SCARPA Hardware

Find replacement hardware for SCARPA boots here. All parts sold as individuals unless noted otherwise.

Alien 1.0 Cuff Bushing - The bushing that helps your boot walk and is probably worn out if you’re looking for it.

Alien 1.0 Knurled Cuff Spacer - A ridged spacer used in the cuff pivot of the Alien 1.0 (old model).

Alien 1.0 Outside Cuff Washer - The outermost washer on your Alien 1.0 (old model) that helps keep the bolt tight while retaining walking ability.

Alien 1.0 Cuff Nut - The hexagonal threaded cuff nut that works in conjunction with the outside cuff washer and cuff screw to assemble the cuff pivot.

Alien Cuff Nut - The threaded cuff nut that works in conjunction with the outside cuff washer and cuff screw to assemble the cuff pivot.

Alien Cuff Screw - The screw that holds the Alien cuff pivot together.

Alien Outside Cuff Washer - The outside cuff washer for the first-generation Alien.

Alien Powerstrap Holder - The little clip that attaches onto the cuff of the Alien. Easy to lose but even easier to replace.

Short Rivet - Short rivest for buckels and eyelets for the Alien 1.0 and 3.0

Alien RS Rivet Long - The rivet used to affix cable guides and the leash ring to the cuff of the Alien RS.

Alien Tongue Screw - The small torx screw that attaches the tongue and Boa assembly to the shell of the boot.

AT Boots Catch Screw - The screw that bolts your ski/walk lever or buckle catch to your cuff or lower shell.

F1 Inside Cuff Nut - The nut that goes on the inside of the cuff pivot to help keep everything tensioned appropriately.

F1 Outside Cuff Washer - The external cuff washer that keeps your boots walking freely and looking pretty on an F1 or the outside lateral cuff pivot of a Maestrale or Gea 2.0/3.0.

F1/F1 LT Buckle Rivet - The rivet that attaches the cuff buckle to the cuff of F1-series boots.

F1/Maestrale/Gea Tongue Screw - The screw that attaches the tongue of the F1/Maestrale/Gea to the lower shell.

F1 Cuff Pivot/Freedom Buckle Ladder Screw - The screw that secures the cuff pivot on the F1 and F1 LT. Used as the outside lateral cuff screw on Maestrale or Gea 2.0/3.0 boots. Also attaches the ladder to the Freedom series boots.

Maestrale/Gea RS 2.0 Ski/Walk Mech Screw - The screw holding the Ski-Walk mechanism onto your Maestrale or Gea RS 2.0 boot.

Maestrale/Gea RS 2.0 Cuff Nut - The nut for the lateral cuff pivot on your Maestrale or Gea RS 2.0. Goes with the F1 Cuff Pivot screw.

Maestrale/Gea RS 2.0 Cuff Screw Blk - The screw that holds the inside cuff pivot and instep strap together.

Maestrale/Gea RS 2.0 Instep Strap Nut - The nut that holds both the inside cuff pivot and the instep strap.

Maestrale/Gea RS 2.0 Instep Buckle Rivet - The rivet that fastens the instep buckle to the boot.

Maestrale/Gea RS 2.0 Instep Buckle Washer - The washer that prevents the Instep Buckle Rivet from sliding out.

Maestrale/Gea RS 2.0 Upper Wave Catch Nut - The nut that holds the end of the Wave Cable to the boot shell below the instep buckle.

Maestrale/Gea RS 2.0 Shell Wave Cable Guide - The black piece that guides the Wave Cable back around on the lower shell nearest the toe.

Maestrale/Gea RS 2.0 Wave Cable Guide Nut: The nut that affixes the Wave Cable Guide to the boot.

Maestrale/Gea Shell Cable Screw - The screw that affixes both the toe-end of the Wave Cable as well as the Cuff Buckle Catch.

Outer Cuff Screw - A silver screw that holds the outer cuff pivot together on Maestrale/Gea series boots.

Rivet Holder - A metal washer for anchoring rivets that is used by the Maestrale, Gea, Alien, F1, F1 LT, and Alien RS.

Rear Tech Fitting - An individual heel fitting. Compatible with most any tech boot. (screw not included)

Square Inside Cuff Nut - Nut for the cuff pivot on first gen Maestrale/Gea boots.

Tech Heel Sole Screw - Screw that is used to mount Rear Tech Fitting to the heel of the boot.