Daniel L

Picture is attached for reference

I purchased these with the intent to remove the r01 (5.5mm) and add the ATK toe shim (4mm) to my Kuluar 12 SL. When I put the heel and the toe piece side by side in this configuration, the toe pins sit higher than the rear attachment point, probably by 3mm, but they should be 2mm lower (11.5-5.5-4=2). Any insight?

I have a zero g tour pro 30.5 that I want to fill a bit more volume in. I’m usually a 29.5 for a super tight shell fit but had to size up for walkability, toes press hard to the front on a forward stride on all the models I tried. No 29.5 touring boot fit my narrow long feet and stock liners don’t take up enough room, the top buckle feels correct on the unmolded liner after moving the ladder and clipping to the last rung. 1.5 finger shell fit but the main issue is higher cuff volume, could probably take up...

Would the 23.5 pozi also work for stacking AL14 shims?