10/25/2015
Question from gaby
 
Hi, its possible to cut this skin and use the Pommoca race tip accesory to use bungee style in my race skis when need extra grip?
thanks!
10/25/2015
Answer from jbo
 
Hi Gaby, absolutely. You can make a full coverage skin for race skis. It's probably cheaper to get some skin material off one of our rolls instead of buying a kit with a tip you don't want, but you certainly can sever these.
Answer this question:

9/29/2015
Question from svcci
 
POMOCA CLIMB PRO GLIDE SKINS
what size would you recommend for my black crow camox freebird 177??
9/29/2015
Answer from jbo
 
Hi svcci, the 120mm width would be ideal. You could use either the 166-177 (medium) length or the 176-187 (large). The former would save a bit of weight while the latter would have more coverage at the tail and leave more length in the tail strap for grabbing and peeling.
Answer this question:

2/17/2015
Question from karen
 
i have salomon q-103 stella skis. 172 length waist 103 tip 122. what size would i need?
2/17/2015
Answer from jbo
 
Hi Karen, you'd want the 120mm x 166-177 for nearly-full coverage on those (I believe the tails are 122 and the tips 130). Unfortunately we are out of that size.
Answer this question:

1/18/2015
Question from Geoff
 
Do the climb pro glide skins that you carry have the European glue or the North American glue? What size to you recommend for a
BD Drift 176 cm ( 136 mm, 100 mm, 122mm)?
1/18/2015
Answer from jbo
 
Hi Geoff, I'm not sure how to tell the difference, but these came through the North American supply channels and all are current for this season (14/15). The 120s would be good for that ski; that provides full coverage in the tail where you get your grip. Full coverage in the tip is a bit excessive imho.
Answer this question:

12/18/2014
Question from Kyle
 
How much do these weigh?
12/18/2014
Answer from jbo
 
Hi Kyle, it's a bit hard to objectively measure skin weight, since they come in tons of sizes and get cut differently for each ski. They also ship with various backing materials that affect out-of-the-box weight. This is a long winded way of saying I have no idea, but I can say they are much lighter than your average pile of nylon.
Answer this question:

11/26/2014
Question from Chris
 
Hi, what size tip buckles are included in the climb pro glide 120 and 140 skins?
Thanks
11/27/2014
Answer from jbo
 
Hi Chris, here is how they are currently shipping:

100mm : 72mm installed, 80mm in box.
120mm : 95mm installed, 105mm in box.
140mm: 105mm installed, 95mm in box.
Answer this question:

4/22/2014
by Brett N (used product regularly)
 
Great product, used about 20 times. Offer the ultimate in glide and grip. I have also found these skins to be very good in conditions that would normally produce glopping. Glue is awesome, easy to rip skins, but doesn't fall off the base. Highly recommended.
Comment on this review:

2/24/2014
by dub_xion (used product a few times)
 
Have used these a few times in the Cascades. Did a few laps up on Hyak at temps right at 32 degF and some sleet and there was no gloppage. Good glide and light weight and the glue seemed to stick well to the skis, even after a few laps. Snow that did happen to get packed on the glue side was pretty easily removed by rubbing it on my nylon/softshell clothing. Also, separating the skins from themselves, even new, is a *lot* easier than new BD/G3 skins I've experienced in the past.

The trim tool is fantastic!! So glad skin manufacturers are coming up with different ideas on these. Trimming was a 10-minute job and very clean.

Minus one star for the tip loop attachment system on my skis. I think it would work great for skis with a sharp-ish tip, but I've got some Blizzard Kabookies with a fairly blunt tip, and they just kind of sit at the very end. I've been in touch with Pomoca and apparently they might make a wider bar next year which will alleviate the situation. They are working ok for now, so I'll wait for the wider bar rather than change to a different loop system, as I like the low-profile design of this system. I think they would work great on 95% of the skis out there that are <95mm and/or don't have a blunt tip.

Tail attachment works well and is easily adjustable.
12/18/2015
Reply from dub_xion
 
Just an update on the tip loop - it looks like this year's system is vastly improved over the previous cable system, so please disregard my comments on that from last year.
Comment on this review:

2/23/2014
by Andy (used product regularly)
 
I have these custom cut to Movement Goldfish-X. I have used them for about 15,000 vertical feet and they have performed quite well. Great grip on any skin track I've been on and great glide on flat terrain and low angle slopes. I've had Dynafit Speedskins and these are exactly the same save for the tip and tail attachments.

For reference my tips were replaced with top fix race attachments so that I can rip the skins off from the tip with skis still on. Jason at skimo did a great custom job on these!
Comment on this review:

2/12/2014
by T Beck (used product a few times)
 
I love the dynafit skins and these seem to be the same product and behave accordingly. I love the glide and grip ratio as well as how supple these skins are.... I was unimpressed with the tail clip and two of my good friends had severe glue failures after only a few uses. They both bought from the same discount supplier and most likely both got the same bad batch....hopefully it was a fluke.
Comment on this review: