Toe plates, heel plates, extension plates, and more. These are all the parts you need to make new those hand me down Radical or Vertical bindings. Please note that heel bases with integrated brakes are listed in our brakes section.
Speed Radical Heel Base - Adjustable base with tower that holds Speed Rad heel housings.
Radical ST Toe Plate - The plastic riser plate under the Radical ST 1.0 toe piece, also works to shim the Speed Radical.
Radical FT Toe Plate - Almost the same plate as above, but not quite; specifically for the Radical FT 1.0.
Radical FT Connector Plate - The stiffening connector between the toe and heel, complete with a shock absorbing lockout. V1.0 bindings.
Radical 2.0 Toe Plate - The front rotation unit under the toe of the Radical 2.0 and Beast 14 bindings.
Radical FT 2.0 Toe Plate Extension - The support platforms around FT 2.0 toes that distribute force over a wider area. Can upgrade ST 2.0 toes.
Speed / Blacklight Long Rail - Increase the adjustability range on the heel of your Speed or Blacklight binding to a whopping 60mm with a pair of these. Note this plate is not compatible with the Blacklight / Speed brakes!
All bases and plates are sold individually (x1) (Except the Speed / Blacklight Long Rail, which comes as a pair).
Hi! I have a broken TLT Speedfit TOE plate as per attached pictures. I've seen you have a TLT SPEED (not Speedfit, though they seem the same to me) toe plate. Does that fit my broken one? Many thanks! (I'll take ti right away if it fits!)
Hi Ionescu, unfortunately not. The TLT Speed is an old-school binding with a rotating heel, aka classic Dynafit. We don't yet have parts for the new Speed/SpeedFit bindings.
2/10/2018
Answer from
Ionescu T
:S thanks for your answer!
Answer this question:
12/30/2017
Question from
Connor
I'm looking for the grey base plate that the Radical ST 2.0 toe piece sits on, picture here:
Hi Brendan, it does not. You still need the Radical Crampon Receptors if you don't have them already.
Answer this question:
5/30/2017
Question from
Champagne
I have a 2015 Dynafit Radical Speed binding with the antitwist plate and noticed that one of the plastic heel bases is cracked near a mounting screw. FYI, I swap the bindings regularly between skis and accidentally over torqued one of the screws. Could I replace the cracked heel base with the Speed Radical Heel Base?
Hey Champagne. Ouch, that's not fun. Yeah, in theory you could just swap the heel base, but there are a few different versions of it so you'll have to make sure you're getting the one that'll accept the anti-rotation plate. We don't have any in stock at the moment and likely won't be seeing them until the beginning of next season at the very earliest, but I'd be surprised if we see them at all.
Answer this question:
4/23/2017
Question from
Costin M
Hiya,
I am planning to remount my Radical FTs 1.0 but without the vibration damping system. I have read (on Wildsnow.com) that I can use the toe plate from the Radical ST 1.0. So two questions: have you tried this and if it worked do you have the toe plate in stock (and what price). Thanks!
Hi Costin, yes the toe pieces are the same so the baseplates are interchangeable. They are listed as Radical ST Toe Plates in the drop list.
Answer this question:
2/28/2017
Question from
Gabriel
Hi,
I've recently bought a pair of demo skis equipped with a Dynafit Radical St 2.0 with a rental toe plate adapter. I'm wondering what base plate would I need to buy to make it none demo.
I'm looking for a couple Radical ST Toe Plates to shim a set of Speed Radicals with a factory look. I don't see them listed in the drop down. Do you happen to have any lying around?
Hi Eric, the toe plates are sold individually without screws.
Answer this question:
1/6/2017
Question from
Mike
I have the Dynafit TLT toe pieces (5 bolt pattern). I'm looking for a shim for the toe. Is this equivalent to the TLT Speed Toe Plates that you have listed?
Hi Mike, the Speed Toe plates are the plastic that the metal wings sit on. They don't lift the binding further than stock, they are stock. For shims, check out the B&D ones.
Answer this question:
1/2/2017
Question from
MAVO
Hey J,
Will you guys be getting in anymore Radical ST Toeplates?
Hi Anders, we should have more early next week. Thanks.
Answer this question:
1/25/2016
Question from
Keatan
I have a broken toe plate on a pair of Dynafit Speed Turns that are last years model. Does the TLT Speed toe plate work with these or do I need a different product that is out of stock?
I want to add approx 3mm height to my 2015 TLT Speed Radical toe piece. 3 Questions on this: 1) Should I get the "Radical ST Toe Plate" or the "TLT Speed Toe Plate"? 2) What is the height of these options? 3) Do both options come with appropriate screws to account for the height...or should I order those separately?
Hi Troy, in this case you want the B&D shims (3.2mm classic) since the STs are over 6mm and the TLT Speeds won't fit. Screws are sold separately.
Answer this question:
11/2/2015
Question from
Simon
Do you have any Vertical ST heel plates ? Actually the heel plate of a Vertical FT ist broken, but I think that heel plate is the same as the Vertical ST.
Hi Simon, unfortunately not. Those have been out of circulation for a while now. Occasionally we come into some used ones, or you could trade in your working parts for credit towards new heels or a set.
Answer this question:
8/29/2015
Question from
MaVo
Will you guys be getting in new Dynafit Radical ST Toe Plates?
Hi MaVo, yes more are on the way, but we don't have a hard date yet. In the meantime, you can check out the B&D plates.
Answer this question:
4/21/2015
Question from
Preston Carlisle
Hello, I am looking for a baseplate for a dynafit Vertical FT 12 binding? Do you buy chance have any old spares laying around or no where I could find one? Salewa does not have them.
Hi Preston, unfortunately we are down to just toe plates for the Vertical FT. You can check our listing for used parts from time to time, or send us your working parts for some store credit towards a new binding.