I’m debating between the atk r 12 and the Salomon MTN. What I like about the MTN is that you only need to twist the heel piece 90 degress to get into flat mode. With the ATK do you have to turn it 180 to get into flat mode or 90 is enough? Is it easy to twist while you are on the ski? I’m just picturing a situation where I’m skinning up with pins facing forward and got tired of it and want to twist heel piece without getting of the ski.
Can you get crampons for these?
ATK Raider 12 Binding
You flock to the backcountry because you don’t want to follow rules or be told what to do. Ski touring allows you to set a skintrack and go where you want. In the backcountry, there aren’t ski patrollers telling you to slow down or restricting where you can go. So, if you’re the type of skier who goes to remote places and enjoys popping off features while getting down the mountain in creative, unconventional ways - you can’t have your bindings telling you no! This is why the ATK Raider 12 has become world-renowned and will not be a wet blanket on your adventures. Its lightness is there to reassure you at the trailhead as you start your long ascent and its sturdy, freeride capabilities politely ask, “Thank you, may I have another?” after each big cliff drop. Adjustable release values top out at an impressive 12 and an optional freeride spacer keeps things stiff under the boot. Technically the 12 in the title refers to the release value, but it could also refer to the impressive, shock-absorbing elastic heel travel of 12mm. Ultimately, the ATK Raider 12 allows you to go where you want and ski how you like.
- Choose a release value between 5-12 to match with how you like to ski.
- Five different walk modes to ensure you have just the right height for the terrain.
- 12mm of travel in the Elastic Response System gives you plenty of cushion for bumps and drops.
- Easy Entry System makes stepping into your toe piece effortless.
- Snow Pack Proof feature prevents snow buildup for a quicker transition.
- Uphill Hardness Variator allows you to adjust toe piece locking mechanism pressure.
- Cam Release System featured in the heel piece drives your boot into place for a more consistent vertical release.
- Magneto Heel Flaps stabilize the heel risers so they only flip-flap when you want them to.
- 25mm of adjustment so you can use all sorts of boots on the same binding.
- Alu 7075, Stainless Steel, and POM materials used to make sure weight savings doesn't mean compromising on durability.
Update 2021/22: The toe piece has a new mounting pattern, with wider spacing. All bindings labeled as "2021" will have the previous 30/45 x 35 pattern.
Update 2023/24: This model was replaced by ATK Raider 13 Evo Binding.
| Specifications | |
|
Weight |
345g [97mm] |
| Weight (pair) | 690g [97mm] |
|
Boot |
Tech |
|
Brakes |
86, 91, 97, 102, 108, 120 |
|
BSL |
25mm |
|
Riser |
4 + flat |
|
Vertical |
5-12 |
|
Lateral |
5-12 |
|
Crampon |
Yes |
| Specs Verified | Yes |
| Design | |
|
|
7075 aluminum, POM, stainless steel |
| Skimo Co Says | |
| Usage | Touring |
| Notes | Optional Freeride Spacer in case you plan on going big |
| Bottom Line | Strength to weight ratio like Hercules |
| Compare to other Full-featured Bindings | |
Related Products
Questions & Reviews
10/12/2021
10/13/2021
Thanks for your question! With the R12, you'll need to turn the binding the full 180 degrees in order to utilize the flat mode. I personally own the binding, and while I mostly ski with the first riser covering the pins, the few times I've had to change the heel piece from flat to ski mode (with the ski on) have been painless. These will accept both ATK and Dynafit ski crampons. Please let us know if you have any other questions!
Answer this question:
9/25/2021
And it appears that the new new hole pattern (2021/2022) goes back to the original (2019) version?
9/25/2021
Hah, yes Eric, it seems like it was a one year experiment...
9/27/2021
Hey Eric, you are correct! ATK is now back to using the wider mounting pattern.
Answer this question:
9/8/2021
Hey whats the Pin Height Delta on these guys?
9/8/2021
Hi Caz
The delta on these bindings is +11.5mm. You can find more info on pin heights and deltas here.
The delta on these bindings is +11.5mm. You can find more info on pin heights and deltas here.
Answer this question:
Wow! What a great binding! Expensive, but worth it. Just got these mounted on a new pair of Voile Vector BC's. Skinned up Alta, took Challenger down in variable spring snow. Very sold feel, even on frozen crud. The toe springs are somehow enclosed, so they can't ice up. Also, the easiest to step toe into of any I've tried.
Comment on this review:
4/12/2021
Are these the 45 by 44 mm toe mount, or the “new pattern”, 45/25 by 44 toe mount?
I think I’ve got those those numbers right.
These bindings are the Mariner Kayak of ski bindings. That is, The Best. Sadly, you can no longer buy a new Mariner. But you can buy these!
I think I’ve got those those numbers right.
These bindings are the Mariner Kayak of ski bindings. That is, The Best. Sadly, you can no longer buy a new Mariner. But you can buy these!
4/13/2021
Hi Eric, these are fresh in from Italy with the new (2020/21) hole pattern. Our official toe measurements are 30/45 x 35 (See here). It is different than the rectangular toe-pattern found on the "R12" bindings from 2019/20 and the rectangular "Raider 12 2.0" pattern which was a binding with front brakes.
Answer this question:
Earn store credit by writing reviews. Learn more.
