Wear out your instep cable? Break a buckle on your Backlands? Check out our offerings of Atomic replacement parts for your boots. Items in these listings are sold individually as single parts unless listed otherwise.
Backland Frictionless Pivot - Keeps the cuff rotating around and attached to the lower shell. Sold individually, two would repair one boot, 4 would repair a full set of boots.
Backland Cuff Buckle - Upper buckle on the cuff (for all Backland boots except for the Ultimate)
Backland Shell Buckle - Lower shell buckle to hold your foot in place (for all Backland boots)
Backland Shell Cable - Lower shell cable to work in conjunction with Shell Buckle. Comes in different sizes for your boot. (for all Backland boots)
Hawx XTD / Pre 19/20 Backland Ski/Walk Mechanism - Lock 2.0 mechanism located on the rear spine of the boot. Sold individually. (for all XTD and Pre 2019/20 Backland boots except for the Ultimate)
Backland Carbon Cable Guide - Inside of the foot guide for lower cable. (for all Backland boots)
Backland Carbon Cuff Buckle Catch - The curved plate with teeth to catch the cuff buckle. (for all Backland boots)
Backland Ultimate Cord and Strap Loop - Dyneema cord for the cuff including the metal strap loop. (only for Ultimate)
Hawx Ultra XTD Buckle Shell - Lower buckle on the lower shell used in either position
Hawx Ultra XTD Buckle Cuff - Upper cuff buckle for either position
Hawx Ultra XTD Shell Catch Small - Lower shell toe catch
Do you all carry the XTD Free/Lock Base Plate 13/19", part number AZE001416? This should allow my Hawx 120 Ultra XTD to be change from 15/17 degree forward lean to 13/19 degree.
Thanks for reaching out, Tyler! This is available as "XTD Free/Lock Base Plate 13/19" from the drop down menu above. Please let us know if you have any other questions!
Answer this question:
7/20/2021
Question from
Nik
Good day!
Will you be receiving any additional stock of the Hawx XTD Buckle - Toe, left and right position?
Hey Steve, we don't have any at the moment, but I've set up an alert so you'll get an email when it's back in stock!
Answer this question:
3/25/2021
Question from
Blair
Could you identify what item pertains to the picture of the bracket with 2 screws with inprints 15 and 17. My screw broke off inside this bracket on the HAWX Ultra XTD 130 26.5 and i need a new backing bracket for this.
In the drop down menu to actually buy the parts, it lists a “Hawx Cuff buckle Left”, and an “Hawx Instep Buckle Right”. Is one of those a typo perhaps? And, do I understand you that these Hawx buckles are the first gen, with the extension on the ladder, not the second gen, with the clip over the ladder and the slider in the buckle? Thanks!
Hello Tjaard, I don't see anything wrong with the first two items. We are out of the right cuff and Left instep buckles. The Hawx Cuff catch is the one with the extension. Do not have he one with a clip.
Is the Atomic Hawx Ultra XTD replacement Cuff Catch (aka buckle ladder) the newer-style catch with the touring clip that keeps the buckle from flopping around when unbuckled? Similar to the Backland style catch?
Would like to replace the buckle catches on my first-gen Hawx XTD 120.
Hey Daniel, the replacement cuff catch we carry is going to be that older model without the touring clip, so it should work just fine for your first-gen Hawx XTDs!
Answer this question:
2/14/2021
Question from
Chuck Wagenheim
The Allen wrench screw that holds the rear lockdown catch on my Hawk XTD ultra 130 boots is missing can I get another one.I would also like to get extra screws for the top catch buckles on the same boot
Thanks for your question, Chuck! We don't have any of those particular bolts in stock, however, please send us an email to help@skimo.co and we would love to check to see if we can get them in! A quick solution also would be to go to your local hardware store to see if they have anything that will fit. Please reach out if you have any other questions!
Answer this question:
1/31/2021
Question from
Connor
Will you have any more of the long cables in soon? I tried ordering two but it said there was only 1 left in stock.
Connor- Parts are getting hard to get this season. With that said we may be getting some more. My suggestion is to purchase the 1 we have and watch this page for some more.
Ordered a shorter front cable to tighten up the fit of my backland boot a little. Basically ordered the one for the next size down and now I actually have some adjustment vs it just being as tight as I can get them. Worked out beautifully.
Hey Noah, unsure which particular part you're looking at, but probably not. Atomic's buckle designs for their alpine boots are different than for their touring boots.
I have a pair of 2019 Backland Ultimates. I'd like to remove the upper cuff cable to add a traditional cuff buckle like seen on other Backland models. Can you advise me on which parts I need to customize my boots? thanks!
Hey Patrick, since there is not spot to mount the buckle catch you would need to drill a spot for them. Otherwise you would need two Backland Cuff buckle and two Backland Carbon Cuff Buckle Catch.
Answer this question:
9/4/2020
Question from
Michael
I need new bushings/pivots for my atomic backland carbons. They are the previous model year without the boa closure. Are the ones you have for sale compatible with the model of boots i have or are they for the current boa atomic Backlands?
Michael, Atomic did us all a favor and use the same pivots throughout the Backland boots, past and present. They are exact replacements.
Answer this question:
4/12/2020
Question from
John Verzuh
Can I order some extra screws for my Atomic Hawk Ultra 130 boot? I need the screw that holds the Backland Ski/Walk mechanism- Lock mechanism to the boot. The boot was purchased in the 2017/2018 season. OR do you have the entire Backland Ski/Walk mechanism- Lock 2.0?
Hi, Similar to the post from Marie R on 12/8/17, I have lost the shell buckle wire clip on my Backlands. I see this shell buckle listed but it appears to be out of stock. Any chance you will have it back in stock? The lack of clip is making the buckles even more fiddley...
Unfortunately we are not expecting any more shell buckles for the rest of the season. If you want to email us at help@skimo.co we can set up a notification for you in the case that we are able to get more buckles.
Patrick // Skimo Co
Answer this question:
2/11/2020
Question from
Dan
Any idea on when you'll have the Backland Shell Buckle back in stock?
Hi Dan, unfortunately stock is looking thin for the rest of the season. We'll be trying to get more, but I don't have high hops.
Answer this question:
4/4/2019
Question from
Matt
Hi there, I broke the second buckle from the top on my Hawx Ultra XTD 130s. I don't see the right-side cuff buckle listed online—is that the same as the Hawx Ultra XTD shell buckle, or are they different parts? I see someone mentioned the Hawx Ultra XTD cuff buckles/catches previously, so I was just checking on it to see if maybe it's out of stock or you can source it. Thanks!
Matt, The cuff and shell buckles are different. We are out now. Please email us with your info and we can add to list for future order.
Answer this question:
4/4/2019
Question from
Jared
Do the Hawx XTD buckle catches come with the metal piece for walk-mode? Does the XTD buckle shell contain all of the other pieces (the other side of the buckle system)?
Jordan, We are out of the buckle, but the 25-27 ( also 27.5) cable will work. We will try to order more buckles.
Answer this question:
2/26/2019
Question from
Chris
Love my 120 limey/yellow Hawks! (Maybe 2016?) i am searching for new front and back toe and heel pieces for both boots. I teach in these and love the custom fit with my new Intuition liners. Very loyal to your Atomic brand, along with my Vantage Ti 80s and Vantage Ti 90s skis. My boot is a 26.5 Thanks
Chris, Do those have replaceable heels and toes? We do not have those.
Answer this question:
2/21/2019
Question from
Douglas
I'm looking for an Atomic Backland Carbon buckle replacement like the one shown in the photo. Is this exact same one you are carrying in your stock? Is this the Backland Shell buckle? Thank you
