Pomoca Climb Pro S-Glide Skins
We’re not sure but we think the “S” stands for “Super”. The new Pomoca Super treatment on the old reliable Climb Pro Glide skins makes them even better at sliding. The friction coefficient is now more akin to racing formulas than to similar mohair-mix skins. Good sliding technique will be rewarded with up to 20% energy savings on an average climb, a figure extrapolated from recent lab tests. The Climb Pro S-Glides are 70% mohair, 30% nylon, and 100% fast. The skins feature the manageable Pomoca glue formula and easy-to-use tip brackets and tail clips. These are likely the default skin choice for interested ski tourers.
- Safer Skin Light membrane is waterproof, tear-resistant, and tends to hold its hairs in place.
- Ever Dry 2.0 is a water-shedding treatment that prevents potentially heavy water soakage.
- S-Glide concoction is applied at the end to give you a lifelong friction-reducing stride.
- ClickLock is a tip system that allows you to swap square brackets to match your ski tips.
- Adjustable tail clips ride up and down a thick stretchy strap that is notched for a good hold.
- Kits come with a trimmer that is much easier to use than the letter-opener style skin trimmers.
- Includes a skin bag for carrying your climbers and for long-term storage across seasons.
- Skins come with tips attached (except Universal length), otherwise known as "Back Fix" in Pomoca-speak.
- Universal Kits - 185cm of material with tails attached; cut to ski length and attach the 85mm or 95mm wide tip buckles (both included) before trimming.
- No Tips - A Universal Kit without the tip hardware...attach race bungees or your favorite touring tips.
Update 2020/21: The S-Glide skins are now made with thinner backing material and they have redesigned Click Lock tip attachments and tail hooks that enhance durability. The skins are about 40g lighter out of the box with the same grip and amazing glide. They now come in a zippered hard case.
Update 2024/25: Pomoca is phasing these out in favor of new tip and tail hardware on the new Tour Pro skins.
Specifications | |
Weight per skin (with backing) | 314g [120mm x 165-180] |
Related Products
Questions & Reviews
Is the difference between the grip minimal if the ski isnt fully covered in the skins or is it Noticeable? (140 mm or 120 mm with ski width 142-111-129)
Greetings Tijmen
It would be noticable on steep, firmer side-hills. With good skinning technique, not a huge problem. Either could work, but if you plan to use this setup in firm spring conditions, or if you are less confident in your skinning technique, you might benefit from the extra coverage.
To add to my last question
What length should I get for my 191 skis?
For a 191cm ski, get the 185-200cm length!
I have the Head Kore 111 (142,111,129) in 191 length, would you suggest the 120 mm or the 140 mm's.
Greetings Tijmen
You most likely want the 140mm width, if you want full coverage at the tail for grip. The 120mm will sacrifice a little bit of grip, but will glide better.
We do not sell precut skins for the Hustle 10, because we don't carry the Hustle. Blizzard does offer a precut skin for that ski, but you will not find it on our website. Precut skins for the Zero G skis will not work on the Hustle - the tip attachments are not compatible.
I would go with the Pomocas! They are great skins, and just need to be trimmed.
I would go with the 175-190cm length and the 120mm width. This would give you a more minimal amount of skin material with sufficient grip and great glide. If you wanted to maximize grip, you could size up to the 140cm width.
You will want the 175-190cm length. For width, 140mm will provide maximum grip. 120mm will grip slightly less, but glide better, and pack up smaller.
You will want the 120mm width. For length, you can go with the shorter 165-180cm size for better glide and lighter weight, or you could choose the 175-190cm and have more skin material for more grip. I would lean towards the shorter option, but it does come down to personal preference.
What size would you recommend for the Moment Bellas (134-108-127) in 162 cm? Thank you!
Personally, I would go with the 120mm width, for a bit better glide and less excess skin material to fold up. It would be wide enough to have plenty of grip still. However, if you want to absolutely maximize grip, you could go for the 140cm width which would completely cover the base. For length, you will want the 155-170cm option.
Just want to double check for a pair of atomic backland 95 (128-95-116 [177]) would you recommend the 120mm x 165-180 based on the the tail width or go wider to accommodate the tip?
And can you recommend a skin accessory part to set these up to use the notched tip on the Atomics?
Thanks in advance!
Yes, you will want the 120mm width, it will give you essentially full coverage. For length, in this case I would go with the 165-180cm length. You may not have quite enough tail strap with the shorter length as your 171cm ski technically falls outside of the range. If you've tried it and you know it works, and you don't mind having a very short tail strap to grab, then go for it - nothing wrong with a shorter cut skin. But to be safe I would recommend the next size up as a default.
Henriette
I would go with the 100mm width, 155-170cm length. You could also go with the 165-180cm length but then you will have very full coverage to the end of the tail, more than I'd personally want!
You will need to trim them, but the included Pomoca trim tool works well.
Looking to purchase these skins for my Moment Deathwish Tour 104s. Measurements are 179cm (132/104/124). Curious what size y’all recommend. Thank you!
Thanks,
Tim
Not exactly normal, no, but glad to hear they're still working for you. If you bought them from us, or have the original purchase receipt, we can potentially help you with a warranty if you email us at warranty@skimo.co.
Are 175-190 skins supposed to be only 165 cm in length? Or has something gone wrong with my order? On the cardboard that is around the storing pack it says 175-190 cm? But….???
Bedt regards, Kim
The problem is I probably won’t have time to order and receive the size XL before I have to go on my touring trip….
I have owned two pairs of Pomoca skins and both are the 165-180cm length, paired with 177 and 179cm skis - so near the minimum amount of skin material possible. I have never wanted the longer length. Especially since you opted for the 140mm width on a 106mm ski, you will have full coverage everywhere. I doubt you will be lacking for grip.
Would I want the 120mm or do I need the full 140mm?
Thanks!
I'd go with the 120mm - so long as the whole tail is covered, you'll get plenty of grip.
Which size do you recommend for the Movement Alps Tracks 100 (185)?
Thanks for your time!
Earn store credit by writing reviews. Learn more.