Salomon & Atomic Binding Parts
Break a part or lose a set of springs? Don't be glum, we have a growing list of parts for Salomon and Atomic bindings. Details below.
MTN Women’s Heel Springs - The softest heel springs for the Salomon MTN or Atomic Backland binding. Sold as a pair.
MTN Men’s Heel Springs - Pair of the middle release-value springs for the MTN and Backland bindings.
MTN Expert Heel Springs - Set of the stiffest springs which control both lateral and vertical release on the MTN and Backland bindings. Experts only!
MTN Brake Mounting Screw - The screw and washer that's required to keep the MTN and Backland brake held onto the ski.
MTN/Backland Tour Toe & Heel Screw Set - A set of 4 screws for mounting a toe or heel from a Backland Tour or MTN Pure.
Shift Toe Lug Screw - The 5th screw and washer that's required to mount the Shift toe piece onto your ski.
Shift Rear Toe Holder Plus Screws - A pair of plastic holders plus screws for holding the rear of the toe piece down.
Shift Toe Screw - The two 10mm screws towards the back of the toe used to attach the MNC plate of the Shift binding.
Shift Heel Screw - The 16.5mm screws used to attach the heel of the Shift and the two screws in the middle of the toe of the Shift.
Related Products
Questions & Reviews
10/29/2022
Good evening. I broke a little plastic "hook" that grabs the metal bar on the toe piece of my shift. The lever white to engage and disengage ski/walk on the toe piece will not lay flat now. Is this a part that you guys would happen to have on hand? Thanks in advance.
10/29/2022
Anthony, The only Shift parts available are screws, AFD plates and Brakes. There are no parts for the toe or heel pieces for sale. Any breakages of the binding itself would be a warranty situation.
11/12/2022
This just happened to me. Put in a warranty claim and got two replacement toe pieces. Just need one. Willing to sell the other for a fair price. Armada shift mnc 13.
11/13/2022
Hey, Zach. Shoot me an email at aaiello85@gmail.com. Thanks.
1/5/2023
Hey zach R di u still have the extra toe piece available ? Or if not what is the process of warranty claim .. shoot me an email at yasirrawa@gmail.com plz
2/10/2023
Hey Zach R, if you still have the extra toe piece to sell please contact me... connermmowery@gmail.com
Answer this question:
10/23/2022
I purchased a atomic bent chetler 120 2022 model ski with armanda shift MNC 13 bindings … the bindings were pre mounted on the runners … I purchased it in hot summer … later now whn the winter is about to arrive i was checking out my skis … I found a plastic part of my one ski binding at the toe is broken and is not there … that is a clamp like thing that slides to and fro … first of all i want to ask that will it create a problem later on … and is the replacement available for this .. i will share the image wth u … i will try to encircle it in red
10/24/2022
Thanks for reaching out, Yasir. If you want to reach out to us at help@skimo.co we can help you out!
2/17/2024
Hi,
I have the same problem...on both of my Armada Shift MNC 13 Bindings the clamps are broken...are there spare parts available? Or is it maybe only a cosmetic problem?
Thanks
Christoph
I have the same problem...on both of my Armada Shift MNC 13 Bindings the clamps are broken...are there spare parts available? Or is it maybe only a cosmetic problem?
Thanks
Christoph
10/12/2024
Is there any update on this? Did someone tried to manufacture the part out of metal?
Answer this question:
10/9/2022
Hey, I was wondering if it possible buy this piece or even the assembly for my shifts? Thank you
10/10/2022
Hi Ben,
While Skimo doesn't have those parts available right now, if you'd like to send us an email directly to help@skimo.co, and reattach that photo, we'll happily send out an inquiry on your behalf to see what might be available for you!
While Skimo doesn't have those parts available right now, if you'd like to send us an email directly to help@skimo.co, and reattach that photo, we'll happily send out an inquiry on your behalf to see what might be available for you!
11/18/2023
I need this part too. Does anybody know what it is even called? Is it available?
Answer this question:
6/17/2022
Can you get spare MTN toe pieces ?
6/17/2022
Tim, Sorry, Atomic/Salomon does not make those available to us. That being said, if your toe piece is broken or faulty, please send proof of purchase and a few photos to "help@skimo.co". From there, we may be able to help setup a warranty through the manufacturer.
Answer this question:
2/17/2022
Question from
Jeff Ilg 
Looking for the thru-bolt to bolt the frame to the toe mounting plate, for Salomon guardians. Often called Hex Drive Binding Barrels and Screws, but don’t know the length, diameter or screw head size.
Also three toe mounting screws for the same bindings. Not sure the length, they look short.
