3/17/2018
by bobbytooslow (downright abused product)
 
Given that we use lightweight gear in remote places, these are a no-brainer. Less likely to pull out than traditional screws, and easier to swap out a binding piece that is damaged. Buy a few extra to practice on with a 2x4. Definitely soak them in degreaser (then dry) before installing. And use epoxy rather than wood glue.
Comment on this review:

2/15/2018
Question from Duncan
 
What is all included in the Pro Installation Kit?
2/15/2018
Answer from Trace Leches
 
Hey Duncan! Here's the text copied from the description: Pro Installation Kit that consists of three items: (1) a specially machined drill bit that stops at the proper depth for an insert, (2) a tap to cut a thread into the ski that matches the outer pitch of the inserts, and (3) an installation tool that allows you to screw the inserts in and then back the tool out. You can also buy each item individually, listed as "Step Drill Bit, Bottom Tap, and Installation Tool".
Answer this question:

1/11/2018
Question from Eric Liu
 
Will the inserts work well with the original screws shipped with Marker Griffon binding? Should I have to buy the screws with the inserts together?
1/12/2018
Answer from Trace Leches
 
Hey Eric! Thanks for reaching out! Nope, the inserts take a machine thread and the screws that shipped with the Griffon should be wood screws. If you're looking to buy a kit then you'll definitely have to get the inserts, machine screws for the toes and heels (keep in mind those are pretty regularly two different sizes), and also an installation kit unless you're going to have a shop do it!
Answer this question:

11/23/2017
Question from Elliot
 
Hi. Which fastener kit would work with the new Dynafit Speed bindings? Thanks!
11/24/2017
Answer from jbo
 
Hi Elliot, we're putting together a kit for that binding but they are about a week out.
12/6/2017
Answer from jbo
 
Hi Elliot, we have these available now in the drop list.
Answer this question:

4/14/2017
Question from Tristan Isfeld
 
How many Inserts come with the Stainless inserts for $1.95?
4/17/2017
Answer from jbo
 
Hi Tristan, that is the price per insert (quantity 1).
Answer this question:

3/22/2017
Question from Mat
 
Is it possible to bore out a preexisting hole and put one of the qk's in?
3/22/2017
Answer from jbo
 
Hi Mat, if you mean a hole for a normal mounting screw, then yes.
Answer this question:

3/16/2017
Question from Brent
 
I'd like to get a quiver killer package for the Kreuzspitze GT binding. Can you put that together for me?
3/16/2017
Answer from jbo
 
Hi Brent, it's available in the drop down as "Kreuzspitze Fastener Kit".
Answer this question:

3/9/2017
Question from Lyman
 
Is this fastern kit comes with all Phillis screws rather than Torx screws?
3/9/2017
Answer from jbo
 
Hi Lyman, they are Phillips by default, though we do have some sizes available as Torx. Let us know in the order comments if you'd prefer those.
Answer this question:

1/30/2017
Question from Cali
 
Is it possible to compile a kit so I could inter change Dynafit Speed Turn bindings with Marker Duke Bindings? Also I would need just the Installation Tool.
Thanks!
2/1/2017
Answer from Trace Leches
 
Hey Cali. Absolutely, though you may run into some hole pattern issues depending on if the ski has been mounted before. If you got the installation kit, a Speed Turn Fastener kit, and 34 inserts (for the Duke's 9 hole pattern) that should do it. Keep in mind, putting 17 large holes into each ski has a lot of potential to weaken it and isn't necessarily recommended, but as long as there is enough space between each insert this could be a very fun project. What ski is this going on?
Answer this question:

1/14/2017
Question from Jon
 
Does a fastener kit come with the inserts, or does it consist only of screws? In other words, if I get a speed turn 2.0 fastener kit, do I also have to buy 7 inserts? thanks!
1/14/2017
Answer from jbo
 
Hi Jon, the fastener kits are just the fasteners that hold the binding in the inserts. You will also need an insert for each hole. For the Speed Turn 2.0, there are 16 total holes for which you may want inserts.
Answer this question: