2/26/2018
 
Hey Erik! Not sure if it's actually been done before but I've had this talk multiple times, including with myself. The forward lean isn't quite where I want it to be either. A less permanent (and potentially warranty voiding) solution would be to put some foam on the back of the cuff of the liner to just bump your lower leg a bit further forward. We've done that many times on these boots before to account for tiny calves or not enough forward lean.
2/26/2018
 
Hey Randall! You'll need to buy new baseplates in order to get these brakes to mount. Send me an email with a picture of your heel piece to our help email address at the bottom of the page and I'll see what I can do!
2/25/2018
 
Hey Tim! Why don't you fill out our boot fitter form and our boot fitters will get back to you about the fit! Tough to say exactly as we've never carried Dalbellos so we admittedly don't have a ton of time with them, but the boot fitter gurus seem to have more knowledge than I care to ever desire! Cheers!
2/25/2018
 
Hey Grayson! For the Vertical FT you'll need the Classic 6.4mm as well as the 6.4mm Classic Extensions to support the baseplate so it's not hanging out in space collecting snow. The screws you're shooting for are the 28mm screws, but they need a bit of modification (to account for extra length). Unfortunately the Vertical FT has an interesting screw length and when you shim it 6.4mm you'll need something in the realm of 25mm. Another easier, but less awesome solution is to get the 4.7mm version shim and t...
2/23/2018
 
Hey David! The skin/glue formula is made by Contour and unfortunately all of their glue renew kits and whatnot are for the non-hybrid glue formulas that weren't used in this skin formula. They can be washed though, are the skins just dirty and that's causing them to not stick? If so, find the wash stuff here.