Skimo Co
SkyRun

SCARPA Hardware

From $0.50

In Stock & Ships Today

Free shipping over $50

Find replacement hardware for SCARPA boots here. All parts sold as individuals unless noted otherwise.

Alien 1.0 Cuff Bushing - The bushing that helps your boot walk and is probably worn out if you’re looking for it.

Alien 1.0 Knurled Cuff Spacer - A ridged spacer used in the cuff pivot of the Alien 1.0 (old model).

Alien 1.0 Outside Cuff Washer - The outermost washer on your Alien 1.0 (old model) that helps keep the bolt tight while retaining walking ability.

Alien 1.0 Cuff Nut - The hexagonal threaded cuff nut that works in conjunction with the outside cuff washer and cuff screw to assemble the cuff pivot.

Alien Cuff Nut - The threaded cuff nut that works in conjunction with the outside cuff washer and cuff screw to assemble the cuff pivot.

Alien Cuff Screw - The screw that holds the Alien cuff pivot together.

Alien Outside Cuff Washer - The outside cuff washer for the first-generation Alien.

Alien Powerstrap Holder - The little clip that attaches onto the cuff of the Alien. Easy to lose but even easier to replace.

Short Rivet - Short rivest for buckels and eyelets for the Alien 1.0 and 3.0

Alien RS Rivet Long - The rivet used to affix cable guides and the leash ring to the cuff of the Alien RS.

Alien Tongue Screw - The small torx screw that attaches the tongue and Boa assembly to the shell of the boot.

AT Boots Catch Screw - The screw that bolts your ski/walk lever or buckle catch to your cuff or lower shell.

F1 Inside Cuff Nut - The nut that goes on the inside of the cuff pivot to help keep everything tensioned appropriately.

F1 Outside Cuff Washer - The external cuff washer that keeps your boots walking freely and looking pretty on an F1 or the outside lateral cuff pivot of a Maestrale or Gea 2.0/3.0.

F1/F1 LT Buckle Rivet - The rivet that attaches the cuff buckle to the cuff of F1-series boots.

F1/Maestrale/Gea Tongue Screw - The screw that attaches the tongue of the F1/Maestrale/Gea to the lower shell.

F1 Cuff Pivot/Freedom Buckle Ladder Screw - The screw that secures the cuff pivot on the F1 and F1 LT. Used as the outside lateral cuff screw on Maestrale or Gea 2.0/3.0 boots. Also attaches the ladder to the Freedom series boots.

Maestrale/Gea RS 2.0 Ski/Walk Mech Screw - The screw holding the Ski-Walk mechanism onto your Maestrale or Gea RS 2.0 boot.

Maestrale/Gea RS 2.0 Cuff Nut - The nut for the lateral cuff pivot on your Maestrale or Gea RS 2.0. Goes with the F1 Cuff Pivot screw.

Maestrale/Gea RS 2.0 Cuff Screw Blk - The screw that holds the inside cuff pivot and instep strap together.

Maestrale/Gea RS 2.0 Instep Strap Nut - The nut that holds both the inside cuff pivot and the instep strap.

Maestrale/Gea RS 2.0 Instep Buckle Rivet - The rivet that fastens the instep buckle to the boot.

Maestrale/Gea RS 2.0 Instep Buckle Washer - The washer that prevents the Instep Buckle Rivet from sliding out.

Maestrale/Gea RS 2.0 Upper Wave Catch Nut - The nut that holds the end of the Wave Cable to the boot shell below the instep buckle.

Maestrale/Gea RS 2.0 Shell Wave Cable Guide - The black piece that guides the Wave Cable back around on the lower shell nearest the toe.

Maestrale/Gea RS 2.0 Wave Cable Guide Nut: The nut that affixes the Wave Cable Guide to the boot.

Maestrale/Gea Shell Cable Screw - The screw that affixes both the toe-end of the Wave Cable as well as the Cuff Buckle Catch.

Outer Cuff Screw - A silver screw that holds the outer cuff pivot together on Maestrale/Gea series boots.

Rivet Holder - A metal washer for anchoring rivets that is used by the Maestrale, Gea, Alien, F1, F1 LT, and Alien RS.

Rear Tech Fitting - An individual heel fitting. Compatible with most any tech boot. (screw not included)

Square Inside Cuff Nut - Nut for the cuff pivot on first gen Maestrale/Gea boots.

Tech Heel Sole Screw - Screw that is used to mount Rear Tech Fitting to the heel of the boot.

Related Products

From $24.95
» Browse more SCARPA Boot Parts 

Questions & Reviews

1/17/2021
Question from andré
 
do you have this part from my scarpa meastrale with screw and nut ?
thanks
1/18/2021
Answer from Will M
 
Hey Andre,

Shoot us an email to help@skimo.co and we'll see if we can help ya out!
Answer this question:

1/3/2021
Question from Francois
 
For Maestrale orange colour:
I need the cant screw and outside ring. The attached picture shows what is left of the articulation. What’s it called? Do you carry it in stock? Price and delivery lead time please?
1/5/2021
Answer from Patrick C
 
Francois,

Unfortunately, we are not fully stocked on parts for that version of the Maestrale. If you email us at help@skimo.co we can look into special ordering those parts for you!
Answer this question:

10/26/2020
Question from Luke Brown
 
Hello! Looking for this nut and washer that attach the top buckle guide to the Maestrale RS boots. Which ones will these be? Many thanks!
Answer this question:

9/1/2020
Question from John S.
 
Hi, The allen head of the canting screw on my scarpa freedoms is stripped and will not stay tight. Can you confirm which hardware is correct? I would like to replace the cam, bolt and square nut inside the boot.
9/2/2020
Answer from Julieana
 
Hey John, the screw you're looking for is the "All Models Outside Cant Screw." As we don't carry the Freedom boot we also don't carry hardware specific to that boot model so I'm not completely sure these will fit your boot properly, but your best bet for the cam and nut replacement is the "Canting Cam" and "Canting Nut."
Answer this question:

6/7/2020
Question from Ty Guarino
 
I am looking for the outside cuff washer for the newest Maestrale RS (Black/white with yellow buckles). I am wondering if you have those or if they are the same as something else you might have in stock.
6/7/2020
Answer from Jeff
 
Ty, What you need is the F1 Outside Cuff Washer, it is the same for the Maestrale.
Answer this question:

6/4/2020
Question from Rainer Hummel
 
I need the square nut and Phillips screw that holds the Velcro power strap of my scarpa txpro boots. I see what looks like the right square nut on your site. Do you also have the screw? See attached picture for the two pieces of hardware I need.
Thanks!
6/4/2020
Answer from Jeff
 
Rainer, afraid we do not have either of those parts. All of the square nuts you see in the picures are larger, they are nuts for cuff pivots. You should be able to find a similar T-nut and matching screw in a hardware store.
Answer this question:

2/9/2020
Question from Ramon Garcia
 
Hello, I lose the cant screws of maestrale orange, black and blue. I found the picture of the cant kit in your webside, but I don’t know the name you give it to buy it. I attach the picture.
2/10/2020
Answer from Patrick C
 
Hello! I want to make sure that I understand what you mean by the, "cant screws," before telling you which part is appropriate. If you can send a picture of the broken piece on your boot to help@skimo.co we can help you from there. I look forward to hearing from you!

Patrick // Skimo Co
Answer this question:

1/21/2020
Question from Demetri V.
 
This question may have been answered above, but I just want to confirm. I have the (2015? 2016? 2017?) Scarpa Maestrale RS boots. Specifically, these are the ones with the white lower, black cuff, and orange/blue buckles (see attached image). This boot uses Scarpa's "Axial Alpine Technology." Which is fancy-speak for the tongue that swings out to the side. This tongue pivots about two grey (plastic?) hinges, and I have broken one of mine.

I know that Scarpa makes a replacement kit for these, but I can't seem to purchase them off of the Scarpa website. I noticed that one of the Scarpa Hardware options that you have is "Maestrale/Gea Tongue Hinge" and "Maestrale/Gea Tongue Nut." Would these be the replacement parts that I'm looking for?
1/25/2020
Answer from TSB
 
Hi Demitri, while I don't believe the tongue hinge or tongue nut are *exactly* what was specc'ed on your Maestrale RS (that looks like the 2015/16 vintage), they're as close to OEM as you'll be able to get! If you can send us some photos at help@skimo.co with metric measurements of the rivet hole and hinge length, we can confirm the fit on the parts.
1/19/2021
Answer from Juan G
 
Hi:
Any resolution on this? I have the same problem on the same boots.

thanks
1/19/2021
Answer from Meech
 
Hey Juan,

Of course! Skimo.co came through and hooked me up, as always. Not sure if they still have the parts in stock, though. I believe I remember needing to ream out the existing hole a little bit to accommodate the new hardware, but everything worked out in the end.
Answer this question:

12/15/2019
Question from Lee A Fortin
 
I need all the inner and outer cuff pivot hardware for the Scarpa F1. Do you have a kit for this or do I need to order individual parts? If it is individual parts what are they?
12/16/2019
Answer from TSB
 
Hey Lee, we do stock the inner and outer pieces for the F1 pivots; however, we're out of stock of the interior piece. Reach out to help@skimo.co to set up a special order or find a replacement part.
Answer this question:

11/20/2019
Question from martin
 
Hi,
On my Alien 1.0 the cuff bushing is probably worn out. Do I need special tools to replace this? I already tried to open the cuff screws using allen wrench but this needs quite a lot of force, so I stopped trying.
thanks, Martin
11/20/2019
Answer from Jeff
 
Martin, no special tools required. Probably the Loctite is tight. You can apply some WD 40 to loosen it up. And/or apply some heat to the screwhead to break it free.
Answer this question:

3/2/2019
Question from Rebekah Schroeder
 
I have the maestrale Rs ski boot. White with orange. Both the Cant screw are washer are missing. Do you have both? I sent a picture of the hardware I’m missing
3/2/2019
Answer from Jeff
 
Rebekah, We have the washer and the T nut that goes in the boot, which sounds like you still have. But not the screw. I went through the box and none of the screws will work. The washer is the 'Canting cam'
Answer this question:

2/17/2019
Question from DIRK SCHOONMAKER
 
Do you have the hinges for the Maestrale RS that hold the instep cuff to the boot and allows it to flip out of the way?
2/17/2019
Answer from jbo
 
Hi Dirk, I assume you mean the Maestrale 1.0? Unfortunately we do not have any of those.
Answer this question:

Earn store credit by writing reviews. Learn more.

Follow us on social media

View full screen version