Break a part or lose a set of springs? Don't be glum, we have a growing list of parts for Salomon and Atomic bindings. Details below.
MTN Women’s Heel Springs - The softest heel springs for the Salomon MTN or Atomic Backland binding. Sold as a pair.
MTN Men’s Heel Springs - Pair of the middle release-value springs for the MTN and Backland bindings.
MTN Expert Heel Springs - Set of the stiffest springs which control both lateral and vertical release on the MTN and Backland bindings. Experts only!
MTN Brake Mounting Screw - The screw and washer that's required to keep the MTN and Backland brake held onto the ski.
MTN / Backland Tour Toe & Heel Screw Set - A set of 4 screws for mounting a toe or heel from a Backland Tour or MTN Pure.
MTN / Backland Pure Heel Shims, 30mm x2 - Plastic plates that come standard under MTN / Backland Pure 30mm heel tracks, or for replacing the brake plate if converting to brakeless. Sold as a pair.
Shift Toe Lug Screw - The 5th screw and washer that's required to mount the Shift toe piece onto your ski.
Shift Rear Toe Holder Plus Screws - A pair of plastic holders plus screws for holding the rear of the toe piece down.
Shift Toe Screw - The two 10mm screws towards the back of the toe used to attach the MNC plate of the Shift binding.
Shift Heel Screw - The 16.5mm screws used to attach the heel of the Shift and the two screws in the middle of the toe of the Shift.
Shift Window x2 - Sold as a pair. These are the windows for generation 1 Shift bindings with a raised bump to help position the lock lever.
I'm looking for the (non-brake) heel plate for the MTN or Backland Pure... I have not been able to get this part even ordering through my local shop and i'm wondering whether you may have a line on it?
Hey Matt, right now we are in the process of getting some new heel plates in from Salomon. If you wanted to email help@skimo.co we can get that order set up for you.
Answer this question:
9/24/2020
Question from
kp2architects
I have broken the plastic part that holds the brake in place on my Salomon MTN binding heel piece. Is this a part that you can order for me?
If you send us a few photos to "help@skimo.co", we'll reach out to Salomon and see if they have any of that part available!
9/24/2020
Answer from
kenton p
Thanks for your prompt reply. I'll get some photos to you soon.
Answer this question:
5/8/2020
Question from
Eric Dahl
Do you carry or know of a way to get new heel pieces for the Backland/MTN bindings? Both of my heel units have developed significant play both vertically and horizontally.
Hey Eric, thanks for reaching out. We do not sell the Backland or MTN heel pieces separately, but I do suggest reaching out to the retail shop you purchased it from or the manufacturer directly to see if they can help you with a warranty. If you purchased the binding from us, email us at help@skimo.co and we can help you start the warranty process and see if it is something the manufacturer covers.
Answer this question:
4/24/2020
Question from
Shannon
Are the backland brake screw and shift toe lug screw the same?
Hey Shannon, they are not the same. Unfortunately we are currently out of the Shift Toe Lug Screw, but if you email us at help@skimo.co we can see about special ordering one for you!
Answer this question:
3/8/2020
Question from
Cameron
Do you sell the plastic crampon keeper clips to use Dynafit ski crampons with Salomon MTN bindings?
Hey Cameron, we have not historically stocked that as a separate widget, but shoot us an email at help@skimo.co and we can see if we can find a way to get you one!