Hello, I am looking for a baseplate for a dynafit Vertical FT 12 binding? Do you buy chance have any old spares laying around or no where I could find one? Salewa does not have them.
Thank you!
Dynafit Plates & Bases
Toe plates, heel plates, extension plates, and more. These are all the parts you need to make new those hand me down Radical or Vertical bindings. Please note that heel bases with integrated brakes are listed in our brakes section.
Speed Radical Heel Base - Adjustable base with tower that holds Speed Rad heel housings.
Radical ST Toe Plate - The plastic riser plate under the Radical ST 1.0 toe piece, also works to shim the Speed Radical.
Radical FT Toe Plate - Almost the same plate as above, but not quite; specifically for the Radical FT 1.0.
Radical FT Connector Plate - The stiffening connector between the toe and heel, complete with a shock absorbing lockout. V1.0 bindings.
Radical 2.0 Toe Plate - The front rotation unit under the toe of the Radical 2.0 and Beast 14 bindings.
Radical FT 2.0 Toe Plate Extension - The support platforms around FT 2.0 toes that distribute force over a wider area. Can upgrade ST 2.0 toes.
Speed / Blacklight Long Rail - Increase the adjustability range on the heel of your Speed or Blacklight binding to a whopping 60mm with a pair of these. Note this plate is not compatible with the Blacklight / Speed brakes!
All bases and plates are sold individually (x1) (Except the Speed / Blacklight Long Rail, which comes as a pair).
Related Products
» Browse more
Dynafit Binding Parts
Questions & Reviews
4/21/2015
4/21/2015
Hi Preston, unfortunately we are down to just toe plates for the Vertical FT. You can check our listing for used parts from time to time, or send us your working parts for some store credit towards a new binding.
Answer this question:
1/10/2015
Question from
Charlie 
Thank you for making repair parts available on the web!
When might you expect to get vertical heelplates (or speed turn, speed classic, TLT, etc. heelplates) back in stock? I've got two pair I'd like to replace (comfort and TLT).
Thanks!
When might you expect to get vertical heelplates (or speed turn, speed classic, TLT, etc. heelplates) back in stock? I've got two pair I'd like to replace (comfort and TLT).
Thanks!
1/12/2015
Thank you for visiting our corner of the web!
Good question, last I checked on Verticals/Comforts, they were long gone, even from the warranty dept at Dynafit. Will go hunting again and follow up with you.
Good question, last I checked on Verticals/Comforts, they were long gone, even from the warranty dept at Dynafit. Will go hunting again and follow up with you.
Answer this question:
10/16/2014
Do the toe plates come in sets, or individually?
Also, what is the thickness of the Vertical ST toe plate? Is there any reason they wouldn't work with the Speed Turn toe pieces I just got?
Lastly, are you going to offer the Dynafit retrofit "Speed Radical Anti-Twist Device"? Or is that something I should take up with them directly?
Thanks!
Also, what is the thickness of the Vertical ST toe plate? Is there any reason they wouldn't work with the Speed Turn toe pieces I just got?
Lastly, are you going to offer the Dynafit retrofit "Speed Radical Anti-Twist Device"? Or is that something I should take up with them directly?
Thanks!
10/16/2014
Hi Peter, the toe plates are priced individually in case you need one as a replacement.
The Vertical ST toe plates are ~6.5mm thick under the cast metal vs ~1.5mm for the Speed Turn / Classic. The mechanical part of those bindings are identical so you can swap plates to reduce your pin height delta by 5mm.
Dynafit does not have the anti-twist device available at this time and it's unclear whether it will be offered this season. We are currently recommending the Maruelli solution while that is being sorted.
The Vertical ST toe plates are ~6.5mm thick under the cast metal vs ~1.5mm for the Speed Turn / Classic. The mechanical part of those bindings are identical so you can swap plates to reduce your pin height delta by 5mm.
Dynafit does not have the anti-twist device available at this time and it's unclear whether it will be offered this season. We are currently recommending the Maruelli solution while that is being sorted.
Answer this question:
9/11/2014
Is the tlt speed radical toe plate the same as the tlt speed?
Do these come in sets of 2?
Thanks!
Do these come in sets of 2?
Thanks!
9/11/2014
Hi Doug, the Speed Radical doesn't have a toe plate, but you can use the Radical ST & FT plates as shims for it (they are the same toes mechanically). The TLT Speed toe plate is for an older model of Dynafit bindings. They are priced individually in case you need just one as a replacement part.
Answer this question:
4/19/2014
looking at your 'speed radical heel base'. I have some speed turn (new style) heel pieces that I could potentially swap onto these baseplates. However, I assume that your radical baseplate posts have only one touring position for the heel piece / thimble to sit in (not including downhill position). Is this correct, or are there three touring positions (beveled flat spots for the thimble to sit) just like there are my speed turn heel post?
thanks
thanks
4/20/2014
Hi Jeff, there are a total of two flat spots on the Radical base plates that the thimble can rest on, one of which is for skiing. You wouldn't have the full Speed Turn functionality on those posts.
Answer this question:
1/20/2014
What toe spacer fits the DYNAFIT SPEED RADICAL BINDING.
1/20/2014
Hi Kobe, the Speed Radical doesn't officially have a spacer, though you can use the Radical ST toe plate to raise it up. There are also some aftermarket shims available from B&D ski.
Answer this question:
Prices here are superior to ordering from Salewa NA. I just ordered a replacement set of Vertical ST toe plates, and from Salewa they were 30 bucks shipped. I wish I'd stumbled across this section of Skimo sooner. I've got some new thimble bushings on the way to my spare parts bin as soon as I order something larger to share shipping.
Comment on this review:
Earn store credit by writing reviews. Learn more.
