Hello,
I'm looking for help. Is there any chance I can have Crampons on this bindings ? What should I buy ? I don't see a way to attach crampons to this binding.
Thank you for your help
Cheers
Alex
Dynafit Crampon Receptors
Lost or broke your receptors? No problem, we got them. These receptors are sold individually and accept all Dynafit crampons.
LTR / Superlite Crampon Clip - The little bit of metal that ski crampons slide into plus the tiny screws to secure it. Works with Low Tech Race 1.0, 2.0, and the original Superlite series (Speed, 2.0, 175). These are NOT compatible with the Low Tech Race 105, 115 and Superlite 150 bindings.
Speed Turn 2.0 Crampon Receptor - For the 4 hole Speed Turn toe pieces.
Radical Crampon Receptor - The attachment that screws onto the toe pieces of all Radical 1.0 series bindings, including the ST, FT, and Speed Radical.
LTR 105 / Superlite 150 Crampon Receptor - Crampon receptor for new LTR 105, 115 and Superlite 150 toe piece.
» Browse more
Dynafit Binding Parts
Questions & Reviews
3/6/2024
3/7/2024
Hi Alex, for that you'll want the "LTR 105/Superlite 150" receptor. To install it, you have to take the toe off of the ski to slot the receptor under the bar between the rear two holes.
3/7/2024
Hi Will,
Thank you so much for the feedback and information, it will help me a lots !
Cheers
Alex
Thank you so much for the feedback and information, it will help me a lots !
Cheers
Alex
Answer this question:
1/24/2024
can you confirm the LTR 105 / Superlite 150 Crampon Receptor will work to replace this piece?
Thank you!!
Thank you!!
1/24/2024
Hi Francois! Based on the photo, the LTR 105 / Superlite 150 crampon receptor is the part for you! They are compatible with new LTR 105, 115 and Superlite 150 bindings so if one of those are you, you are good to go. Thanks!
Answer this question:
10/23/2023
I got some atk ski crampons that should work with these bindings but I only have the bottom clip, no top clip to keep them in. Got an older version of the superlites.
10/23/2023
Oops Greg, that crampon receptor is screwed into the wrong place. Unscrew, slide it under the binding, re-screw, and it will hold your crampons just fine.
Answer this question:
9/14/2022
I want to add crampon receptors to a pair of Dynafit binding. I don't know what model. The receptors I have are ~18mm from the mounting holes to the center of the crampon mounting bar. The bindings on the ski the bar would be ~8mm back from the mounting screws. Do you have clips that short?
9/14/2022
Hello Dave, it looks like a Speed Turn 2.0 toe piece. You will want the Speed Turn 2.0 crampon receptor. They do not come as pairs so make sure you add two to the cart. If you need help installing them feel free to reach out to help@skimo.co.
Answer this question:
8/19/2022
Hey there,
Got a pair of skis and trying to prepare them for the coming season. I am missing the crampon receptor on one of the bindings and I am wondering if this is the correct missing part. I attach the side that has the receptor for reference.
If this is not the correct part, would you be me able to tell me which one it is and if you have it.
Thanks!
Got a pair of skis and trying to prepare them for the coming season. I am missing the crampon receptor on one of the bindings and I am wondering if this is the correct missing part. I attach the side that has the receptor for reference.
If this is not the correct part, would you be me able to tell me which one it is and if you have it.
Thanks!
8/20/2022
Hey Alex, the Radical 1.0 Crampon Receptor x1 should be the one you are looking for. Thanks
Answer this question:
4/3/2022
Which of these would fit the Superlite , original green bindings?
4/4/2022
Thanks for reaching out, Guy. You will need the "LTR / Superlite Crampon Clip" in the drop-down menu above.
Answer this question:
12/22/2021
Hello! I have the Dynafit superlite 150 bindings. The crampon attachment piece has sheared off and I want a different crampon attachment that is bolted in (like the LTR / Superlite Crampon Clip). Is there anything else that works with Dynafit superlite 150 bindings?
12/22/2021
Hi Liz, thank you for the question! The Plum universal crampon receptor should do the trick. They mount directly to the ski so work with any binding! They can be found on our Plum Binding Parts page.
Answer this question:
12/11/2020
Looks like I need to be more specific. There are three different crampon receptors here, will one of the three work on Low Tech Race 105 bindings? If so which one?
12/12/2020
Hey Jerry!
If you send us your shipping address & a note to help@skimo.co we'll see if we can special order it for you!
If you send us your shipping address & a note to help@skimo.co we'll see if we can special order it for you!
Answer this question:
2/13/2020
I recently got some bindings but I’m not sure what they are and how to use ski crampons with them. I think they are the classic tlt speed .
