12/11/2017
Question from Mirek
 
Hi
I have Dynafit TLT Vertical ST bingings. Unfortunatly one heel stand(handler) was broken (see attached foto). Do You have this spart part in stock? (I think that this is part number 4 on picture above).

Mirek
12/12/2017
Answer from eric
 
Mirek- You have to replace the whole heel housing to replace that tab. Unfortunately we do not have any at the moment. We get people trading in bindings and we then list the usable parts here. The heel should still function unless you want to use a brake in which case the tab is necessary.
Answer this question:

12/4/2017
Question from abp
 
I have a set of the old pre 2011 tlt speed heels (the grey ones) that both have cracked screw holes on the mounting plates, which from my experience is very common for that generation. Would the heel housing of those mount to the tlt speed plates you have listed here?
12/4/2017
Answer from Trace Leches
 
What's up Adam? Good to see your name come through here again! I think there's a good chance that'll work, but why don't you send a picture of your heel pieces to make sure we're talking about the same thing?
Answer this question:

11/25/2017
Question from Mike
 
Hi,

I am looking for the vertical ft heel plate, as the adjustment base broke. Do you have any?
11/25/2017
Answer from jbo
 
Hi Mike, no used ones at the moment, but we do have a few new parts.
Answer this question:

10/28/2017
Question from Aaron
 
I'm looking for the Radical Brake Retainer - Retainer "H" clip that holds Vertical, Comfort, and first-gen Radical brakes onto the heel piece. I think it is #9 on the diagram. Do you have one to purchase?
10/29/2017
Answer from Trace Leches
 
Hey Aaron, thanks for reaching out. We have those "H" clips in a box labeled "Gold" because they're so valuable, but unfortunately we are fresh out at the moment. Keep your eyes on this listing though, we get them in every so often and they will be available once they are listed.
11/1/2017
Answer from jbo
 
Hi Aaron, we just got a few of these if you want to grab one. It's labelled Vertical Brake Retainer.
Answer this question:

9/26/2017
Question from Mark
 
I'm looking a TLT Vertical Tri-Step toe plate replacement. Any chance you have this in your inventory?
Thanks!
Mark
9/27/2017
Answer from Trace Leches
 
Hey Mark, thanks for reaching out! I don't have Tri-Step toe parts, however, the toe plates on most of Dynafit's 5-hole pattern bindings are interchangeable. We just got in a bunch of Vertical ST Toe Plates that are compatible!
Answer this question:

6/19/2017
Question from Mark
 
You list a part for sale that doesn't have a description - the Vertical Crampon Receptor. Can you explain what part this is?

I need the "Vertical ST/FT Toe Plate" which apparently includes the crampon receptor. My need is for the front portion of the plastic baseplate - the ridges that engage the lever in tour mode have completely worn off on mine.
6/20/2017
Answer from Trace Leches
 
Hey Mark. Yup, you got it, the Vertical ST/FT Toe Plate includes the crampon receptor. The Vertical Crampon Receptor is just the little metal bracket that threads through the plastic plate. The complete Vertical ST/FT Toe Plate is what you'd need to get your toe piece back in working order!
Answer this question:

4/21/2017
Question from Nick
 
Does the Radical Toe Piece come in a set for 70 or 70 each?

Thanks
4/21/2017
Answer from jbo
 
Hi Nick, the parts are sold individually.
Answer this question:

4/4/2017
Question from Albert
 
Do you have two (2) Dynafit Vertical 82 mm brakes in your used parts inventory? If so, are they $15 each or $15 for two? Thx.
4/4/2017
Answer from jbo
 
Hi Albert, currently just one, priced individually.
Answer this question:

3/30/2017
Question from John
 
I need the riser tower that says ST on it. Old tlt bindings pictured. My heel riser snapped off.
3/30/2017
Answer from Trace Leches
 
Hey John. I am assuming you mean that the Vertical binding that is pictured is the one that you currently have, in which case Dynafit has stopped supporting that model so an aftermarket solution from B&D Binding Parts is your best bet. You'll need a new roof and Volcano.
Answer this question:

3/27/2017
Question from Sarah
 
I have a pair of old dynamite bindings and the plastic piece under the toe broke - it's #1 in your figure shown, but I didn't see a key so I'm not sure which part to order. I'd probably get 2 so that things will match - my bindings are silver, including the plastic plate below that broke, so I'd like to match. I'm assuming the plates underneath are universal? If not, what can I do to check? I bought these used this year so I don't know what the exact model is, but it's probably from 2006-ish. Thanks for your help!
3/28/2017
Answer from jbo
 
Hi Sarah, I wouldn't say anything is universal in this game! Feel free to send us a photo to double check your version. There is a good chance the Vertical ST toe plate would work, but I can't be sure without a photo. It certainly won't match the color though.
Answer this question: