5/23/2017
Question from Teal
 
Hi I wear size Mondo 28 in both TLT6 and Mercury boots. They have the 28/28.5 shell size. What size would I order for the PDG? I have a low volume foot, but my street shoe size is 11.5 US. Thanks!
5/23/2017
Answer from Trace Leches
 
Hey Teal! It depends on how the TLT6 and Mercury fit you, but combining that info with your street shoe size, I would recommend the 28.5/29 shell. One of our employees wears a 10.5 shoe and is in the 27.5/28 shell, by that theory a 28.5/29 would likely fit the best.
Answer this question:

4/27/2017
Question from Ben
 
How does this boot compare to the DYNA evo? I currently have the older DyNA Carbon EVO with the split sole 2014 Maybe? and I was curious about how they would compare to the PDG in stiffness and sizing.

Thanks,

Ben
4/27/2017
Answer from jbo
 
Hi Ben, sizing is the same and stiffness/skiability is likely stiffer/improved with the PDG. Any loss of stiffness from the cuff material would be counteracted by absence of a flex-zone in the forefoot and lack of slop (which has likely developed in your rivets and buckles).
Answer this question:

1/29/2017
Question from Mary Metcalf
 
I have just purchased the Dynafit PDG boots in size 23.5. I read on a review somewhere that is was better to get them small as the liner does stretch. I think the perfect fit would have been a 24 but it was not available. I returned the 24.5 as it seemed like it might be too large. My daughter told me that I should be able to just fit my fingers behind my heel when I put my foot in the shell without the liner and I had way more room than that. The 23.5 however are a bit tight. My toe just touches the end of the insole. Should I have the liners professionally fitted, or wait and try to find a 24?
Thank you,
Mary
1/30/2017
Answer from jbo
 
Hi Mary, your toe just touching the end of the liner sounds like a good length fit. Skiing or a heat mold would break that in further. We're happy to walk you through a shell fit over the phone if you'd like as well. We can send you a 24.0, but note it's not materially different than the 23.5 after break-in.
Answer this question:

1/8/2017
Question from Anton S
 
Hey,

I just wore Dynafit TLT7 size 28 and they worked incredibly well for me (perhaps a little too long, but just right width-wise and I have wide feet). What size Dynafit PDG should I get? My main concern is usually the width. Thanks!
1/8/2017
Answer from jbo
 
Hi Anton, lengthwise you'd also be a 28. Width might be tight, it's a narrower boot than the TLT7 Performance. You may have to stretch or find a different model. Visit our boot fitter for a specific recommendation.
Answer this question:

1/2/2017
Question from Kristian
 
Hi.
Can you confirm that the size 28,5 and 29 are the same shell size also for the 2016/17 model? Is the liner any different or is it only the footbed?
Thanks in advance.
1/2/2017
Answer from Trace Leches
 
Hey Kristian. Yup, the 28.5 and 29 share the same shell. The liner did trim up a bit for the new model. The biggest difference is that the liner sits a bit lower around the front and both sides of your calf, yet maintains the same height in the back.
Answer this question:

11/23/2016
Question from Erik
 
Hi.
Looking for a new training boot in this weight class ~800 g
What are the most narrow and low volume boot? The PDG or the the Syborg or other?
The first gen TLT6 are ok for my foot, but a little too wide to be perfect.
11/25/2016
Answer from Trace Leches
 
Hey Erik, the PDG seems to feel a bit narrower in the forefoot than the Syborg does. However, the Syborg feels a bit narrower in the heel though. Why don't you fill out our Boot Fitter and we can talk a bit more in depth about the history of your boots and shape of you foot?
Answer this question:

11/20/2016
Question from Spindogg
 
hey guys
my TLT5s are actually 297 mm BSL not 287. So as far as i know they are size 27s. It looks like the BSL i want for PDG would be 299. Is that a 27.5/28 shell?
it looks like a 27 in the PDG would be one size smaller. What size PDG do you recommend?
11/20/2016
Answer from jbo
 
Hi Spindogg, aligning BSL isn't a great way to size a boot as it doesn't correlate well with internal length across models these days. Yes a 297 would be a 27 shell. It's possible you could get a performance fit in a 27 PDG since they are a bit wider. It might be short though, in which case you'd need a 27.5 and hope it isn't too sloppy. I'd give us a ring to walk through a shell fit on length with your current boots handy. 801-942-9084.
Answer this question:

10/31/2016
Question from Spindogg
 
hey guys
i've been in the Dynafit TLT 5 and it's a 287 boot sole length. The boot fits perfectly. What size in the new PDG would that be?
10/31/2016
Answer from jbo
 
Hi Spindogg, the 26.5 should work well for you.
Answer this question:

10/27/2016
Question from Andy
 
Will a 26.5 PdG have the same sole length as a 26.5 TLT6? Or will I have to remount bindings?
Thanks,
Andy
10/27/2016
Answer from jbo
 
Hi Andy, the PDG soles are 289mm whereas the TLTs are 287. Close but not quite!
11/12/2016
Answer from Andrew F
 
Is the price/model year right for the 26.5?
Answer this question:

10/6/2016
Question from Kevin
 
Hi, i'm looking to buy a light weight boot the old boots i'm skiing in are garmont mega-rides size 27.5, I wear a 10.5 in most shoes can you recommend a size in the dynafit pdg or the la sportiva syborg?
10/6/2016
Answer from jbo
 
Hi Kevin, that is easy, I'm also a 10.5 and fit the Mega-Ride 27.5. You want the 27.5 PDG or 28.0 Syborg.
Answer this question: