2/3/2017
Question from Chance Ronemus
 
Will the TLT6 hard tounges work with TLT5's?
2/4/2017
Answer from Trace Leches
 
Hey Chance. The TLT5 tongues and TLT6 tongues are "tuned" slightly differently so they each carry different flex characteristics and shapes, but yes is the short answer!
Answer this question:

2/1/2017
Question from nicholas j
 
Would a stiff tongue from a 29/29.5 tlt6 work on my size 30 tlt5s?
2/1/2017
Answer from jbo
 
Hi Nicholas, the 29 tongues won't quite fit. You will end up with too much space in the instep.
Answer this question:

1/26/2017
Question from Schmidtlet
 
Hi, I lost a instep cord on my TLT 5. Do you have a product in stock that would work as a replacement? Thank you.
1/27/2017
Answer from Trace Leches
 
Hey Schmidtlet, we are sold out at the moment, unfortunately. I don't have a good estimate as to when we will get more in, but if you absolutely need it to ski, I have seen people use accessory cord in a pinch!
Answer this question:

1/20/2017
Question from Fritz
 
Hi there. The cables on the two lower buckles of my left Dynafit Mercury have broken. Can you tell me what parts will work for this? Can I just get the replacement cables or do I need new buckles, and if so do any of the buckles you carry work with the Mercury?

Thanks!
1/21/2017
Answer from jbo
 
Hi Fritz, you need to replace the whole buckle. Unfortunately we don't have availability on those.
Answer this question:

1/11/2017
Question from Jon
 
Hello,

I have a broken buckle on my tlt6cr boot. It's the part that clamps around the back of my boot and locks the boot from flexing forward - I've attached a picture as I don't know the proper buckle terminology and want to ensure I get the right part. Do you carry this?Are the rivets to attach it separate?

Thank you!
1/11/2017
Answer from jbo
 
Hi Jon, you'll need a TLT6 Right buckle & catch. It comes with rivets.
Answer this question:

1/4/2017
Question from Jim
 
Will the 6P cuff rivet replacement work on my DYNA boots? They are finally starting to get some slop.
1/5/2017
Answer from jbo
 
Hi Jim, they are the same size. Best long term solution is the UCP.
Answer this question:

1/3/2017
Question from Brad Taylor
 
I have a pair of 2008 DynaFit Zeus Boots. The top buckle extender has broken making it difficult if not impossible to buckle the boot in back country conditions. I have included a photo of the part I need. Please advise when convenient.
FYI - I need the silver buckle extender shown in the photo. It attaches to the buckle system via allen screw
1/3/2017
Answer from jbo
 
Hi Brad, unfortunately we can't get parts for the Zeus boot, it has been out of production too long.
Answer this question:

12/4/2016
Question from Dougal
 
Yesterday I broke the tongue of one of my dynafit zzero boots. I'm wondering if any of the tongues you have would work as a replacement.
Thanks,
Dougal.
12/4/2016
Answer from jbo
 
Hi Dougal, unfortunately there is not a tongue that would match well with the Zzeros.
Answer this question:

12/2/2016
Question from Marc
 
Hi Guys, I'm wondering if you sell just the replicable bracket on the TLT6 Spolier that the upper buckle goes into? Mine has developed slop over the seasons and I'd like to replace just that piece that is held on by 2 torque screws.
Thanks,
12/4/2016
Answer from jbo
 
Hi Marc, unfortunately that part isn't available separately. In theory the whole spoiler is, but parts for that model are quickly drying up.
Answer this question:

11/28/2016
Question from Jose
 
Hello, Did you guys received already hard tongues for the TLT6? Thanks!
11/29/2016
Answer from Trace Leches
 
Hey Jose, we are unable to order any more TLT6 tongues as they are "reserved for warranty purposes only."
Answer this question: