient on some slopes, but lighter the better for a 14 hour race!
Answer this question: