4/9/2018
Question from Dan
 
Will these adjustment plates work with the dynafit expedition heel piece?
Thanks
4/9/2018
Answer from jbo
 
Hi Dan, these are not compatible with the Expedition. Good news is the Basic Hagan plates work with that heel.
Answer this question:

2/18/2018
Question from Simon T
 
Do these work with the FISCHER TOUR RACE 3.0 BINDING?
2/18/2018
Answer from jbo
 
Hi Simon, yes the LTR 2.0 version will work.
Answer this question:

1/7/2018
Question from Jessie
 
Hi,
I am curious if these adjustment plates are strictly for use of the superlite bindings?

Cheers
1/7/2018
Answer from jbo
 
Hi Jessie,

The Superlite 2.0 heel plates are exclusively for the Superlite 2.0 binding. The LTR/PDG 2.0 heel plates are exclusively for the LTR and PDG 2.0 bindings.
Answer this question:

12/27/2017
Question from Dan K
 
I av an old pair of dynafit tlt speed bindings that work great. I need a plate or a shim to bring up the height of the binding so I can mount some brakes, sine I do not have enough clearance right now. I need about a ~cm of height. Would these plates do the job?

thanks
12/27/2017
Answer from jbo
 
Hi Dan, these adjustment plates aren't designed for that binding and won't be of much help. The B&D shift plates might help you out.
Answer this question:

10/25/2017
Question from Jesse A. Logan
 
ANy idea when/if the Dynafit Superlight 2 heel plates will be available??
10/25/2017
Answer from jbo
 
Hi Jesse, we're not expecting stock until December. For now I'd look at the B&D version.
Answer this question:

10/8/2017
Question from ml2
 
skimo wizards,
are adjustment plate bolts for the SL 1.0 like the Pyrenean ibex (extinct)?
thx
10/8/2017
Answer from jbo
 
Hi ml2, they are more like regular-sized mini-wheats...they exist in theory but you just can't buy them!
Answer this question:

9/3/2017
Question from Matt
 
Hi Guys,

Will you have any adjustment plates for dynafit superlite 2.0 in stock soon?
9/3/2017
Answer from jbo
 
Hi Matt, it sounds like more won't arrive in these parts until December. Until then, check out the B&D plates.
Answer this question:

1/20/2017
Question from Mark
 
On 1-05-2016 I saw you still had adjustment plates for the superlite 1.0 (red one) in stock but without hardware.

Do you still have some? I actually just need the front but would take complete set if that is all you can do.

Thanks
1/20/2017
Answer from jbo
 
Hi Mark, yes we had some made and have the nuts, just no bolts. Send us an e-mail if you're interested.
Answer this question:

1/20/2017
Question from Tim
 
I have a pair of PDG skis with low low tech race 2.0 bindings already mounted to them. I want to switch boots. Can I take the rear binding piece off and re-drill to place the adjustment plate underneath?
1/20/2017
Answer from jbo
 
Hi Tim, you sure can. Fill and seal the holes and make some new ones.
Answer this question:

1/5/2017
Question from Richard
 
Do you still have the adjustment plates for the superlite 1.0 (red one) in stock?

1/5/2017
Answer from jbo
 
Hi Richard, we have some without hardware. You'd have to grind down some screws to fit.
Answer this question: