7/13/2017
Question from Tommy Bass
 
I've browsed the old FAQ here and I hope I have not missed a duplicate to my questions.

1) Dynafit Superlite for current year Superlite BInding: Is the brake easily removable for certain tour and and backcountry needs, or is the process a little more involved?

2) I have read as many sizing questions as possible on the FAQ. I have BD Link 95s (slopping sidewall, 95 at edges throughout waist). Based on all the comments it seems likely the 90 brake will be fine. Does this seem right to you?

Thank you so much.

-TMB
7/13/2017
Answer from Trace Leches
 
Hey Tommy, thanks for reaching out.

1) The brake is extremely easy to install, slightly less easy to remove but still easy. There are two pins you'll need to push simultaneously to get the brakes off, which is much more difficult in the field than a warm shop, but can absolutely be done.

2) Without modification, no. If you bend them out a bit, you could totally get it to work. I tested the 90 brake on a DPS Cassiar 95, Movement Alp Tracks 94, and a BD Helio 95 and the brake didn't clear on any of them, but it was close enough that bending them just a smidge would solve those issues.
Answer this question:

5/22/2017
Question from Nathan
 
Hi, would the vertical ST brakes work with vertical FT bindings as well? Thanks!
5/22/2017
Answer from jbo
 
Hi Nathan, yes the same brakes are used for both bindings. They are also compatible with the Comfort bindings and 1st gen Radicals.
Answer this question:

5/5/2017
Question from Evan T
 
Hi,

Do you think 90 mm Radical 2.0 brakes would fit a 95 mm waist ski? If not, any idea when the Radical 2.0 100 mm brakes will be back in stock?

Thanks!
5/5/2017
Answer from jbo
 
Hi Evan, the 90s are fairly generous and fit around most 95s. Next size up is 105mm.
Answer this question:

4/24/2017
Question from rpkelly22
 
I am looking to swap my bindings around between a few skis. I have a few questions:
1) Is swapping relatively easy? As in, if I mount my bindings with Quiver Killers, is it relatively straightforward to move the heel between different brakes, or am I headed down the wrong path?
2) Does swapping the bindings around impact the warranty?
3) Does using these brakes purchased separately impact the warranty?
4) My current bindings are Radical ST 2.0 with 90mm brakes mounted on a pair of Volkl BMT 94 skis. The bindings are mounted boot center. I think that the brakes may have been bent slightly to accommodate this mounting. Would these mount okay on a pair of Dynafit Nanga Parbat skis? Or should I consider a different binding altogether as the ski is somewhat narrow?

I plan on buying an additional set of 120mm brakes for mounting on Dynafit Hokkaido skis.
4/24/2017
Answer from jbo
 
Hi rpkelly22, it's fairly straightforward to move the housing to a different baseplate/brake, which does not affect your warranty status. That said, it's not something I'd care to do daily. Be careful when screwing the rear adjustment screw as it can cross-thread. I doubt you needed to bend the 2.0 90mm brakes as they are fairly accommodating but also retract well for skinnier skis. I'd go with a lighter binding for the Nanga's :)
Answer this question:

4/8/2017
Question from Adam
 
Hello,

I have the Dynafit Speed Radical bindings on Soul 7's with a 106 underfoot; is there a brake that fits this binding? What size should I get will 105 be large enough?
4/8/2017
Answer from jbo
 
Hi Adam, unfortunately there isn't a brake for that binding. You could go with a universal system like the Kreuzspitze.
Answer this question:

3/22/2017
Question from Geoff Laird
 
Hi. I have a pair of Dynafit TLT FT12 bindings that I need to purchase brakes for. What model brake should I buy?
3/22/2017
Answer from jbo
 
Hi Geoff, if you have the Vertical series (triangular riser cone on the heels), the Vertical ST brakes will work.
Answer this question:

3/7/2017
Question from Jason
 
I have the Radical ST 2.0, looking for something around 110mm. Is there a best option?
Thanks!
3/7/2017
Answer from jbo
 
Hi Jason, you can likely fit the 105s around a 110 ski. Next size up is 120.
Answer this question:

2/19/2017
Question from Jan
 
Hey,

Wich one of the dynafit breaks do you recomment for a the dynafit speed turn bindings? If its even possible to use one breaks for that kind of binding?
2/19/2017
Answer from jbo
 
Hi Jan, unfortunately there are no brakes designed for the Speed Turn. You could do a universal system such as the Kreuzspitze.
Answer this question:

2/15/2017
Question from Sean
 
I have a pair of radical ft I want to mount on a ski that has 85mm waist. The current brakes are 130mm is there a replacement brake new/used that is small enough?
2/17/2017
Answer from jbo
 
Hi Sean, your best bet is likely to get the Radical ST 92mm brakes, and forego the linkage plate to the toe piece.
Answer this question:

2/7/2017
Question from Bruno
 
Hi! Im looking for a Radical 2.0 ST 105mm brake and Dynafit sent me to you guys but looks like you dont have it (or not in stock).
Could you please let me know if you will have it and when? Its for a Meteorite 97.

Thanks!
2/7/2017
Answer from jbo
 
Hi Bruno, it looks like those are going to be a few weeks out unfortunately. Something about a boat and the Atlantic.
Answer this question: