2/28/2017
Question from Gabriel
 
Hi,

I've recently bought a pair of demo skis equipped with a Dynafit Radical St 2.0 with a rental toe plate adapter. I'm wondering what base plate would I need to buy to make it none demo.

Thanks
Gabriel
3/2/2017
Answer from jbo
 
Hi Gabriel, you need the Radical 2.0 Toe Plate.
Answer this question:

2/27/2017
Question from Jakub
 
Hi there, I would love to ask you.
Is it possible to orded the high heel riser (spare part) for Beast 16?
Mine got broken this weekend and i see you offer only the low.
2/27/2017
Answer from jbo
 
Hi Jakub, unfortunately those are out for the season.
Answer this question:

2/22/2017
Question from Richard S
 
Hi Jason and Crew,
Does or did Dynafit make a metal crampon attachment clip for the Speed Turn 1.0 (5-hole toes)? The plastic ones look so flimsy and I would like to replace it.
2/22/2017
Answer from jbo
 
Hi Richard, unfortunately not. There is only the one option.
Answer this question:

2/17/2017
Question from Lars
 
I need an adjustment screw for my radical st (1st gen) bindings (The ones that makes it possible to adjust binding sizes- located under the heel piece). Which of these parts do i need. Also- is it a hassle to change this? The old one is almost without any patterns.
2/18/2017
Answer from jbo
 
Hi Lars, do you mean adjust for different boot sizes? You'll need a whole new baseplate. We have a couple in a our used section.
Answer this question:

2/13/2017
Question from Kawika
 
Hello,
Do you guys know where I could find tlt st climbing aid?
Thanks,
kawika
2/14/2017
Answer from Trace Leches
 
Hey Kawika! I think you're referring to the Radical ST, correct? If the roof is broken you'll likely need a new heel piece. Send me an email at help@skimo.co with a picture of the part you are referring to and I might be able to get you some more info!
Answer this question:

2/11/2017
Question from Daniel
 
I'm looking for a couple Radical ST Toe Plates to shim a set of Speed Radicals with a factory look. I don't see them listed in the drop down. Do you happen to have any lying around?
2/12/2017
Answer from eric
 
Hey Daniel we dont currently have those shims on stock. You can use a B&D shim or keep checking back, as we might get some later in the season.
Answer this question:

1/26/2017
Question from Dave Combs
 
I need a Dynafit ski brake retaining clip. The following website contains a picture of the part,
https://www.wildsnow.com/10742/dynafit-radical-vertical-comfort-bindings-brake-removal-install/

Thanks

Dave Combs
1/26/2017
Answer from jbo
 
Hi Dave, we have a couple here, listed as Brake Retainer.
Answer this question:

1/26/2017
Question from Jeremy G
 
Hey I'm looking for mounting screws for my speed turns. Which ones should I get? Thanks. And I think it's awesome that you sell individual parts like this.
1/26/2017
Answer from jbo
 
Hi Jeremy, for the Turns you need 8 or 10 12.5mm Torx screws (depending on 1.0 or 2.0 version), and 8 Pan-head Torx screws.
Answer this question:

1/23/2017
Question from Misha
 
I forgot to include the crampon receptors when I mounted a pair of radical ST toes. Is there any reason I shouldnt ski these without the receptors? Thanks!
1/23/2017
Answer from Trace Leches
 
Hey Misha, you should be fine, I wouldn't worry. The crampon receptor only helps the rear (closest to the tail) toe piece screws sit flush with the top sheet, but if you are worried about structural integrity things are A-Ok!
Answer this question:

1/16/2017
Question from eric
 
do the radical st toe plates come with longer screws as well? also do you get a pair or just 1?
1/16/2017
Answer from jbo
 
Hi Eric, the toe plates are sold individually without screws.
Answer this question: