6/26/2018
Question from Jim Stone
 
will this binding work with the TLT Radical FT 2.0, and the Black Diamond Boundry 107 ski ? The 110mm ski crampon.
6/27/2018
Answer from Trace Leches
 
Hey Jim! Yup, sure will!
Answer this question:

5/2/2018
Question from Paul Fuller
 
Is the dynafit binding crampon compatable with a G3 Ion binding?

Thank you,
Paul
5/2/2018
Answer from I-M
 
Paul,
Unfortunately the Dynafit crampons are not compatible with the G3 Ion binding. G3 manufactures a specific crampon for the Ion.

Isaac
Answer this question:

4/8/2018
Question from Ellen
 
Do you sell the blocks to add to the dynafit ski crampons? (Like the B and D model....) Do the dynafit ski crampons still work with the old dynafit vertical bindings?
If you do sell the blocks, how much do they weigh? My B and D ski crampons are so heavy and 12mm wider than my new ski, so I am shopping!
Ellen
4/8/2018
Answer from jbo
 
Hi Ellen, there aren't specific risers for the Dynafit crampons, but some folks will use Speed Turn Nubbins.
Answer this question:

3/20/2018
Question from sebastian white
 
Will these dynafit ski crampons work with G3's ION LT 12 bindings?
3/20/2018
Answer from jbo
 
Hi Sebastian, no, you'll need the ION crampons.
Answer this question:

2/12/2018
Question from brent
 
Hey,

Does the Dynafit 110mm ski crampon fit the DPS 112 Wailer? I'm fine if it's tight as I can bend the crampon a bit. Would rather do that then have a sloppy 120mm.
2/12/2018
Answer from Nate
 
Hi Brent, you're going to have to use a 120mm crampon on that ski. The 110 is too tight to even be bent in to place.
Answer this question:

1/27/2018
Question from Jeff
 
Will the 100mm Dynafit crampon fit over a ski that is 98mm under foot, or go with the 110mm?? thanks, Jeff
1/27/2018
Answer from Trace Leches
 
Hey Jeff! Very possibly! I think there's a good chance it'll work just fine but the boot size, sidecut, and sidewall construction will make or break that potentially tight fit. What ski is it? I may be able to measure for you!
Answer this question:

1/17/2018
by T Fink (downright abused product)
 
I have these in the 90mm width and they are a must if you like skiing peaks (early morning starts) or enjoy ski traverses. They can save you so much time if you just need to get through a sketchy section and don't want to carry your skins and put on real chompers. Yes, they slow down your skinning but the feeling of security is worth it. I used these every day when completing the Haute Route and they were 100% worth the weight.
Comment on this review:

1/16/2018
Question from Taylor
 
Hi guys! I have a pair of these in the 90mm width for a pair of Cho's. Would it be dumb to try and use them on a skinnier pair of skis as well (79 waist) or should I get another pair of cramps in the 80mm width?
1/16/2018
Answer from Nate
 
Hi Taylor, I've used 90mm crampons with a 78mm ski a fair amount and it hasn't been a problem. I wouldn't want too much more size difference though or the crampon starts applying too much torque on the receptor that is attached to the binding.
Answer this question:

12/2/2017
Question from Jeff
 
Ski width at the crampon receptor is 103 mm. 100mm crampon too small, 110 just right, correct? Thanks!
12/2/2017
Answer from jbo
 
Hi Jeff, yes I would go with the 110s in that scenario.
Answer this question:

4/21/2017
Question from becky
 
I ski the BD Starlet, 100mm under foot. Will I want the 100mm crampons?
4/21/2017
Answer from jbo
 
Hi Becky, it will be close! Depending on how far your toe pieces is from the center of the sidecut, you may need to go up to 110mm. If you measure the width of your ski right at your receptor it would help: below 102mm and you should be OK.
Answer this question: