8/31/2018
Question from KP3
 
Pretty impressed with the hands on responses and knowledge here. I'm still riding the old Stoke 183s. What's my best bet as the glue is wearing thin?
8/31/2018
Answer from Trace Leches
 
Hey KP3! Thanks for the feedback! Good news: there are a lot of options. If the glue is balling up or getting gross and slimy then your best bet is to strip that layer of glue off and expose a new one. You can do this by taking a sturdy paper grocery bag (not a thin one like a brown paper lunch sack though, those will tear) and ironing it on to the glue until you start to see a bit of moisture seep through. Then just peel it off and it'll "refresh" the glue by exposing a new layer. If the glue is actually coming off or it's getting thin then I'd touch it up in the bald spots with new glue or, depending on how bad it is, just reglue the whole dang thing. The Dynafit skins are made by Pomoca and the Pomoca Skin Glue can be found in here under "Adhesive Tube." You can use a credit card or something similar to evenly apply the layer of glue.
Answer this question:

5/1/2018
by Andrew B C (downright abused product)
 
I have these for my Manaslus, my wife's Manaslus, and my Cho Oyus. Work great gliding, climbing, traversing; attacment setup is the best around. Glue gets sticky after awhile but they reglue easily. I've renewed the waterproofing with Nikwax and will use BC glop stopper on those days. Even so, I prefer the Pomoca Climb Pro Glide and the S Glides will probably be the next skins I buy--they haven't been quite as ready to glop with snow and seem to climb a little better.
Comment on this review:

4/18/2018
Question from Barbara
 
Hi
I need to replace the skins for my original Dynafit Baltoro woman's ski - length 158cm. Would these dynafit speed skins fit my skis?
Thanks
4/19/2018
Answer from Nate
 
Hi Barbara, since your Baltoro model has been discontinued there is unfortunately no longer a Speedskin available for it. We do have the necessary parts available as well as a broad variety of material to choose from if you'd like to build your own set.
Answer this question:

4/12/2018
by Pete (used product regularly)
 
Using them on Carbonio 88s, perfect lightweight high speed skin.

Work beautifully if used on the exact ski and length they are cut for, there's close to no adjust-ability so you truly need the exact length and model ski unless you're willing to cut the tail clips off. No buildup of snow under the nose, and no skin failure from the tail, because they have a metal loop acting as the tail clip.

Can rip skins from the nose which is always more pleasant than from the tail.
Comment on this review:

2/11/2018
Question from Kyle
 
I have an older pair seven summits 170cm. What works?
2/12/2018
Answer from Nate
 
Hi Kyle, Dynafit no longer makes a speedskin for that ski. I've checked our inventory and can't find another model that would be compatible. We're happy to build you some skins though! We have the Dynafit tips and a lot of materials to choose from and tail clips.
Answer this question:

1/27/2018
Question from Mike Tennery
 
I have Dynafit Hokkaido Ski 176. Which of the Dynafit skins should I use?
1/27/2018
Answer from Rebekah S
 
Hi Mike,

Unfortunately we don't have any Dynafit skins that would work for that ski. You could consider the Climb Pro S-Glide as an alternative. I'd get the 140mm x 165-180 cm, and then cut them to fit your ski.
Answer this question:

11/11/2017
Question from John
 
Looking for dhaulgiri skins for 177cm. Is it true you're out of stock?
11/12/2017
Answer from jbo
 
Hi John, unfortunately those are gone for good.
Answer this question:

8/22/2017
Question from tootall
 
i have a pair of grand teton 191 and 108 under the foot. any one have any ideas on a dynafit speed skin i could make work?
8/23/2017
Answer from Trace Leches
 
Hey Tootall! Thanks for reaching out! Ideally, your best bet would be to get the precut Teton skin, though to my knowledge they haven't been available for a little bit. One option is to get a pre-built skin kit and just not use the tip notch on the Teton. If you can't get away from the tip notch though (I wouldn't blame you if you couldn't I don't think I'll ever be able to) then making a skin is probably your best bet.

We will have full stock of material in a few weeks and making a skin for Dynafit skis is actually really simple if you have a hammer and a nail. Send me an email or give us a call if you have any further questions!
2/16/2018
Answer from Deling R
 
I have a pair of Dynafit Stoke, which is identical to Grand Teton. I have asked Dynafit and they told me they no longer make skins for Stoke and Grand Teton :(. I LOVE the tip notch. It works so much better than any other attachment mechanism I've seen.
How do you attach the tip to another skin? It looks like it's sewn on.
2/16/2018
Answer from jbo
 
Hi Deling, easiest is to cut a hole in the skin, feed the tip through, and fold the skin over the metal bar attached to the rubber tip. Then rivet or possibly sew if that's your bag.
Answer this question:

6/22/2017
Question from Ryan Kelly
 
Hello!

Thanks again for you help this past winter with some replacement kit parts. The backcountry Sierra Nevada red fox research was incredible and we got two new fox detections in the park.

So...I'm still skiing on my old Dynafit Stokes 167 cms. What are my options for tracking down speed skins? Gotta any laying around?

Thanks!
6/22/2017
Answer from Trace Leches
 
Hey Ryan! Glad we could help the Red Foxes! I don't have any Stoke skins left, and from what I remember the Stoke was only offered in a 164cm, not 167cm, but that may work out in your favor because we ordered a ton of the Huascaran 167 skins for this exact purpose. The Huascaran skin is just a wider and slightly longer version of your Stoke, so you could just cut the Huascaran skin down to the proper length and then trim down the excess width.
9/26/2017
Answer from Ryan K
 
You were correct on the Stoke size: 164 cm. Whats my best bet for rigging a speed skin for this size? Thank you!
9/27/2017
Answer from jbo
 
Hi Ryan, I'd get that Huascaran167 skin, cut off the tails (optionally adding new hooks), and trim the edges.
Answer this question:

4/1/2017
Question from Kathy
 
I have 171 seven summits. I'm assuming these will be a fit for them? thank you!
4/3/2017
Answer from jbo
 
Hi Kathy, we are out of the matching skins for the Seven Summits unfortunately. You could cut down a bigger Dynafit skin and add some tail clips though.
Answer this question: