Kreuzspitze Binding Parts

Replacement parts and innovative accessories from Kreuzspitze. Find our growing collection of Kreuzspitze binding parts below, typically sold in pairs except for the screws/bolts/nuts.

Crampon Attachments, Race - The machined receptors that need to be mounted under the RS, RSA, SCTT, SCTTT toe pieces. Accepts standard tech binding crampons. 8 grams.

Crampon Attachments, Steel - These crampon receptors fit the EL and GT toe pieces.

Race Heel Risers - Plastic wedges that clamp onto the steel forks of RS-A & SCTT bindings. Rotate the heel piece 180 degrees to use. Not compatible with the titanium forks. 21g w/ bolt.

Steel Forks - Replacement forks for the RS-A and SCTT bindings, or turn an RS or SCTTT titanium version into a steel one.

Titanium Forks - Ti forks for the RS and SCTTT bindings, or shave about 9g off your steel RS-A or SCTT.

Lady Forks - Softer forks for lighter skiers that come stock on the RS Lady bindings.

Heel Support Pads - Support pads to take some weight off the heel pins of Kreuzspitze race bindings. Set comes with longer pan head screws and an adjusting bolt for height-tuning.

GT 2.0 Heel Covers - Integrated race flap plus high-riser (if you turn your binding 180 degrees) for the GT 2.0 and EL 2.0 bindings. Works as an upgrade for the original GT.

GT Heel Flaps - Race-style pin covers for quicker transitions using the GT binding. The flaps screw onto the heel roofs.

GT Heel Risers - Extra riser that sits on the GT Heel Flaps to offer a higher climbing position. Comes with long bolts to hold them onto the (required) flaps.

EL-R Roof and Riser - Replacement roof and riser for the EL-R binding.

Brake Mounts - Extra locking switches for the brakes so you can use them on more than one pair of skis.

Torx Mounting Screw - Standard ski screws for mounting Kreuzspitze toe and heel pieces (or adjustment plates).

Torx 16mm Mounting Screw - Longer mounting screw for adding shims and some tele parts.

Pan Head Mounting Screw - Pan head ski screws designed for the EL binding and also work for other bindings. 14mm thread length.

Pan Head 17mm Mounting Screw - Longer pan heads for adding shims and other creative uses.

Torx Adjustment Plate Bolt - Adjustment plate screws with Torx heads to resist stripping.

Torx Adjustment Plate Nut - Nuts that fit under the adjustment plates and accept the adjustment bolts.

Small Head Adjustment Bolts - M5 bolts with smaller milled heads that will seat cleanly into Dynafit binding feet, perfect for the Superlite 2.0/150 plates.