If Febreeze is no longer a match for your liners, it may be time for a replacement. It’s also time if you’ve ripped out the tongue, completely worn them through at the rivets, or packed them out beyond recognition. Look for replacement Dynafit liners here, all of which are thermo-moldable (TF) so may even fit other boots.
DNA Bikini - No, not that type of bikini. This is the replacement liner for the DNA boot.
Dy.N.A. EVO - Race liners are thin and some of the first to wear out. The EVO liners fit in the PDG and DyNA boots and feature very flexible ankles. Some folks have even put them in TLTs in order to fit in smaller (and lighter) shells.
Dynafitter 10 - Replacement liner for the Radical Pro.
PDG - Slightly thicker race liners found in the Dynafit PDG boots.
Speedfit Pro Custom Ready Liner - Stock replacement liner found in the Speedfit Pro boot. 100% thermomoldable.
TLT6 CR Performance - Stock replacement liner found in green TLT6 boots. 100% thermomoldable.
TLT6 Custom Ready - Stock replacement liner found in pink TLT6 boots. 100% thermomoldable.
TLT7 Custom Light - The lighter liners found in the TLT7 Performance and Carbonio boots. 100% thermomoldable.
TLT7 Custon Ready - Stock liner found in TLT7 Expedition boots. 100% thermomoldable.
TLT8 Custom Ready - Stock liner found in TLT8 Expeditionboots. 100% thermomoldable.
Hey Andy! The Palau Tour Lite Performance Liner is your best bet here! Very similar construction, just the Dynafit ones say Dynafit on them instead of Palau! :)
Trace, I've read elsewhere on this site that the Palau TLP liner is similar to the thinner Dynafit CL liner. I want a thicker liner like the CR. Could you please clarify which liner (Palau, Intuition, etc.) would be the best replacement for the CR? Thanks, Andy.
Hey Andy! Doh! Sorry about that, I misread. Yes, you are correct, the Palau Tour Lite is most similar to the CL Liner. Something more along the lines of the CR liner is the Intuition Pro Tour which will definitely suck up a bit more volume in the foot than the Palau Tour Lite. The cuff on the Pro Tour is big and burly though, so keep that in mind. The LV version is more of a direct replacement liner whereas we tend to use the MV (standard) liner as a way to eat up a bunch of volume, which may work in your favor in this instance.
Answer this question:
12/22/2016
Question from
Ann
Are you going to offer the Dynafit TLT7 CR Liners? (The women's version would be great, with the lower rear cuff!)
Hi Ann, yes we are expecting availability in a week or two.
Answer this question:
4/18/2016
Question from
Nikolay
I have a pair of TLT6 Mountain older model(green boots, first year after tlt5), size 27.5(297mm shell). In a spring conditions my CR liner is too warm for me.
Is it a good idea to get a CL liner for my TLT boots? Is liner's size 27.0 gonna be too small? I know I need 27.5 but it's not in the stock.
Hi Nikolay, yes the CL is a thinner liner and is not as warm as the CR. Your fit may be affected, as there will be a bit more volume in the boot with a thinner liner. There isn't a big difference between the 27 & 27.5, especially after some skiing.
Answer this question:
1/28/2016
Question from
Mike
I have a pair of TLT-5 with size 307mm shell. Can I fit them with a 28.5 EVO PDG TF liner? what is the weight/pair of the EVO PDG TF liner?
Hey Mike, Yes a 28.5 PDG liner would work as a replacement for the TLT5 liner. The PDG liner is a little thinner in the toe box area than TLT5 was. If that would cause a fit problem, try the same size in the TLT6 CL liner.
9/14/2017
Answer from
Don B
September 2017 now ... I have the same Dynafit Boot as Mike TLT-5 307mm shell ... looking for a 28.5 liner. Is the 28.5 PDG liner going to be available this year? Any other recommendations? Thanks Don
Hi Jeb, the CL liner is the one that ships with the black and orange boots. It is thinner than the CR liner which ships with the mountain version. They are interchangeable.
