This is where to find Dynafit boot parts. A few odds and ends that we don't want to throw away in case you need them.
Blacklight Cuff Rivet - Inserts and washers to replace both pivot points for the Blacklight boot. Slightly longer than the TLT X cuff rivet.
DNA/Mezzalama Cuff Buckle Set - Replacement cuff buckle sets for the DNA and Mezzalama boots. Sold per set.
DNA/Mezzalama Cuff Pivot - Cuff pivot assembly replacement sold as an individual pivot.
DNA/Mezzalama Race1 Rotor Set - Dynafit's proprietary cable-and-dial closure system that is used on the DNA and Mezzalama boot.
DNA/Mezzalama Ski/Walk Mechanism - Replacement Ski Walk lever for the DNA and Mezzalama boots. Sold individually.
DNA/Mezzalama Ski/Walk Cable - Cord that connects the cuff and ski/walk lever, allowing the lever to tighten the cuff. Sold as a pair
DNA/Mezzalama Ski/Walk Mechanism - Ski/walk lever including attachment hardware and the catch for the lower. Includes hardware for one boot.
Hoji Cuff Pivot - Inserts and washers to replace both pivot points for the cuff of any Hoji boot.
Hoji Ski/Walk Mechanism - Full ski/walk assembly for the Hoji Pro Tour and Free 110 / 130 boots.
Tigard Boot Boards - Replacements for broken boot boards that go under the liner in the Tigard. If you've got a full-size, round up to the nearest half-size. Sold in pairs.
Titan/Zeus/Gaia Soles - Replacement touring soles for Titan/Gaia/ZZeus boots. Not alpine soles.
TLT X/Blacklight Gaiter - New gaiter to replace worn-out gaiters on your TLT X or Blacklight Boots. If you've got a full-size, round up to the nearest half-size. Sold individually.
TLT X/Blacklight Twistfit Set - Everything you need to fix a broken cable or dial on the TLT X or Blacklight boot.
TLT X/Low Tech Cuff Rivets - Inserts and washers to replace both pivot points for the TLT X or Low Tech boot. Not for the Blacklight boot.
ZZero 4 Ski/Walk Mechanism - Switches boot from ski to walk mode.
Unfortunately we do not have more coming into stock. However, you may be able to get a warranty replacement if yours are worn out! You just need to have proof of original purchase. Feel free to email us at warranty@skimo.co if you want to start this process.
Answer this question:
4/8/2024
Question from
Sebastian
Please could you tell me the name of the orange/red looking cables in the "Hoji Ski/Walk Mechanism - Full ski/walk assembly" ?
My bootfitter shortened these on a Dynafit Radical Pro to get a tighter fit, but now the cuff is too tight to close. Looking to start over but since all I actually need is those cables I was hoping to avoid having to buy the whole assembly. Thanks!
4/8/2024
Answer from
Gabriel I
Hi Sebastian, no such luck unfortunately, they are not available separately. No specific part name for it, sorry!
Answer this question:
12/10/2023
Question from
Ben
The connecting hinge/fastener on the tongue of my TLT7 (carbonio) snapped and I’m looking to replace it. Do you have this metal piece that connects the tongue to the shell? Sorry if I’m missing it somewhere!
Ben, Sorry we do not have that part seems like all of the ones we have replaced people had to get from Dynafit direct.
Answer this question:
2/27/2022
Question from
Jen McGuinness
Hi there, can you please provide diameters of the cuff pivots you have? Looking to replace the pivot of a Zzero and wondering if either the DNA or Hoji might be the same diameter as the Zzero. Thanks :)
Hello Jen. I'm sorry but we no longer carry parts for that boot. You may have some luck sourcing parts from your local hardware store.
Answer this question:
1/13/2022
Question from
Edward Steele
I am desperately trying to find a replacement top buckle for a Vulkan boot. I can't believe that Dynafit has stopped servicing this entire line of boot. Please help! I have been buying Dynafit equipment for years.
Happy to brainstorm solutions with you. Send us a photo of the intact buckle on one boot, as well as the broken buckle and catch on the other boot to help@skimo.co!
Answer this question:
12/3/2019
Question from
Brendan
Hey I have old Dynafit Titan. Not sure the year maybe 2013 (mainly white boot with red and black), I bought them used and beat up. Trying to find new footplate sole things :) and new buckles to replace. Are these green soles specific to boot size?
Brendan, yes they are size specific, 25. We have some Dynafit buckles, but not for the Titan. They look like standard Alpine ski boot buckles, maybe you can find some at a ski shop.
Answer this question:
3/23/2019
Question from
Steve
I see you have titan/ zzeus touring soles for a size 25 boot- will they fit my size 28 zzeus? And does 2 mean 1 toe and heel for one boot or toes and heel blocks for a pair of boots?
Love the availability you guys have of spare parts... nothing is quite as serviceable as a Dynafit boot when you can easily get the parts. Be sure to bring a few extra buckles on expedition, or plenty of spare Voile straps :)
Comment on this review:
11/29/2018
Question from
david
do you sell replacement alpine soles for Titan/Gaia/ZZeus boot?
Hey Dan! Tough to say for sure but I'd say it's almost definitely compatible! Plus, we have a pretty generous return policy so I'd say the $19.95 is a small price to pay to revamp some boots! If it doesn't work you're welcome to send it back within 30 days unless you mounted it on the boot!
Answer this question:
12/3/2017
Question from
Jay
Hi- I got a pair of TLT6's from you guys a couple years ago but only skied them a few times. After a couple of injured seasons I plan to ski way more this year. Question: Is the cant adjustable on the TLT6? I am also interested in some size 30 soft tongues. Did you already sell out of those for the season? Thanks!
Hi Ben, if you had an entire cuff you could! Unfortunately that part isn't available.
Answer this question:
2/10/2017
Question from
Laura
Hello, Here is the question. I need to change boty CHIMNEYS of the boot PDG White &Black (which u have on the pic), it moves on ski mode. It seems like a no.10. Is there a chance you will have it? Thanks for your reply. Laura
I am looking for the tapered screws that go into the heel plate of pretty much all boots. I need a couple to keep in stock. We have screws that are the right thread, but not tapered enough and therefore stick out past flush.
Hi Dave, the rivets require a press to install, which Dynafit can handle if you mail your boots to Boulder. Alternately, you can use an aftermarket rivet system from B&D explained in detail here.
Answer this question:
9/28/2015
Question from
Phil
Do you have any Titan parts? I'm looking for a replacement set of AT heel/toe bottom pads.
Hi Phil, unfortunately we didn't carry the Titan or it's parts, and it looks like Dynafit doesn't have a lot available. I would give them a shout to see if they can dig anything up from warranty.
