1/26/2017
Question from Jeremy G
 
Hey I'm looking for mounting screws for my speed turns. Which ones should I get? Thanks. And I think it's awesome that you sell individual parts like this.
1/26/2017
Answer from jbo
 
Hi Jeremy, for the Turns you need 8 or 10 12.5mm Torx screws (depending on 1.0 or 2.0 version), and 8 Pan-head Torx screws.
Answer this question:

1/23/2017
Question from Misha
 
I forgot to include the crampon receptors when I mounted a pair of radical ST toes. Is there any reason I shouldnt ski these without the receptors? Thanks!
1/23/2017
Answer from Trace Leches
 
Hey Misha, you should be fine, I wouldn't worry. The crampon receptor only helps the rear (closest to the tail) toe piece screws sit flush with the top sheet, but if you are worried about structural integrity things are A-Ok!
Answer this question:

1/16/2017
Question from eric
 
do the radical st toe plates come with longer screws as well? also do you get a pair or just 1?
1/16/2017
Answer from jbo
 
Hi Eric, the toe plates are sold individually without screws.
Answer this question:

1/8/2017
Question from Mike
 
Hi jbo, so what I'm wondering is if the TLT is the same as the TLT Speed. The ski tech tells me my toe pieces are Dynafit TLTs. I'm wondering if the TLT speed is the same or different.
1/8/2017
Answer from jbo
 
Hi Mike, Dynafit has used the TLT initialism for a number of products. You might want to send us a photo to be sure.
Answer this question:

1/6/2017
Question from Mike
 
I have the Dynafit TLT toe pieces (5 bolt pattern). I'm looking for a shim for the toe. Is this equivalent to the TLT Speed Toe Plates that you have listed?
1/6/2017
Answer from jbo
 
Hi Mike, the Speed Toe plates are the plastic that the metal wings sit on. They don't lift the binding further than stock, they are stock. For shims, check out the B&D ones.
Answer this question:

1/5/2017
Question from Dimitris Pantelias
 
hello, i live in Greece and i ve got an older version of the low tech heel piece(grey -black) mounted on an adjustment plate and i am looking for the torch screws and nuts that are screwed on the adj.plate and the screws that would be used if the heel piece is mounted dirrectly on the ski.is there any hope?
if yes i would like to order a set for both heel pieces.
thank you
1/6/2017
Answer from jbo
 
Hi Dimitris, unfortunately those are a rare commodity and we don't have any at the moment.
Answer this question:

1/3/2017
Question from bmcches
 
Are the higher risers available for the beast heel piece?
1/3/2017
Answer from jbo
 
Hi bmcches, unfortunately we have no availability on those.
Answer this question:

1/2/2017
Question from MAVO
 
Hey J,

Will you guys be getting in anymore Radical ST Toeplates?

Thanks,
mv
1/2/2017
Answer from jbo
 
Hi MAVO, we will at some point but unfortunately don't have a specific date. Best bet is the B&D classics shims.
Answer this question:

12/22/2016
Question from Nate C
 
Hi Guys,

Do you have replacement heel reinforcements that are to be used with the Beast bindings?

thanks
12/22/2016
Answer from jbo
 
Hi Nate, we are expecting some soon. They are listed under boot parts.
Answer this question:

10/23/2016
Question from Thomas Gappmayer
 
Hi there,

Do you have the crampon receptor for Beast 16's? It's a thin piece of middle with two hooks on the end that sits outside the toe piece, and it mounts to the toe piece thru two screws. Thanks!

Thomas
10/24/2016
Answer from jbo
 
Hi Thomas, unfortunately that is not available as a separate part.
Answer this question: