12/18/2017
Question from Brendan
 
I'm considering using some radical ST toe plates to shim speed radical toes. Does said part include a crampon receptor?
12/18/2017
Answer from jbo
 
Hi Brendan, it does not. You still need the Radical Crampon Receptors if you don't have them already.
Answer this question:

12/10/2017
Question from Cole
 
Eric, do you sell the spring with the Beast high heel riser?
12/12/2017
Answer from eric
 
Eric- Sorry, we don't have any heel risers at the moment either.
Answer this question:

12/6/2017
Question from Cole
 
I broke the lower heel riser on a Dynafit Beast 16. I bought a replacement but when I went to put it on the spring was to bent to reattached. I tried to bend it back but it broke. Do you sell the spring?
12/7/2017
Answer from eric
 
Cole- Sorry we do not have the spring individually.
Answer this question:

11/23/2017
Question from Tim
 
My heel pins on LTR 2.0 are starting to wear out. Are these ones replaceable, and if so, where do you get them? Can't seem to find them here.
11/24/2017
Answer from jbo
 
Hi Tim, unfortunately these aren't available as a part. You could take some from the RC1 heels.
Answer this question:

11/2/2017
Question from Marc
 
Will the LTR forks work on the SL 2.0? I have the first generation SL 2.0, black and green with DIN 12 and I'd like a lighter spring - DIN 8-10. Any possibility for a swap out?
11/2/2017
Answer from Trace Leches
 
Hey Marc, unfortunately there's no cross-over with the springs and as far as Dynafit is concerned the SL 2.0 springs aren't even removable. We haven't actually tried to get a spring out, as they've specifically warned against doing that, however it doesn't look any more complicated than just hammering out the lateral pin. Best I can do is point you towards some new heel units.
Answer this question:

6/11/2017
Question from Sather Ekblad
 
What is the black part called on the red speed superlites from a couple years ago
6/12/2017
Answer from Trace Leches
 
Hey Sather, thanks for reaching out! There are a few, which black part are you thinking? The heel housing?
Answer this question:

5/30/2017
Question from Champagne
 
I have a 2015 Dynafit Radical Speed binding with the antitwist plate and noticed that one of the plastic heel bases is cracked near a mounting screw. FYI, I swap the bindings regularly between skis and accidentally over torqued one of the screws. Could I replace the cracked heel base with the Speed Radical Heel Base?
5/31/2017
Answer from Trace Leches
 
Hey Champagne. Ouch, that's not fun. Yeah, in theory you could just swap the heel base, but there are a few different versions of it so you'll have to make sure you're getting the one that'll accept the anti-rotation plate. We don't have any in stock at the moment and likely won't be seeing them until the beginning of next season at the very earliest, but I'd be surprised if we see them at all.
Answer this question:

5/2/2017
Question from Andrea
 
Hi, I need the "RV 10 Spring Set - Inner and outer springs for one heel piece with a 10 release value. Speed Turn or Radical series" together with the adjusting screw for my radical ST Dynafit Binding, but it is not in the selection list. Is it available to be ordered?

Thanks

Andrea
5/3/2017
Answer from Trace Leches
 
Hey Andrea, at the moment it's not available to be ordered. I do have a Used Dynafit Parts listing as well which you may want to keep your eye on over time for those parts, though we only have Radical FT spring assemblies at the moment.
Answer this question:

4/23/2017
Question from Costin M
 
Hiya,

I am planning to remount my Radical FTs 1.0 but without the vibration damping system. I have read (on Wildsnow.com) that I can use the toe plate from the Radical ST 1.0. So two questions: have you tried this and if it worked do you have the toe plate in stock (and what price). Thanks!

C.
4/23/2017
Answer from jbo
 
Hi Costin, yes the toe pieces are the same so the baseplates are interchangeable. They are listed as Radical ST Toe Plates in the drop list.
Answer this question:

4/18/2017
Question from Magnus
 
Hi. I cant find the screw to adjust the radical FT boot size? The long steel screw on the rear / bottom.
4/18/2017
Answer from Nate
 
Hi Magnus, the adjustment screw in the Radical FT baseplate is unavailable as a separate part. It is integrated into the brake/baseplate unit. You can purchase those here.
Answer this question: