Quiver Killers
These stainless steel inserts may actually expand your ski quiver instead of killing it. Properly installed in a ski, they allow you to mount bindings in a removable fashion. Thus, you can have a huge quiver of skis that all use the same binding. Of course, you could also use several bindings on one ski, which may help kill a ski quiver, but just creates a binding quiver. These should be called Quiver Enhancers instead.
To operate a set of QKs, you’ll need to buy one Stainless Insert for each screw hole in your binding. Then make several trips to the hardware store to find metric screws that fit your binding. Alternately, you could buy the pre-packaged fastener kits already known to work with your model (inserts not included). We currently stock kits for Dynafit Superlite, Turn, Radical, Vertical, Comfort, and Beast bindings. We also have kits for other brands include the Plum Guide, Fristchi Vipec, Marker Kingpin, and G3 ION bindings. Each kit comes with the quantity of screws needed to mount a pair of bindings (2 toes and 2 heels). We’re also happy to try and assemble a kit for your needs.
Also available is a Pro Installation Kit that consists of three items: (1) a specially machined drill bit that stops at the proper depth for an insert, (2) a tap to cut a thread into the ski that matches the outer pitch of the inserts, and (3) an installation tool that allows you to screw the inserts in and then back the tool out. You can also buy each item individually, listed as "Step Drill Bit, Bottom Tap, and Installation Tool".
Finally, you can use Vibra-Tite thread locker if you don't plan on swapping bindings often. The 5ml bottles will lock the fasteners into the inserts.
Questions & Reviews
5/6/2019
I'm hoping to use quiver killers with Hagan Ultra heels, but these would be mounted atop a riser plate, so I would need the screws to be longer. Are there options for longer screws, say somewhere between 5 mm and 10 mm longer than the quiver killer screws that you would normally use with the Hagan Ultra heel?
5/9/2019
Yann, We can figure it out for you. Tell us which riser plate you are using. Contact us at help@skimo.co
Answer this question:
3/17/2019
Is their a kit for the atomic shift binding?
3/23/2019
Hey CJ, we do not have any quiver killer kits for the Shift, my apologies.
Answer this question:
3/6/2019
I am trying to order some quiver killers today, but seems like it running out stock, when do you think will be available again in the future?
3/6/2019
Hi Liming, we get these in on a fairly regular basis. If you reply with your needs, we can tell what to expect. Thanks!
Answer this question:
2/9/2019
What quiver killer do I get for the Dynafit superlite 2.0 white?
2/12/2019
Hi Nick, we are currently out of stock of the Superlite white kits, they have specially ground heads to seat well in the Superlite feet. You could likely get standard M5 screws to fit with some modification.
Answer this question:
1/31/2019
which quiver killer set will work with BD helio bindings?
2/2/2019
Emily, We have it now. Look again BD Helio
Answer this question:
I was initially a big fan of QKs. Switching bindings around with a minimal weight penalty seemed like a great idea, and most importantly it allowed me to field a larger quiver for a similar cost.
I have been disappointed at how easily the screws work themselves loose as of late. Using the weakest of the three locktite strengths the screws still work themselves loose in tech toes pieces while skinning. Perhaps this is a matter of using a stronger locktite, but I'm wary of of this because the entire purpose is to remove and install the screws easily.
If you do end up installing quiver killers make sure to carry a leatherman, or some such capable of tightening the screws, on long days.
I have been disappointed at how easily the screws work themselves loose as of late. Using the weakest of the three locktite strengths the screws still work themselves loose in tech toes pieces while skinning. Perhaps this is a matter of using a stronger locktite, but I'm wary of of this because the entire purpose is to remove and install the screws easily.
If you do end up installing quiver killers make sure to carry a leatherman, or some such capable of tightening the screws, on long days.
Comment on this review:
Nice quality screws. Mine came as T25 heads for Dynafit Radicals. Just a heads up if you care about what kind of screw drive. (And a heads up cause most Dynafit screws are T20s.)
Comment on this review:
5/11/2018
if I am trying to install the quiver killers by myself, so only a set of pro installation kit needed to do the job?
5/11/2018
Hi liming, yes you will need the installation kit along with the inserts, fasteners, and something to hold the inserts in the ski such as epoxy.
Answer this question:
Given that we use lightweight gear in remote places, these are a no-brainer. Less likely to pull out than traditional screws, and easier to swap out a binding piece that is damaged. Buy a few extra to practice on with a 2x4. Definitely soak them in degreaser (then dry) before installing. And use epoxy rather than wood glue.
Comment on this review:
2/15/2018
Question from
Duncan 
What is all included in the Pro Installation Kit?
2/15/2018
Hey Duncan! Here's the text copied from the description: Pro Installation Kit that consists of three items: (1) a specially machined drill bit that stops at the proper depth for an insert, (2) a tap to cut a thread into the ski that matches the outer pitch of the inserts, and (3) an installation tool that allows you to screw the inserts in and then back the tool out. You can also buy each item individually, listed as "Step Drill Bit, Bottom Tap, and Installation Tool".
Answer this question:
1/11/2018
Will the inserts work well with the original screws shipped with Marker Griffon binding? Should I have to buy the screws with the inserts together?
1/12/2018
Hey Eric! Thanks for reaching out! Nope, the inserts take a machine thread and the screws that shipped with the Griffon should be wood screws. If you're looking to buy a kit then you'll definitely have to get the inserts, machine screws for the toes and heels (keep in mind those are pretty regularly two different sizes), and also an installation kit unless you're going to have a shop do it!
Answer this question:
11/23/2017
Hi. Which fastener kit would work with the new Dynafit Speed bindings? Thanks!
11/24/2017
Hi Elliot, we're putting together a kit for that binding but they are about a week out.
12/6/2017
Hi Elliot, we have these available now in the drop list.
Answer this question:
4/14/2017
How many Inserts come with the Stainless inserts for $1.95?
4/17/2017
Hi Tristan, that is the price per insert (quantity 1).
Answer this question:
3/22/2017
Is it possible to bore out a preexisting hole and put one of the qk's in?
3/22/2017
Hi Mat, if you mean a hole for a normal mounting screw, then yes.
Answer this question:
3/16/2017
I'd like to get a quiver killer package for the Kreuzspitze GT binding. Can you put that together for me?
3/16/2017
Hi Brent, it's available in the drop down as "Kreuzspitze Fastener Kit".
Answer this question:
3/9/2017
Is this fastern kit comes with all Phillis screws rather than Torx screws?
3/9/2017
Hi Lyman, they are Phillips by default, though we do have some sizes available as Torx. Let us know in the order comments if you'd prefer those.
Answer this question:
1/30/2017
Is it possible to compile a kit so I could inter change Dynafit Speed Turn bindings with Marker Duke Bindings? Also I would need just the Installation Tool.
Thanks!
Thanks!
2/1/2017
Hey Cali. Absolutely, though you may run into some hole pattern issues depending on if the ski has been mounted before. If you got the installation kit, a Speed Turn Fastener kit, and 34 inserts (for the Duke's 9 hole pattern) that should do it. Keep in mind, putting 17 large holes into each ski has a lot of potential to weaken it and isn't necessarily recommended, but as long as there is enough space between each insert this could be a very fun project. What ski is this going on?
Answer this question:
1/14/2017
Does a fastener kit come with the inserts, or does it consist only of screws? In other words, if I get a speed turn 2.0 fastener kit, do I also have to buy 7 inserts? thanks!
1/14/2017
Hi Jon, the fastener kits are just the fasteners that hold the binding in the inserts. You will also need an insert for each hole. For the Speed Turn 2.0, there are 16 total holes for which you may want inserts.
Answer this question:
12/8/2016
Do you know which fasteners is compatible with ATK Raider 12 2.0 bindings?
Thanks
Thanks
12/8/2016
Zdravo Željko, the 2.0 version uses the same fasteners as the 1.0 version. They are now listed as "ATK Raider" in the drop list.
Answer this question:
11/22/2016
If I still have my original screws from dynafit, will they match the threads of the insert? Also, will there be any height difference using QKs vs traditional binding mount?
11/22/2016
Hi Will, the mounting screws aren't compatible with the inserts. The inserts get embedded into the ski so the bindings sit flush per usual.
Answer this question:
Earn store credit by writing reviews. Learn more.
