F1 Fast Buckle Velcro Strap x1 - The Velcro buckle/strap on the Scarpa F1 boots. These are sized in ranges and a bit different for left versus right.
F1 Power Strap x1 - The removable Velcro power strap (without a buckle) for the Scarpa F1. Be sure to order the correct size and left vs right.
F1 LT Fast Buckle Velcro Strap x1 - The Velcro buckle/strap on F1 LT boots. Please note the size and side you need. Women's straps come in blue while unisex straps are the stock orange color.
F1 LT Power Strap x1 - The removable Velcro power strap (without a buckle) for the Scarpa F1 LT. Be sure to order the correct size and left vs right.
Gea RS 2.0 Cuff Buckle - The upper cuff buckle for the Gea RS 2.0.
Gea RS 2.0 Instep Buckle - The middle buckle for the instep strap on the Gea RS 2.0.
Gea RS 2.0 Shell Buckle - The lowest buckle for the Gea RS 2.0 that sits on the tongue of the boot.
Maestrale 1.0 Instep Strap - The plastic strap across the instep of the first generation Maestrale. Be sure to order the correct size and left vs right.
Maestrale RS 2.0 Cuff Catch - Buckle catch for the topmost buckle on the Maestrale/Gea RS 2.0.
Maestrale RS 2.0 Cuff Buckle - The upper cuff buckle for the Maestrale or Gea RS 2.0.
Maestrale RS 2.0 Instep Buckle - The middle buckle for the instep strap on the RS 2.0 boots.
Maestrale RS 3.0 Instep Strap x1 - The plastic instep strap with a ladder-style set of teeth for the Maestrale/Gea RS 2.0 and 3.0. Be sure to order the correct size and left vs right.
Maestrale RS 2.0 Power Strap x1 - The velcro power strap for the Maestrale/Gea RS 2.0. Be sure to order the correct size and left vs right.
Maestrale RS 2.0 Wave Cable x1 - The cable that runs along the lower shell of the boot and is tightened by the Shell Buckle. Be sure to order the correct size.
Maestrale RS 2.0 Wave Cable Upper End Screw - The screw that secures the Wave Cable to the boot just below the Instep Buckle.
Maestrale RS 2.0 Wave Cable Upper Holder - The black plastic bit between the Wave Cable and the Upper End Screw.
Maestrale RS 2.0 Shell Buckle - The lowest buckle for the Maestrale RS 2.0 that sits on the tongue of the boot.
Hi Noah, I need both the right boot 1) instep strap and 2) instep buckle for what these Maestrale boots, sized 28.0 (I believe these the original 1.0 vintage). Do you sell exact replacements for these (or are there other compatible options)?
Noah, Those parts are all over the place. Screw - Scarpa Hardwear. Maestrale/Gea Shell Cable Screw The matching nut is here - ski walk. The F1/Alien 1.0 Ski/Walk Lower Latch Nut.
I’m missing this cuff attachment on my Maestrale AT R boot - do you have a compatible replacement I can order ? Thanks!
1/6/2023
Answer from
Gabriel I
Hi Della, we don't have this exact part, and the "Maestrale 2.0 Cuff Catch" from this page is too wide to fit in the buckle. I've got this same boot, though, and tried a few different catches that we do have around.
The "Hawx Ultra XTD Shell Catch Instep" from the Atomic Boot Parts page fits pretty well, though it doesn't have the keeper latch. I've used the original nut and screw here.
Answer this question:
12/31/2022
Question from
Maria
I have Scarpa Gea boots and am missing the top buckle. Can you advise on what the exact name of this buckle is and where to find a replacement? I attached the picture of the buckle from the other boot for reference
The Maestrale RS 2.0 Cuff buckle is the buckle you are looking for!
Answer this question:
12/11/2022
Question from
Dean Dalvit
Looking for a replacement for the middle plastic ratchet strap on my Scarpa T2 Eco boots, size 275. The plastic on them wore down pretty early on and the buckle slips now where I need it to latch - on both booths. I found the kit on the Scarpa website, but it looks like they only sell to retailers. They call it “KIT - NARROW MIDSTRAP WIRE, PAIR (17MM) 27.0-29.0“. Can you help?
From this listing, you would want the AT Boots Catch Screw in the drop-down menu. To find the backing nut you will need to go to Ski-Walk Mechanism Parts and choose the Square Back Nut, Ski/Walk Lever. SCARPA will use the same hardware for multiple boots just to keep us on our toes. Hope this helps!
Answer this question:
12/1/2022
Question from
Matt
Do you have this eyelet for the wire to pass through on this original F1 boot?
Hi Frans. The cuff buckles of the RS and XT look similar but are a bit different. We don't have an XT on hand here to compare so can't say for sure.
Answer this question:
3/23/2022
Question from
Jeff
Is there a mid zip buckle available that will accommodate my 20mm zip strap on my Scarpa T1s? Otherwise maybe I can file my zip strap down to 17mm for that size buckle.
Hey Jeff, we don't have a buckle that is compatible with your instep strap. Your best bet will be to reach out to Scarpa directly!
Answer this question:
3/22/2022
Question from
jeff
What size zip strap in mm will the Gear RS 2.0 instep buckle accommodate? What size will the Maestrale RS 2.0 instep buckle accommodate? Are they for "wide" zip staps? Scarpa is out of their "wide" mid buckle that I need. Can I return an item if it does not fit? Ty.
Hello Jeff, the Gea RS 2.0 and Maestrale RS 2.0 both use a 17mm instep strap, so I'm not sure the buckle can accommodate a "wide" strap. You are welcome to return a part if it does not work out, the caveat being return shipping is deducted from the refund. Our full return policy can be found here: https://skimo.co/account/return/policy
Answer this question:
3/10/2022
Question from
Emily
Do you have a replacement black mid-strap for a 2017 Scarpa Gea boot?
Thanks for reaching out, Jeff. If you want to replace both the buckle and "zip strap," you may be able to make the "Gear RS 2.0 Instep buckle" and "Maestrale RS 2.0 Instep Strap" work with some ingenuity (please note the instep strap is side/size-specific). Because we don't have the schematic for this boot, I can't guarantee any of the buckles will work with your existing instep strap.
Answer this question:
1/30/2022
Question from
Erlend
Hi! This part is missing on my left scarpa T1. Do you have this one in?
Thanks for reaching out, Jostein. We don't have the schematic for this generation of Maestrale, so I can't be sure which exact Scarpa part should be used. However, we do sell Scarpa hardware here. Also, you may be able to find a suitable screw at your local hardware store!
David- Unfortunately we do not have any parts that would work. I might suggest checking Freeheel life to see if they have anything for Tele boots.
Answer this question:
1/5/2022
Question from
petra
Hi, I am in a need of an instep strap. Right side, boot sz 297, strap width at buckle 17mm. Which strap should I order? How long is your average mailing time? I am currently in Calgary Canada, but heading back to Europe 12.2. Thank you! Petra
The part you are looking for is the Maestrale/Gea Tongue Hinge. We are expecting more soon, if you email us at help@skimo.co we can set up a notification for you. Hope this helps!
Answer this question:
12/11/2021
Question from
James
I have a pair of Scarpa Maestrale RS 1.0 (Mondo 29.5) and was looking to buy as a spare to have on hand the instep strap.
I am confused as it says they are sold in pairs but you also need to order left or right. Also your drop down list only has the right boot option...does that mean you are sold out of left boot parts? When might you have more?
Thanks for reaching out! We will not be ordering any more straps for the Maestrale RS 1.0 version. They are sold separately as left and right. If you want to explore options for finding you a part you can always email us at help@skimo.co.