Ski Trab Adjustment Plates

Have a Gara Titan or older TR-Race binding that won’t fit your new boots? Ski Trab adjustment plates are the solution. All plates are sold in pairs.

Race Heel Plate - A bolt-tension plate with 60mm rails. With these plates, a brakeless Ski Trab race (gara) heel will have around 25mm of adjustment range. Made with bomb-proof Ergal aluminum which weighs in at 29 grams (1.0 ounce) per side. Includes nuts, bolts, and mounting screws. Does NOT work with the Gara Titan Brake.

Race Heel Wide Plate - This adjustment plate has 60mm rails and a wide base of support that allows it to pair seamlessly with the Gara Titan Brake. Made with strong Ergal aluminum for a light and durable design that weighs in at 37 grams.

Titan Flex Vario - A flexible techno-polymer plate that doesn’t interfere with your ski flex! The Flex Vario plate allows for natural ski flex and has an integrated slider-bolt to make adjustments super quick. The track is also spring-loaded; as your ski flexes, the heel piece of the binding moves closer to your boot and if the ski flexes far enough, the heel fork can jam against your boot. The spring-loaded travel means the whole heel piece will slide back in this scenario so the release mechanism doesn’t bind. Works perfectly with the Gara Titan and Vario.1 (aka Titan Release) heels while being included with the Vario.2 bindings. This plate says "Ski Trab" on both sides and ships with hardware. The Vario plates have 24mm of adjustment and weigh 68g each, plus another 10g if you install the included toe shims that lessen the ramp angle change.

Vario Rental - Similar to the Titan Flex Vario, but a longer heel track. Useful if you want to accommodate a large BSL difference as these have 34mm of adjustment range. The single plate weighs 70g.