Ski Trab Gara Titan Binding
Kudos to Ski Trab for an innovative toe piece! With a patented design that doesn’t require coiled springs, the Gara Titan approaches the 100 gram weight barrier that only recently seemed implausible. With the toe lever angled against included striker plates, the pins are pressed into the boot for a locked position. There is of course an unlocked ski mode to comply with ISMF rules, with the release based on an ultra-reliable titanium wire-spring. As with “traditional” race toes, pressing down on the Easy Lever allows the wings to open for exit. The heel is the same proven design used in the TR-Race model. The bindings come with either steel or titanium U-springs; the latter version is officially named Gara Titan World Cup.
- Patented toe piece weighs just 66g (2.3 oz) with both locked & ski modes.
- Design is less susceptible to pre-release caused by improper closure due to ice build-up.
- Heel piece has a pin-cover flap for basic skinning and rotates for a flat-on-ski position.
- Toe pins have grooves to help clear boot inserts of ice and dirt during rotation.
- Included removable crampon attachments (+4g) accept all Dynafit-style ski crampons.
- Included leash loops (+2g) provide convenient attachment points.
Update 2016/17: Trab has introduced a version with a thinner heel spring (4.5mm vs 5.0mm) for lighter skiers. Also, the toe piece has been redesigned slightly to better accommodate certain carbon race boots.
Update 2017/18: Trab added an even thinner spring (4.0mm) for an even softer release.
Update 2018/19: Ski Trab anodized the bindings with Skimo Blue! The build remains the same.
| Specifications | |
|
Weight |
111g [Titanium] 118g [Steel 4.5] |
| Weight (pair) | 222g [Titanium] 236g [Steel 4.5] |
|
Boot |
Tech |
|
Brakes |
None |
|
BSL |
Accessory plates |
|
Riser |
1 + flat |
|
Vertical |
Fixed |
|
Lateral |
Fixed |
|
Crampon |
Included Option |
| Specs Verified | Yes |
| Design | |
|
|
Ergal aluminum, titanium/steel, high-strength plastic |
| Skimo Co Says | |
| Usage | Racing |
| Notes | Next gen toes without coiled springs |
| Bottom Line | Crazy light, strong, and simple |
| Compare to other Race Bindings | |
Related Products
Questions & Reviews
9/16/2020
What is the difference between the normal and wc version? (besides the steel vs Ti u spring).
9/16/2020
Hi Peter, that's the only difference.
Answer this question:
4/20/2020
What ski crampon do you recommend for this binding mounted on the Atomic race skis?
4/21/2020
Hey Eric, your best bet if you're only going to be using these on your Backland UL 65 is to pick up the ATK ski crampon in the 70mm width. Not only are they light and have great bite on hard snow, but they also add to your Batman appearance (along with a black skinsuit of course). If you have other low-fat skis you'd like to use these new 'pons with, check out the shape-shifting Kreuzspitze adjustable ski crampon in the small size. Happy going-fast-on-consolidated-snow!
Answer this question:
I don't love the toe pieces. On the plus side, they do not build up ice in the springs and pre-release like other toe pieces. The immediate downside is all of the bending over (or delicate spearing with ski pole) involved in getting into one's skis. My bigger complaint is how often I come out of the toes. Without putting the toe pieces in lock mode I'm unable to kick my skis behind me to remove my skins (without accidentally kicking off the ski entirely, that is). Even when in lock mode, I still regularly pop out of the toe pieces (when falling, mostly). The long plastic lever has a tendency to slip past it's "lock" position into an upside-down floating position, which always takes some anxious finagling to get back into usable position. This seems to be happening more often as the binding gets older. I like the heel pieces, but I will not be keeping the toe pieces when I get my next pair of skis.
1/4/2020
Hi Mark, thanks for the feedback! Out of curiosity, what binding can you kick around while unlocked and have it stay on? If anything, we've noticed these tend to have stronger "unlocked" retention than other toes...some folks don't even lock them for uphill. As far as locked tension, we'd love to inspect your toes, but in lieu of that, it could likely be resolved with a shim under the lock plate (this is somewhat common across all tech toes as your boots wear).
1/4/2020
I developed my "kick the ski behind me to rip the skin from the tail" habit while skiing identical skis with Hagan ZR (branded as Movement Light Tech) bindings, which I was generally in the habit of leaving unlocked at all times. A shim under the lock plate seems like it would help the lock tension while skinning. Is there something pre-fabricated for this purpose, or could it be as simple as cutting out a strip of aluminum from a can and epoxying it under the lock plate? (If I was local, I'd just bring the skis by.)
1/4/2020
Hi Mark, it's rare to have a pre-fabricated piece (e.g. the Dynafit Superlite 2.0 ships with some), so doing what you suggest or similar works just fine. The Movement Light Techs did have fairly stiff toes; that model has changed a bit over time. Thanks for the input!
Comment on this review:
11/28/2018
between gara titan and titan vario, cant really see the difference other than a few grams in weigth. Could you give some light here! and between these two and the Dynafits?
thanks
thanks
11/28/2018
Hi Salvador, the Vario version has a different lateral spring mechanism in the heel which adds a lot of elasticity. It's a bit better in terms of release and retention when skiing unlocked. It also has a wider heel gap which can help with flat-on-ski skinning. Send us an e-mail if you'd like to discuss some specific Dynafit models (which vary greatly)!
Answer this question:
3/28/2018
Does the Gara Titan toe use the same 30x27mm mounting pattern as the other Trab bindings?? Thanks!
3/28/2018
Hey Robert! Yeah, same toe pattern between the TR-Race and Gara Titan bindings! Similar hole pattern to the Kreuzspitze, Plum, Hagan/ATK/Black Diamond/and some of the older Dynafit bindings.
Answer this question:
2/14/2018
What is the heel spring length (4.0, 4.5, or 5.0 mm)? I don't know which one to select.
2/14/2018
Hi Mark, all the springs are the same length. The measurement is the thickness of the spring, which varies the forward release value (roughly R8, R10, R12).
Answer this question:
9/18/2017
How well does the flat mode work, when compared to something like the Hagan? It looks like they're both mounted at a 4mm spacing, and both have very minimal plastic (i.e. almost none) sticking out beyond the horseshoe, so is the flat mode performance identical?
9/18/2017
Hi Brian, yes the flat mode is about the same as the Hagan ZRs. It works better with the Release version of the binding which uses a larger heel gap.
Answer this question:
Me: 5'10", 160lbs, type III skier. I have these mounted on my 177cm Movement Response-X, and ski them with green TLT6Ps. These are my first real race bindings, having been on the progression towards truly light gear for some time now. They're awesome. The toe is different from normal Dynafit-style toes in that it defaults to closed, you apply pressure to open it but it closes as soon as you release the pressure - there is no "locked open" mode like with most other tech toes. In practice this means you press down on the toe lever with a ski pole while entering the binding. On any sort of flat ground this is intuitive and straightforward. Like with any brakeless setup, this can be a somewhat riskier proposition on a sharp ridge or standing in a steep couloir. I have found that I am able to use my thumb to open the lever while I hold the ski in my hand in these situations, and I anyway haven't managed to have a ski run away yet!
The heel is simple and feels well constructed. There is a satisfying mechanical click into flat mode, and a single riser. The riser flap has no play in it whatsoever and stays in whichever position you put it in. I was told the RV was somewhere around 10 or 11 with my BSL / weight / skis and that seems right - I have not fallen on them a lot, and have released once when it was appropriate. The heel works with the Hagan ZR adjustment plates to save some weight over the adjustable version (at the time I purchased the setup it was cheaper also due to various sale prices)
I am 100% satisfied with this binding, it has everything I want (flat mode, low riser, the ability to go from uphill > downhill without rotating the heel piece) and nothing I don't feel I need (high risers, adjustable RV, brakes, etc). They also don't have a funky ramp angle or anything, even with the adjustment plate I stand very flat on the skis.
I'm a race binding convert after owning these... I'm curious to try some of the lighter race bindings with "normal" toes but I absolutely would not hesitate to buy these again.
The heel is simple and feels well constructed. There is a satisfying mechanical click into flat mode, and a single riser. The riser flap has no play in it whatsoever and stays in whichever position you put it in. I was told the RV was somewhere around 10 or 11 with my BSL / weight / skis and that seems right - I have not fallen on them a lot, and have released once when it was appropriate. The heel works with the Hagan ZR adjustment plates to save some weight over the adjustable version (at the time I purchased the setup it was cheaper also due to various sale prices)
I am 100% satisfied with this binding, it has everything I want (flat mode, low riser, the ability to go from uphill > downhill without rotating the heel piece) and nothing I don't feel I need (high risers, adjustable RV, brakes, etc). They also don't have a funky ramp angle or anything, even with the adjustment plate I stand very flat on the skis.
I'm a race binding convert after owning these... I'm curious to try some of the lighter race bindings with "normal" toes but I absolutely would not hesitate to buy these again.
Comment on this review:
10/23/2016
Hey Jason,
Do you know if the steel version has a higher release value than the titanium one? I'm wondering if the steel would be more on par with the Hagan/ATK heel?
Thx,
John
Do you know if the steel version has a higher release value than the titanium one? I'm wondering if the steel would be more on par with the Hagan/ATK heel?
Thx,
John
10/23/2016
Hi John, the RV is approximately the same on those. Like some other manufacturers, Trab shortens the U-spring in the titanium version to compensate for its lower Young's modulus. Highest RV is actually found in the Release version, which is on par with the Hagan. Note softer springs will be available later this season for both versions.
Answer this question:
8/15/2016
How does this binding stack up to the Hagan ZR in the ~100g category for potential use in a non-racing ultralight touring setup?
8/15/2016
Hi
The biggest difference between the Trab and the Hagan is the Trab toe works opposite to every other toe piece on the market. you push down on the lever to enter and the spring default is closed (with other bindings you push down on the lever and it stays open until you step in). Otherwise the binding makes a great ultralight touring binding. It has a decent flat mode and it's easy to turn heel piece. The only other consideration is this has a slightly lower release value than the Hagan. So depending on what setting you like to have while skiing, you might pick one over the other. You may also consider the Release version of this binding for touring which adds more heel elasticity at minimal weight.
The biggest difference between the Trab and the Hagan is the Trab toe works opposite to every other toe piece on the market. you push down on the lever to enter and the spring default is closed (with other bindings you push down on the lever and it stays open until you step in). Otherwise the binding makes a great ultralight touring binding. It has a decent flat mode and it's easy to turn heel piece. The only other consideration is this has a slightly lower release value than the Hagan. So depending on what setting you like to have while skiing, you might pick one over the other. You may also consider the Release version of this binding for touring which adds more heel elasticity at minimal weight.
Answer this question:
12/30/2015
I have used this binding for only a week now so I can't speak to the longevity of the product. Having used ultralight race bindings for descent oriented ski touring for the past four years, I can say that these certainly feel the most robust of the lot. The heel cover is sturdy. The heel piece rotates smoothly into the flat touring mode without undue force. I quickly became accustomed to the toe piece's requirement for active pressure when engaging the boot. One can use one's hand or the tip of a ski pole and it has not proven to be a factor with regard to time during transitions. I have yet to utilize the locked position of the toe piece while skinning uphill or skiing downhill which suggests that releasing from the bindings is going to be unlikely when I fall. One must remember that this is a minimalist's binding as it has no heel riser, brake, or reliable release. For people that are primarily focused on weight while ascending and are potentially interested in a binding that allows big turns while descending, this Trab binding has proven to be a great option thus far.
Reply to this comment:
Earn store credit by writing reviews. Learn more.
