1/9/2018
Question from Mike
 
Would these work with Speed Turns with 4mm toe shims? Can I put a 4mm shim under them to make level? Thank you!
1/9/2018
Answer from jbo
 
Hi Mike, these work best with the toe flat on the ski. It's possible they will bend a little bit to be OK with a shim but it is not ideal.
1/9/2018
Answer from Yaspar K
 
Can I put a 4mm shim under the brake to make it level with the toe piece?
1/9/2018
Answer from jbo
 
Hi Yaspar K, yes that should work just fine!
1/9/2018
Answer from Yaspar K
 
Thank you thank you thank.
Answer this question:

9/3/2017
Question from SteveR
 
My Kreuzspitze toe pieces are mounted on the Kreuzspitze Toe Shift Plate. Would this brake still fit?
9/4/2017
Answer from Trace Leches
 
Hey Steve, thanks for reaching out. These need to be flush with the top-sheet, so if your toe piece is mounted on the shift plate it won't work. You could potentially fabricate an "extender" with a longer bolt to lift the locking mech off the top sheet in order to keep the brakes where they need to be, but just lifted a bit to match the height of the shift plate. In short, no, it won't work with the toe shift plate.
Answer this question:

4/8/2017
Question from Adam
 
I have Soul 7s with a 106 waist. Will the 105 brake be able to fit? I have speed radical bindings on them.
4/8/2017
Answer from Trace Leches
 
Hey Adam, if it's a true 106mm waist then you're probably good, however there is still potential for it to require bending to get it to fit. For what it's worth, I tried the 105mm brake on a DPS Wailer 106 and found that there was extra room. However, the sidewall shape can effect brake deployment and it may be different on your skis.
Answer this question:

1/11/2017
Question from Vlado
 
Hi, what size would you please recommend for the La sportiva RST 2.0 ski? It is 77mm in the waist. Will the 75mm break work? Thanks
1/11/2017
Answer from jbo
 
Hi Vlado, the brakes would likely require a little bending to get on the RST, which may compromise the stopping ability. The 90s would operate more easily.
Answer this question:

11/30/2016
Question from Joe
 
Oh... one last question - are thes compatible with G3 ION series. I suspect not, but it's worth asking
11/30/2016
Answer from jbo
 
Hi Joe, these won't work with the IONs unfortunately as they required a Dynafit-style crampon slot.
Answer this question:

11/30/2016
Question from Joe
 
I assume a 105mm brake fits a 105mm ski, or is that a tight fit and I should be prepared to do some bending?
11/30/2016
Answer from jbo
 
Hi Joe, yes it should. There might be an exceptional case for a big boot on a ski with a tight radius and steep sidewall, but you should be fine without bending.
Answer this question:

10/27/2016
Question from Lee
 
Can the 105 brake be bent out to accommodate a wider ski with a waist around 112mm
10/27/2016
Answer from jbo
 
Hi Lee, unfortunately they won't stretch quite that far and still work well.
Answer this question:

2/26/2016
Question from Steve
 
Would these work with the Dynafit Speed Turn 2.0 Bindings?
2/26/2016
Answer from jbo
 
Hi Steve, yes they work with any binding with a Dynafit-style crampon slot.
Answer this question:

2/22/2016
by JDT (used product regularly)
 
We paired these bindings with my wife's Movement Balance skis with Dynafit Superlite 1.0. She uses these skis as her primary resort ski as well as her BC ski. These work extremely well. Very simple and reliable. They are very easy to remove for BC use, and they easily slide into the crampon attachment when she skis at the resort. The "switch" which is mounted to the ski, under the forefoot is easy to use, and looks to be nearly weightless. There is no interference when entering or exiting the binding. Five stars for an ingenious, but simple design which works flawlessly.
Comment on this review:

1/21/2016
Question from Oscar
 
Hi! Are these stoppers compatible with Plum Guide bindings? And if so, I have a ski that is 93mm in the waist, will the 105mm break work or is it too wide?

Regards, Oscar.
1/21/2016
Answer from jbo
 
Hi Oscar, yes these will slide in the crampon slot of the Guide binding. 105 would work fine.
Answer this question: