Dynafit Binding Screws
Where did that screw go? Lose a screw behind the workbench or on your last run? We have more here. All hardware is sold individually.
Titanium Screw - Ultralight and strong screw for mounting Low Tech Race and Speed Superlite bindings.
12.5mm Torx Screw - For mounting Low Tech Race & Speed Superlite bindings, plus Speed Radical & Speed Turn 2.0 toe pieces.
15.5mm Torx Screw - The ST Rotation/Radical 2.0 flat head mounting screws, toe and heel. Also used for Radical and Vertical rental heels.
15.5mm Pan Head Torx Screw - For mounting all Radical 1.0 & Vertical heel pieces, except the Speed Radical from 2014/15 on.
16.5mm Pan Head Screw - Torx pan heads for Speed Rads with the anti-rotation peg, which started shipping in 2014/15 and is 1mm higher.
19mm Torx Screw - For mounting Radical ST/FT 1.0 & Vertical ST/FT toe pieces. Also used for shimming Speed Rads & Turns.
LTR Adjustment plate bolt + Nut - Used for mounting LTR race heels to Dynafit adjustment track.
Related Products
» Browse more
Dynafit Binding Parts
Questions & Reviews
11/3/2021
Do all these screws have the same thread size/external diameter? I'm trying to track down some helicoils for my speed rads repair kit but I think I need to know a metric or standard screw size.
11/3/2021
Stephen,
Great question! They do not all have the same diameter and thread count, however, they will all work with a helicoil. The helicoil is shaped more like a spring than a nut so can adapt to different thread counts. Hope this helps!
Great question! They do not all have the same diameter and thread count, however, they will all work with a helicoil. The helicoil is shaped more like a spring than a nut so can adapt to different thread counts. Hope this helps!
Answer this question:
10/26/2021
Need screws to install a 2-deg canting strip under my Speed Radicals (2020). Strip measures 1.3mm low and 3.17mm high. I think the lowside I go with the original screws and the highside I go 15.5mm toe and 19mm heel?
Check my math please! ;-)
Check my math please! ;-)
10/27/2021
Thanks for reaching out, Matt. Your math checks out to me! Ideally, 8mm of the screw thread should be in contact with the ski. Keeping with the stock screw size on the low side of the shim will push this lower than 8mm, however, it should still work. Please let us know if you have any other questions!
Answer this question:
6/28/2021
I lost one of the four small screws for the toe piece. What replacements should I get?
6/28/2021
Hey Sheila, thanks for reaching out! If this setup uses machine screws to attach the toe piece to the lower plate(instead of the wood screws that are typically used to mount a binding to a ski), I'll need a few measurements to make sure we have the right part.
Could you email me(help@skimo.co) the total screw length, head diameter and shaft diameter in millimeters along with a photo of the screws? Thanks!
Could you email me(help@skimo.co) the total screw length, head diameter and shaft diameter in millimeters along with a photo of the screws? Thanks!
Answer this question:
4/19/2021
I ordered the Dynafit Speed Radical bindings for a ski touring trip and I also need six spare binding screws as a backup. Which screws should I purchase?
4/19/2021
Phoebe-You will need the 12.5mm Torx screws for a speed radical toe.
Answer this question:
4/7/2021
Trying to see what screws do I need for the dynafit ST rotation10.
Thanks,
Thanks,
4/7/2021
Hi Tin,
The Rotation shares the same platform as the Radical 2.0, so you'll want 15.5mm torx screws for both the toes and heels.
The Rotation shares the same platform as the Radical 2.0, so you'll want 15.5mm torx screws for both the toes and heels.
Answer this question:
1/31/2021
Hi, filling out repair kit - what screws do I need for Speed Turn 2.0? Thanks!
2/1/2021
John- You need a 12.5mm torx for the toe and the Pan head torx for the heel.
Answer this question:
1/19/2021
What screws do I need for the Dynafit/Fischer Freeride 14s?
1/21/2021
Hey Logan, thanks for reaching out! I don't have that binding on hand to measure, but I can give you what information we do have. It looks like the toe would be the same as a Rotation. A Rotation uses 15.5mm Torx screw for both toes and heels. We aren't certain what heel screws are used for the Beast 14, but we think they might be 15.5mm Torx as well.