2/14/2020
Hey Ben, thanks for reaching out! You'll need to replace the toe baseplate and it will have a crampon receptor built into the plastic, there is not a separate metal crampon receptor for this binding. Best of luck!
Answer this question:
10/16/2019
What is the weight of these crampon clips?
Specifically interested in the one that fits speed radical, but wondering about all 3 types.
Thank you.
Specifically interested in the one that fits speed radical, but wondering about all 3 types.
Thank you.
10/16/2019
LTR/superlight x1 4g
Speed Turn pair - 14g
Speed Radical pair - 14g
Speed Turn pair - 14g
Speed Radical pair - 14g
Answer this question:
4/22/2019
Hi, I am looking for a Dynafit Beast 16 crampon metal clip that goes under the toe portion of the binding, I lost one and I have one.
thanks!
thanks!
4/22/2019
Bruce, We haven't ever stocked that.
Answer this question:
9/22/2018
Sorry about the double post, I only just realised how to attach a pic - please see below for the part I am trying to replace. Many thanks!
9/22/2018
Hi Anthony, please see my response to your post below.
9/23/2018
Many thanks for your prompt response Nate, will place an order shortly!
Answer this question:
9/22/2018
Hi guys, I'm just after the crampon holder for the Dynafit Speed Turn 2.0. I'm a bit confused because I notice a post on 2/12/18 (also from an Anthony!) with a similar question, but his has a 4 bolt pattern, whereas mine has a 2 bolt pattern. If you could confirm that would be fantastic. I can send pics to confirm if necessary.
9/22/2018
Hi Anthony, I believe the prior post was referring to the number of mounting holes for the toe piece, and not the crampon receptor. The piece you are looking for is listed above as Speed Turn 2.0 Crampon Receptor.
Answer this question:
3/26/2018
Question from
Sam Hansen 
Looking for 2 crampon clips to go with the set of Radical ST/FT toe Pieces I ordered from Skimo a week ago. Do you guys have any of these? I couldn't find them on the site...
Thanks,
Thanks,
3/26/2018
Hi Sam, looks like you found them. They are listed as Radical Crampon Receptors.
Answer this question:
3/7/2018
Will the speed turn crampon receptors work for the Superlite 2.0 crampon receptors? I need the receptor and the screws both. Thanks.
3/7/2018
Hi Adam, the Speed Turn Crampon receptors won't work with the Superlite 2.0 toes. The crampon receptor you seek for those toes is the LTR/Superlite crampon clip listed above.
Answer this question:
2/12/2018
I am looking for the crampon receptor for the Speed Turn 2.0 with 4 bolt pattern. The crampon receptor is different than the one for the radical series it seems. Do you sell those separately?
2/14/2018
Hi Anthony, we do! They are listed above as "Speed Turn 2.0 Crampon Receptor", sold individually.
Answer this question:
2/22/2017
Hi Jason and Crew,
Does or did Dynafit make a metal crampon attachment clip for the Speed Turn 1.0 (5-hole toes)? The plastic ones look so flimsy and I would like to replace it.
Does or did Dynafit make a metal crampon attachment clip for the Speed Turn 1.0 (5-hole toes)? The plastic ones look so flimsy and I would like to replace it.
2/22/2017
Hi Richard, unfortunately not. There is only the one option.
Answer this question:
1/23/2017
I forgot to include the crampon receptors when I mounted a pair of radical ST toes. Is there any reason I shouldnt ski these without the receptors? Thanks!
1/23/2017
Hey Misha, you should be fine, I wouldn't worry. The crampon receptor only helps the rear (closest to the tail) toe piece screws sit flush with the top sheet, but if you are worried about structural integrity things are A-Ok!
Answer this question:
10/23/2016
Hi there,
Do you have the crampon receptor for Beast 16's? It's a thin piece of middle with two hooks on the end that sits outside the toe piece, and it mounts to the toe piece thru two screws. Thanks!
Thomas
Do you have the crampon receptor for Beast 16's? It's a thin piece of middle with two hooks on the end that sits outside the toe piece, and it mounts to the toe piece thru two screws. Thanks!
Thomas
10/24/2016
Hi Thomas, unfortunately that is not available as a separate part.
Answer this question:
12/16/2014
Any plans to offer race toe crampon receptors?
12/16/2014
Hi TZed, Dynafit doesn't offer those as a separate part, but we might be able to scrounge something up in a pinch. Note also that the Plum crampon attachments fit in the Dynafit slots reasonably well.
12/16/2014
Thanks for the info, I'm looking something more reasonably priced than the Plum versions. Unfortunate that Dynafit doesn't offer them as a separate part. If you ever came into a pair for a reasonable price I would be interested. Cheers
Answer this question:
Earn store credit by writing reviews. Learn more.