Also three toe mounting screws for the same bindings. Not sure the length, they look short.
2/17/2022
Hey Jeff!
Unfortunately, we do not sell the Guardian so we do not have a way to measure those bolts for you. Using a parts catalog to look this up I believe you would need a 12.2mm flat-head screw with an 8.8mm diameter head. Sorry I could not be more definitive!
Unfortunately, we do not sell the Guardian so we do not have a way to measure those bolts for you. Using a parts catalog to look this up I believe you would need a 12.2mm flat-head screw with an 8.8mm diameter head. Sorry I could not be more definitive!
Answer this question:
2/6/2022
Has anyone experience this issue.? The “ski” part of the ski/walk mechanism cracked in the middle. The piece still popped right back in but is fractured which is causing some play. Is this specific piece available or would that be a warranty issue?
2/6/2022
Also, do you sell shift “din windows” ?
2/9/2022
Same thing just happened to me today. Anyone sell replacements for that part?
5/23/2022
Thanks for reaching out, Joey. It doesn't appear the "ski tab" is sold as a replacement part, however, the DIN window is. Please send us an email to help@skimo.co and we can help you out!
Answer this question:
1/31/2022
Hi guys, do you sell screws for the Shift toe piece?
2/1/2022
Hi Stephen, we sure do! They are called 'Shift Toe Screw x 1' in the dropdown menu above.
Answer this question:
1/24/2022
Hi! I just purchased the shift bindings but during installation somehow managed to lose this yellow plastic piece that holds the spring in. Do you possibly have a replacement I could buy? Or do you know how I might replace it some other way? Thanks so much for your help!
1/26/2022
Thanks for your question, Tanush. We don't sell this part, and it doesn't look like it's listed in their spare parts catalog. Your best bet will be to reach out to Salomon directly.
Answer this question:
1/21/2022
Hello!
I just broke my brand new Shift Binding Toe Piece, I was wondering if it's changeable and if so, do you have it?
I just broke my brand new Shift Binding Toe Piece, I was wondering if it's changeable and if so, do you have it?
1/21/2022
We're sorry to see this, Bardhosh! The good news is, you absolutely can replace the toe piece, however, we don't offer it for sale individually, sorry about that. Depending on the circumstances of the break, you should be able to submit a warranty with Salomon! If you purchased the binding with us, please reach out at help@skimo.co and we can help you with the warranty process. Please let us know if you have any other questions!
Answer this question:
1/17/2022
Do you sell this screw (circled in red, see picture) for the Solomon MTN/Backland binding?
1/17/2022
Josh,
Thanks for reaching out! We do not sell that particular part on its own, but we do sell the spring sets which can be found in the drop down menu on this page. You may have luck finding the same screw size and threadcount at a hardware store. Sorry I couldn't be of more help on this one!
Thanks for reaching out! We do not sell that particular part on its own, but we do sell the spring sets which can be found in the drop down menu on this page. You may have luck finding the same screw size and threadcount at a hardware store. Sorry I couldn't be of more help on this one!
Answer this question:
1/13/2022
Do you guys sell the heel base plates along with the screws for the Salomon shifts?
1/14/2022
Thanks for reaching out, Skyler. At this point, we unfortunately aren't, sorry about that! Please let us know if you have any other questions.
Answer this question:
1/7/2022
I damaged an overtorqued AFD plate screw on these Atomic X12 bindings. Can I get just the screw or do I need to buy a new plate? thx!
1/7/2022
Rob,
Sorry to hear about the issue! Eyeballing the situation I'm not sure if we have what you need, but if you can possibly remove the undamaged screw and send a picture and measurements over to help@skimo.co we may be able to help!
Sorry to hear about the issue! Eyeballing the situation I'm not sure if we have what you need, but if you can possibly remove the undamaged screw and send a picture and measurements over to help@skimo.co we may be able to help!
Answer this question:
1/4/2022
OMG, your website is a godsend! I have a pair of 2022 Shift 13s. Do you have the clear plastic cap that goes over the toe din?
1/4/2022
Thanks for reaching out, Matthew. We don't offer them for sale, however, we'd be happy to replace one on your binding if you come into the shop!
1/5/2022
Thank you for your answer and timely response. Unfortunately, I'm in Maine and not local. Wish I had a local shop half as helpful as yours.
If you're able to ship at all, please let me know.
Matt
If you're able to ship at all, please let me know.
Matt
1/5/2022
Hey Matthew, send us a message at help@skimo.co and we'll see what we can do!
Answer this question:
12/29/2021
Hi, any chance you have the metal piece on the Shift bindings that hold the ski crampon?
12/30/2021
Thanks for reaching out, Jimmy, We don't have that specific metal piece, however, it should be included with the "Shift Toe AFD Plate," available from the dropdown menu above. Please let us know if you have any other questions.
12/30/2021
sounds great! I only lost one metal piece, Is it OK to only buy one of them at half price? much appreciated!
12/31/2021
They're typically sold as a set, sorry about that!
Answer this question:
12/29/2021
Atomic 412 parts. Are these beta 10.20 skis worthless or can I come up with a binding that will fit the raised track? Thanks, Dennis
12/29/2021
Hi Dennis,
The Atomic Beta 10.20 is a heavy resort ski. It will take its toll on the skin track. If you have the funds available, it will be well worth the money to invest in a lighter ski for the backcountry. For ski options, or other questions, reach out to help@skimo.co!
The Atomic Beta 10.20 is a heavy resort ski. It will take its toll on the skin track. If you have the funds available, it will be well worth the money to invest in a lighter ski for the backcountry. For ski options, or other questions, reach out to help@skimo.co!
Answer this question:
4/7/2021
I am trying to see which screws set do I need for the s/lab shift mnc 10?
Thnaks,
Thnaks,
4/7/2021
Hi Tin,
Unfortunatley, the shift uses proprietary mounting screws. Each toe mounts with a Shift Toe Lug Screw, two 16.5 mm flat headed screws (which we unfortunately don't carry) and two 12.75mm flatheads that are included with the Shift Rear Toe Holder with Screws. Each heel mounts with the 4 screws included in the Shift Heel Screw Set, which are 17mm flatheads.
If we don't have some screws that you need, shoot us an email at help@skimo.co and we can see about getting some in or working out an alternate solution.
Unfortunatley, the shift uses proprietary mounting screws. Each toe mounts with a Shift Toe Lug Screw, two 16.5 mm flat headed screws (which we unfortunately don't carry) and two 12.75mm flatheads that are included with the Shift Rear Toe Holder with Screws. Each heel mounts with the 4 screws included in the Shift Heel Screw Set, which are 17mm flatheads.
If we don't have some screws that you need, shoot us an email at help@skimo.co and we can see about getting some in or working out an alternate solution.
Answer this question:
2/15/2021
Hi
have anyone an idea for the problem of loose heel lifters? the middle setting getting very loose and every step they are not in place and flapping around.
have somebody an idea?
thank you markus
have anyone an idea for the problem of loose heel lifters? the middle setting getting very loose and every step they are not in place and flapping around.
have somebody an idea?
thank you markus
2/16/2021
Thanks for your question, Markus! It sounds like the heel risers are worn down where they contact the tapered pin, resulting in them being a bit loose. There isn't currently a fix for this, however, if you tap the pin out you may be able to take up space and snug up the interface. Please let us know if there is anything else we can do for you.
3/6/2021
Markus,
I had this issue on my MTNs. A couple drops of green Vibratite helped snug them up nicely. Apply, wipe away the extra, and let it cure. They were extra tight after that. Flip them over back several dozen times to break them in and they seem as good as new now.
I had this issue on my MTNs. A couple drops of green Vibratite helped snug them up nicely. Apply, wipe away the extra, and let it cure. They were extra tight after that. Flip them over back several dozen times to break them in and they seem as good as new now.
Answer this question:
2/10/2021
Hi, I wonder do you have Shift's heel plate/track for sale? Thanks
2/10/2021
Hey Jimmy,
Reach out to help@skimo.co and we'll see if we can help you out!
Reach out to help@skimo.co and we'll see if we can help you out!
Answer this question:
1/19/2021
Salomon has issued a new DIN window on the Shift binding to keep the toe lever locked while skinning. Apparently, the part number is L41636600+ (in Europe). Apparently, one can do this fix at home. The DIN window has "bumps" on either side of the window to help keep the toe lever elevated. Can you get these?
1/19/2021
Hi Bob,
Reach out to us at help@skimo.co with a photo or video of your binding, and we would be happy to look into it for you!
Reach out to us at help@skimo.co with a photo or video of your binding, and we would be happy to look into it for you!
Answer this question:
1/16/2021
Hello,
I am looking for the Salomon Mtn brakeless baseplate. Do you guys have/carry the brakeless baseplates?
Thanks!
I am looking for the Salomon Mtn brakeless baseplate. Do you guys have/carry the brakeless baseplates?
Thanks!
1/18/2021
Thanks for your question, Findlay! It doesn't appear that we do, however, please send us an email at help@skimo.co and we would love to check if we can get it in for you!
Answer this question:
Earn store credit by writing reviews. Learn more.