You'll want to put the screw into the binding to double-check before drilling, and you're looking for between 8mm and 8.5mm of screw length protruding beneath the binding.
You'll want to put the screw into the binding to double-check before drilling, and you're looking for between 8mm and 8.5mm of screw length protruding beneath the binding.
Answer this question:
11/14/2020
Hi! Can you send small parts to Norway?
11/14/2020
Hey Kim, yes we can. Once you get to the checkout page it should give you some shipping cost estimates.
Answer this question:
3/10/2020
What kind of replacement screws will I need for the 1) Dynafit Superlite 2.0 binding and 2) heel adjustment plate 3) screws to attach binding onto said replacement plate? Thanks
3/11/2020
Dave,
The Dynafit plates are the same thickness as the binding itself so you use the original screws that came with the bindings. Hope this helps!
Patrick // Skimo Co
The Dynafit plates are the same thickness as the binding itself so you use the original screws that came with the bindings. Hope this helps!
Patrick // Skimo Co
Answer this question:
2/17/2020
I have a pair of dynafit tri-step bindings and am missing the screws that sit on the top of the heel plate. There are two pairs of two and I am missing two. Do you know which screws I would need for those?
2/18/2020
Hey Mel, send us a picture of your bindings at help@skimo.co and we will figure out what you need!
Answer this question:
1/8/2020
I am purchasing one each of a Dynafit Speed Radical toe and heel. Seems like the heel will come with everything I need. For the toe, should I just purchase 4 12.5 Torx screws?
1/9/2020
Hello LDO, that is correct!
Answer this question:
12/28/2019
TLT Radical ST 2...seeking assortment of spare screws to have in an emergency repair kit. What are all of the sizes for toe and heel?
1/1/2020
Dale, they use the 15.5 Torx, toe and heel.
Answer this question:
11/16/2019
Hello, I’m looking for screws for my speed light 1.0 bindings. At least that’s what I think they are? Red toe pieces and red heel risers and black towers. They are mounted on adjustable plates. I need the screws to mount binding to the plate. 4mm hex screws I believe, not the torx screws for the plate to ski mount. Thanks!
11/19/2019
Preston, can you please send us a photo of the binding to help@skimo.co so we can more accurately help you.
Answer this question:
8/20/2019
What screws should I use for mounting Dynafit Beast 16s? I removed the bindings from a pair of skis with Quiver Killers and I don't have the original torx screws anymore. Thanks
8/21/2019
Fei, For the heel you will need the 15.5mm screws. For the Toe you will need 2 each of the 12.5 and 19.
Answer this question:
An awesome resource for the ski touring community from skimo co to get spare screws, springs, etc ... often easier to get than direct from Dynafit, and have pix available.
Comment on this review:
4/19/2018
Which screws for radical st 2?
4/20/2018
Hey Eric. Which screws for the Radical ST 2 are you looking for? Toe mounting screws, heel mounting screws, or the machine screws that install the toe unit to the rotating baseplate?
Answer this question:
4/7/2018
Would you happen to carry binding screws for Dynafit Radical ST ? Will likely be mounting on my Helio 95s that I just ordered from Skimo and wanted to use new screws.
Tony
Tony
4/7/2018
Hey Tony! Absolutely! Do you need toe or heel screws? Also, is this the first gen Radical ST or is it the 2.0 Radical ST?
Answer this question:
1/15/2018
Question from
Patrick Fink 
Do you have a set of mounting screws for a pair of TLT Speed Superlite 2.0 (green) toes?
1/16/2018
Hey Patrick! The 12.5mm Torx screws will do the trick! You need 4 per toe piece.
Answer this question:
4/18/2017
Hi. I cant find the screw to adjust the radical FT boot size? The long steel screw on the rear / bottom.
4/18/2017
Hi Magnus, the adjustment screw in the Radical FT baseplate is unavailable as a separate part. It is integrated into the brake/baseplate unit. You can purchase those here.
Answer this question:
4/9/2017
Hi I am looking at ordering a radical ST Toe piece, toe plate and crampon receptor. I was wondering about what length of screws I need to mount these. Thank you
4/9/2017
Hi Stefan, you will need the 19mm Torx screws for that setup.
Answer this question:
Earn store credit by writing reviews. Learn more.
