12/8/2016
Question from Željko N
 
Do you know which fasteners is compatible with ATK Raider 12 2.0 bindings?
Thanks
12/8/2016
Answer from jbo
 
Zdravo Željko, the 2.0 version uses the same fasteners as the 1.0 version. They are now listed as "ATK Raider" in the drop list.
Answer this question:

11/22/2016
Question from will c
 
If I still have my original screws from dynafit, will they match the threads of the insert? Also, will there be any height difference using QKs vs traditional binding mount?
11/22/2016
Answer from jbo
 
Hi Will, the mounting screws aren't compatible with the inserts. The inserts get embedded into the ski so the bindings sit flush per usual.
Answer this question:

10/24/2016
Question from Andy P
 
Will any of these kits work with a 2014 model Dynafit Low Tech Race binding?
10/24/2016
Answer from jbo
 
Hi Andy, yes that's the same as the Speed Superlite.
Answer this question:

5/6/2016
Question from Erik
 
I would like to quiver kill several skis.
4 skis with kingpin bindings
3 skis with salomon sth 12
I also need the pro installation kit what drill bit does the kit come with and do you have it all in stock?
5/6/2016
Answer from jbo
 
Hi Erik, the kit comes with a specialized drill bit that stops at the proper depth. We are a little short on quantity for all of that but have a shipment coming next week.
Answer this question:

3/24/2016
Question from albert
 
I'd like to install quiver killers for use with dynafit radical bindings. Can you please tell what you can assemble for necessary materials (inserts, screws, tap...).

Thanks!
3/24/2016
Answer from jbo
 
Hi Albert, we have the Installation Kit available with the drill bit, tap, and insertion tool. The Inserts are sold separately, you need 16 for a Radical. The fasteners are available in kits for each binding.
Answer this question:

3/19/2016
Question from Nick
 
Curious as to what length screw to use for quiver killing the KREUZSPITZE SCTT adjustable heel plate? I'm imagining the Speed Turn 2.0 fasteners are what I'm looking for but not positive. Thanks for the help!
3/19/2016
Answer from jbo
 
Hi Nick, actually you need flat heads for those plates, not the pan heads used for Turn heels. I just added a Kreuzspitze fastener kit for you.
Answer this question:

2/26/2016
Question from Tony
 
Any downside to using these on race skis other than the weight?
2/26/2016
Answer from jbo
 
Hi Tony, the ones we've done seem to be holding up fine. Installation effort is a downside.
Answer this question:

2/24/2016
Question from Andreas M
 
I'm a bit confused by the ordering options. I have installed Binding Freedom inserts on all my other skis, and would like to on a new pair of skis with a new pair of bindings, but they're out of stock of the appropriate screw lengths (12mm lowhead). According to Chris W's review, you can use BF / QK screws and inserts interchangeably. Is that correct?
Also, do the "Fritschi Vipec Fasteners - $5.95" include all 16 screws (8 ea 10mm smallhead, 8 ea 12mm lowhead)? So I'd just need to order 1 of that item plus 16 inserts?
2/24/2016
Answer from jbo
 
Hi Andreas, correct on all counts.
Answer this question:

2/5/2016
Question from Sam
 
i'm interested in the kit for the speed turn. I was wondering about longer ss screws that would allow me to use Quiver killers with b&d 6.4 mm shims. I also don't see a link to purchase the Pro Tool Kit? thanks.
2/5/2016
Answer from jbo
 
Hi Sam, you would need 16mm flat heads for that combo. We are currently out of stock on the insert kit, more expected next week.
Answer this question:

1/16/2016
Question from Eric
 
Jason - Do you have fasteners for speed turn and expedition heel pieces? Do you think the spacing between mount holes on these heels is sufficient?
Thanks!
1/21/2016
Answer from jbo
 
Hi Eric, the Expedition heels use the same fasteners as the Speed Turn toes, so you should be set with one Speed Turn kit. The spacing is probably sufficient for skis with reasonably reinforced mounting areas.
Answer this question: