New parts for old bindings can be hard to find. Used parts for old bindings should now become easier. Trade in your used and/or broken Dynafit bindings for store credit, and we will make the working parts available for others. Please note that the photos shown here are often of new products, simply for reference. The item you receive may have visible wear. Used parts can be returned within 10 days if you are unhappy with the condition or discover the part will not work for you.
Please note these parts come with absolutely no warranty. We do a reasonable eyeball inspection of the parts, but can in no way guarantee their integrity. If you are not comfortable taking risks with used parts, please purchase a new part, toe, heel, or complete binding instead.
Check the drop list for the parts we currently have in stock. For parts with model names, the model should match your binding exactly. If a part works with more than one model, we use a generic descriptor with a reference chart below. Some specific notes:
B&D Classic Shim, 6.4mm - Drilled for ATK toe pieces.
B&D Speed Plates - Flat top plates for Dynafit binding heels which weigh just 20 grams per pair. Go without a high riser and save up to 60 grams (2.1 ounces) over stock Classic, Comfort, Vertical, or Speed Turn roofs.
Brake Retainer - Retainer "H" clip that holds Vertical, Comfort, and first-gen Radical brakes onto the heel piece.
Expedition Heel Pieces - Note, these are Non releasable bindings. includes mounting screws
Heel Adjustment Screw - Big lateral release screw cap for Radical 1.0, Speed Rad, Speed Turn. Often grey color.
Heel Thimble Bushing - Bushing that holds the lateral springs deep within Vertical, Radical 1.0, Speed Rad, and Speed Turn heel towers.
Radical 1.0 Crampon Receptors - The curved metal pieces that hold ski crampons onto Radical 1.0 toes.
Radical 1.0 Heel Pins - Pin with plastic spacer they pass through. Works with Radical 1.0 ,Speed Rad, and Speed Turn bindings.
Radical 1.0 Roof - Black top piece with risers for the Radical ST, FT and Speed Rad.
Radical 1.0 Roof Screws - The little Torx screws that hold the Radical 1.0 roofs on.
Radical ST Heel Complete - Heel piece like new. With screws.
Radical ST 1.0 Heel Turret - Includes the heel turret, heel adjustment screw, springs, and thimble bushing. Does not include the baseplate. Also compatible with the Radical FT.
Radical ST/FT 1.0 Toe Piece - Whole toe unit, but no baseplate or screws.
Radical ST/FT 1.0 Toe Plate - Plastic lifters under the Radical ST or FT (1.0) toe pieces.
Radical ST/FT 1.0 Heel Baseplate - Baseplates for the very first version of the Radical 1.0 that had removeable brakes (brakes not included). The newer version with the integrated brakes are listed as Radical ST/FT 1.0 brakes.
Radical Removable Brakes - Brakes for the first version of the Radical 1.0 bindings that required the "H" clip brake retainer. Retainer not included, listed as Brake Retainer above.
Speed Rad Heel Base - Adjustment mechanism w/ heel post. Often the older model with a brass pin for anti-rotation.
Speed Rad Heel Turret - A heel piece minus the base plate.
Superlite 2.0 Toe Piece, Green - Toe piece only with crampon connector and connector screws
Tristep Volcano - Can be used on Speed Turn, Radical or Vertical bindings.
Vertical ST/FT Toe Piece - Toe piece for the old ST or FT (as listed), w/out baseplate.
Vertical ST/FT Toe Plate - Plastic baseplate that goes underneath the toe pieces. Includes integrated metal crampon receptor.
Vertical ST/FT Heel Piece - Brakeless heel piece for the Vertical ST or FT (as listed), including base plate. These are sometimes white and sometimes brown. Brakes sold separately.
Vertical ST/FT Heel Turret - The whole turret that rotates on the base plate tower, complete with riser. No baseplate
Vertical Brake - Brakes that work with either Vertical model (ST or FT) and likely the Comfort series.
Hey Ronda, thanks for reaching out! There are some aftermarket parts that replace that roof and heel riser, let me know how else I can help!
Answer this question:
10/16/2020
Question from
Gabriel
I'm looking for the spring set of the brake. It's a Dynafit Radical. I just want to be sure in which subassembly this part is. Will it come with the Radical ST Brake? Thanks!
Hey Gabriel, we do not have this spring set available separately for this Radical ST 2.0, but you can purchase the whole brake/baseplate assembly. Note that these are sold as individuals(you will need 2 for a pair of skis), and the type you need is labeled as "ST Rotation" because that binding has been renamed.
10/16/2020
Answer from
Gabriel P
Thanks Teddy. Just to be sure, are you telling me this assembly isn't available used? Does the "used" name is the same as the "new" name? Thanks again.
Correct, we don't have any available used, but they would be labeled "Rotation Brake" or "Radical 2.0 Brake" if we did have any on this used page. The "Radical ST Brake" is a different binding model that uses the '1.0' design. Dynafit naming conventions are certainly tricky!
Answer this question:
9/1/2020
Question from
Vincent M
Hi, I damaged one of my bindings while attempting to adjust them forward for a new boot with a shorter sole. The plastic part in which the forward adjustment bolt screws broke. Who you have a spare part? Thank you!
Hey Vincent, we do have some spare base plates and parts that might work for you. If you could email us at help@skimo.co with a little more information on what exactly broke and which part(s) you're needing we can hopefully get you squared away!
Answer this question:
6/23/2020
Question from
Chloe
Hi
The toe lever broke on one of my speed fit bindings - I'm wondering if you have a used one that I could use to replace the part on mine or if I could buy one speed fit toe piece? let me know thank you!
Chloe, We do not have any used toe pieces now. You can purchase a complete new toe here Dynafit toe pieces. The Speed 12 is the same as the SpeedFit.
Answer this question:
6/23/2020
Question from
Richard Codell
I just got a used ski set with Dynafit bindings. Heel says "FT" but that's all I know. On of the heel steps is broken and I would like to replace it. One of the parts listed under used parts looks similar or identical, but I don't know what you call it. I attached photo of the broken part. Can you sell just the part I need or must I get the whole heel unit? Thanks
Sierra, looks like you will need to replace the roof (#5) of your binding. When issues like this occur it is not uncommon that there is something else is broken. When disassembled take look and see if there are any other issues. Unfortunately we do not have that piece in stock at the moment but used parts come and go, so check back at a future date and maybe we will have the part you need.
Answer this question:
2/14/2020
Question from
Alex D.
I am looking for item #9 from the first photo (little metal thing part of the rear stopper). How I can order it from this site?
Alex, that is the H clip for Vertical brakes. It hasn't been available separately for a long time. The only way you can get it is by ordering a complete Vertical brake Dynafit brakes. Scroll down to Vertical ST, 92mm , that is the only one we have left.
Answer this question:
2/13/2020
Question from
Lars Patterson
i cant find were to order a dynafit tour lite thimble
The Speed Radical toe pieces would be a good option for you and your splitboarding adventures. Have fun out there!
Patrick // Skimo Co
Answer this question:
1/25/2020
Question from
Jeffrey Creamer
Are LTR heels compatible with non-auto locking toes? e.g. will the lateral release with LTR heels + other dynafit toe models in ski mode possibly result in unintentional release in non-extreme conditions? Yes I realize skier/ski+boot length matter and these heels don't have a quantifiable DIN. In general is, say, a superlite toe plus LTR heel inadvisable?
Hey Jeffrey, while I can't speak for certain without bench-testing the combination, I doubt that the LTR heel would provide additional reason for lateral pre-release. The LTR is and has been offered in both auto-locking and manual-locking versions without noted differences in the heel pieces, so I think you should be all set with a Superlite toe (which is in itself a very close sibling to the LTR manual toe piece).
Hi Jeffrey, the LTR 1.0 Manual always tested pretty low, like 5-6. The LTR 2.0 tests higher unlocked.
Answer this question:
11/21/2019
Question from
Cody Fosbrook
I have LTL Vertical ST bindings and am looking for the spinning heel riser assembly of which a piece broke off. It looks the same as the riser assembly that is yellow in the pictures above but I don't see it in the drop down menu. Is there one available? Thanks.
Cody, I believe you are talking about the 'Vertical Roof / Volcano'. If it is something else you are looking for, please send a photo of what you need to help@skimo.co .
Answer this question:
10/27/2019
Question from
Becky
Hi. I have a pair of Dynafit Comforts that I've used without breaks for years. Now I'm resort skiing with kids and would like to install the breaks. I am missing one retainer clip. Do you sell them? Or should can I buy one Comfort break and assume a retainer clip will be included?
Becky, sorry to say but the H retainer clip is not available separately any longer. I looked, the used Comfort brakes we have do not have the clips with them.
10/28/2019
Answer from
Becky P
Thanks for checking! That's a bummer.
Can I also ask, does the Comfort binding have an adjustable toe height? I'd like to understand if they're compatible with Scarpa Gea boots (I've been using Scarpa Magic without problems).
Answer this question:
10/20/2019
Question from
francisco bocaz
I need piece #9 in the diagram for an vertical ST binding. Do you have one available?
Hi Justin, that won't work. You need the Plum receptors.
Answer this question:
4/18/2019
Question from
Conor
I searched through prior questions in an attempt to avoid asking my own, apologies if it is a duplicate. Was looking at a friend's Radical binding, and it looks like the same roof screw pattern as my Speed Turn 2.0s. Could I swap roofs for flip levers if I came across a spare Radical roof?
Hi Conor, unfortunately that doesn't really work as the base tower detents are different and you'll have the heels spin on you. You could use a Maruelli anti-twist to counter that though.
Oh, interesting, didn't think swapping roofs would have such an effect. Thanks for the quick feedback!
Answer this question:
4/9/2019
Question from
Jeremiah
I have TLT Vertical FT12 bindings (white) with broken top heel riser. I see you have a vertical ST heel piece listed. Does this part include the top heel riser?
Harrison, We have a variety of Speed Radical heel parts. Please call us to let us know exactly what you need and let you know if we can put something together for you. (801) 942-9084
