The Ultralight liners from Palau are designed for skimo racing boots and other high performance applications. With an overlap design, they hug your calves while keeping the snow off your socks. The highly-rated EVA foam is thermo-moldable and adapts to your ankle movement. They are secured at the top with an elastic strap. The Palau ultralights are designed to be compatible with Al..
Palau liners are made with 100% highly rated EVA foam. The thermo-moldable foam is closed-cell which maximizes thermal retention. Palau make their liners with a dense cut of the foam that retains its shape after a heat mold or some skiing. That is why they were chosen as the liner supplier for Dynafit, La Sportiva, and other well-known boot brands. Now you can get replacement liner..
Deciphering Palau’s designation “Powertrack 10” is straightforward. The number 10 indicates the generous 10mm thickness. The “Power” comes from the mid-density EVA foam that is designed to boost your boot’s skiing performance. “Track” is short for “skintrack”, meaning the liners are pre-approved for uphill travel. The liners are so comfy you’ll want to ski 8 days per week, keeping ..
Closed-cell EVA foam is known for its ability to hold a mold. That means after having your liners heat molded, it won’t start to return to a former shape and crowd your feet. The foam is also warmer than some other liner materials and is very dense which helps in high-performance skiing. All Intuition liners are made with specially formulated close-cell EVA foam, which is why they ..
If Febreeze is no longer a match for your liners, it may be time for a replacement. It’s also time if you’ve ripped out the tongue, completely worn them through at the rivets, or packed them out beyond recognition. Look for replacement Dynafit liners here, all of which are thermo-moldable (TF) so may even fit other boots.
Dy.N.A. EVO – Race liners are thin and some of the first ..
Racing and touring is hard on liners. Sweat builds up; articulation causes chaffing. Replace your SCARPA boot liners with a fresh pair, listed below by model.
Alien 1.0 - Intuition Light liner is as snug as a sock. In fact, you have to put it on before putting on the shell. Moldable, but thin so you won’t get too much extra room.
Alien - Also an Intuition liner designed speci..
Seal up your race boots with gaiters from Crazy Idea. The CI gaiters keep snow off your liners, which is especially nice when you’re using race boots for adventure skiing. The gaiters are locked in place with stirrups and stretch-woven fabric. There are cutout areas for Dynafit UltraLock, Alien, and Syborg boot buckle systems. This means you don’t have to futz with your pants when ..
The extra-terrestrial design of the SCARPA Alien / Alien 1.0 boots has one major consequence of shaving all those grams: the liner is exposed to the elements. Remedies include wearing skin-tight suits with stirrups, using this handy gaiter, or only skiing in the summer. The simple waterproof membrane slides over your boot and helps keep out that annoyingly soft "powder" snow that n..
Here lies some common hardware that can be useful in keeping your alpine touring ski boots in working order.
Chicago Rivets - Sold individually, these rivets screw together so you don't need a press to fix riveted buckles and other parts. The flush heads are gentle on plastic and carbon fiber. Use with Vibratite to keep the rivets from unscrewing. Three lengths available: 3/16",..
Light ski boots tend to be made with thinner plastic and liners. That means you have less material insulating you from the cold. Instead of going heavier for warmth, just slip on some hip boot gloves. These neoprene insulators have simple elastic Velcro straps that securely wrap around a ski boot to add warmth. They block the wind and trap air which acts as insulation. The Boot Glo..
The only drawback to the Speed Nose on the Dynafit TLT7 boots is that it doesn’t support crampons with automatic toe bails (the simple wire that wraps around the toe welt). The solution is to get a semi-automatic crampon, or modify your auto with this adapter. Remove the simple wire bail and replace it with this gizmo that fits into the toe fittings and securely wraps over the top ..
Break a buckle or lose a tongue? Don’t run to the checkout with a new boot just yet; check here for spare parts first. This is our small but growing collection of Dynafit boot parts. Most everything is sold in pairs, one for each boot (unless specified as left or right).
Boot Heel Inserts - AKA Heel Tech Inserts, these are the bits of metal that allow boots to click into Dynafit..
This is the place to find replacement boots parts for La Sportiva ski boots. You can also use some of these parts on other boots if you’re in a mod’ing mood.
Pegasus Buckles– Replacement buckles for the Spectre and Sparkle boots. Simple lightweight buckles that can be adapted to other boots as well. Catches sold separately.
Pegasus Buckle Catches– The catches for the Pegasus ..
Wear out your instep cable? Break a buckle on your Backlands? Check out our offerings of Atomic replacement parts for your boots.
Items in these listings are sold as single parts unless listed otherwise:
Backland Frictionless Pivot- Keeps the cuff rotating around and attached to the lower shell
Backland Cuff buckle- Upper buckle on the cuff for all Backland boots
The Atomic Quick-Click tongue system allows you to transform your Backland boots from excellent up-hillers to excellent down-hillers. Or you can get a compromise tongue to handle a little of each. Choose from the options below, which are interchangeable amongst all the Backland models. The tongues are divided into groups of two shell sizes, e.g. one tongue will work from size 26-27..
Cuff pivot points are a typical wear point on alpine touring ski boots. Constant motion around the pivots causes friction that can slowly erode the surrounding material. This eventually leads to some play around the pivots, which can make skiing less precise. B&D Ski Gear has come through with a solution to this problem in the form of metal-on-metal pivots that are hard enough ..
The Carbon insoles are Superfeet's lighest and thinnest model. They offer stability while racing and touring without weighing you down or squashing your performance fit. Made with carbon fiber and ultralight foam, the insoles help keep your heel in place while providing arch support for medium to high arches. They also add a little insulation between your foot and the snow.
The Hot Pink insoles are Superfeet's women's specific model. They offer dual layers to provide the most warmth touring. Made with Outlast top sheet dual thermal foam, the insoles help keep your heel in place while providing arch support for medium arches. They also add lots of insulation between your foot and the snow.
Outlast construction for warmth..
Washable with soap, w..
As Superfeet’s most popular insole, the Green model fits the most feet. With a fairly high, well-placed arch and an ample heel cup, the green offers good support for skiing. It also features heavy-duty shock absorption which appeals the resort crowd and hucksters. It’s rather high volume so great if you are trying to take up some space in your ski boots to achieve the right fit. Ge..
The Blue insoles are Superfeet's middle of the road model. They offer stability while racing and touring. Made with structured heel cup and full length foam to provide support for every step. The insoles help keep your heel in place while providing arch support for medium arches. They also add some insulation between your foot and the snow.
Thin construction is great for all ..
The Merino Grey insoles are Superfeet's based off their super popular green model. They offer good shape and stability with warmth of a Merino wool top sheet. Made with structured heel cup and full length foam to provide support for every step. The insoles help keep your heel in place while providing arch support for high arches. They also add insulation between your foot and the s..