Showing results for "heel piece"
Wear out a fork? Lose a screw? Decide to add the oddly expensive crampon attachment? Whatever you're into, we will try to help. Find our growing list of parts for Plum bindings below:
Crampon Attachments - New (x2) - Machined receptors for Oazo and Race 150/170 toe pieces, including the required screws. This attachment system is only compatible with Plum ski crampons, and will n..
From $0.25
Replacement parts and innovative accessories from Kreuzspitze. Find our growing collection of Kreuzspitze binding parts below, typically sold in pairs except for the screws/bolts/nuts.
Crampon Attachments, Race - The machined receptors that need to be mounted under the RS, RSA, SCTT, SCTTT toe pieces. Accepts standard tech binding crampons. 8 grams.
Crampon Attachments, Steel..
From $0.25
Getting the right ramp angle on your bindings can make the difference between skiing on-point or in the backseat with tired quads. B&D makes shims for almost every occasion. Choose a shim based on your binding and desired pin height delta, which can take some experimentation. Shorter boot sole lengths are more affected by delta because they end up with a higher ramp angle, thus..
$0.40 From $0.40
Where did that screw go? Lose a screw behind the workbench or on your last run? We have more here. All hardware is sold individually.
Titanium Screw - Ultralight and strong screw for mounting Low Tech Race and Speed Superlite bindings.
12.5mm Torx Screw - For mounting Low Tech Race & Speed Superlite bindings, plus Speed Radical & Speed Turn 2.0 toe pieces.
15.5mm T..
From $0.40
Replacement parts and accessories for Ski Trab TR-Race, Gara Titan, and TR-2 bindings. All are sold in pairs. Also see our listings for complete toes and heels.
Crampon Attachments - Slide underneath the toe pieces and accept standard tech binding ski crampons.
Heel Forks - Choose from titanium or steel (+9g) replacement heel forks for your Gara Titan, Titan Vario, and TR-Rac..
From $0.45
Whether it's replacement parts or additional accessories, here are all the bits and pieces we have collected for your ATK bindings.
Titanium U-Springs - Pair of titanium heel forks for the SL World Cup and Revolution bindings. Also works with the Hagan Ultra, ZR, and BD Helio 110 bindings. Available in standard stiffness and "lightweight" for lighter folks.
Rolling In U-Sprin..
From $0.45
Find replacement hardware for SCARPA boots here. All parts sold as individuals unless noted otherwise.
Alien 1.0 Cuff Bushing - The bushing that helps your boot walk and is probably worn out if you’re looking for it.
Alien 1.0 Knurled Cuff Spacer - A ridged spacer used in the cuff pivot of the Alien 1.0 (old model).
Alien 1.0 Outside Cuff Washer - The outermost washer on y..
From $0.50
Parts for your G3 ION Binding. If you don't see the item you need, please contact us and we will do our best to get it for you. Please note some items are sold individually (x1) and others in pairs (x2).
ION Crampon Connector - Adapter kit for attaching G3 ION ski crampons. Included with ION crampons, the kit can also be mounted flat to attach them to any ski. No mounting hardwa..
From $0.75
Break a part or lose a set of springs? Don't be glum, we have a growing list of parts for Salomon and Atomic bindings. Details below.
MTN Women’s Heel Springs - The softest heel springs for the Salomon MTN or Atomic Backland binding. Sold as a pair.
MTN Men’s Heel Springs - Pair of the middle release-value springs for the MTN and Backland bindings.
MTN Expert Heel Springs ..
From $0.95
Maruelli is the Italian version of B&D, making useful aftermarket parts for tech bindings. They use the highest quality materials to ensure modified products are even more robust than they started. Find our growing list of Maruelli binding parts below.
Speed Antitwist Base x2 – Machined out of Titanal, this heel baseplate/spindle for the Speed Radical binding has a metal pos..
From $3.95
Leave it to B&D to solve all your Dynafit mounting problems. The toe and heel shift plates can handle just about every drill hole and boot sole length configuration imaginable. Mount a plate to your ski and then screw your Dynafit toe or heel onto the plate. See below for some options, all of which come with adjustment bolts (mount toe plates using your binding's screws or get ..
From $3.95
New parts for old bindings can be hard to find. Used parts for old bindings should now become easier. Trade in your used and/or broken Dynafit bindings for store credit, and we will make the working parts available for others. Please note that the photos shown here are often of new products, simply for reference. The item you receive may have visible wear. Used parts can be returne..
From $5.00
Toe plates, heel plates, extension plates, and more. These are all the parts you need to make new those hand me down Radical or Vertical bindings. Please note that heel bases with integrated brakes are listed in our brakes section.
Speed Radical Heel Base - Adjustable base with tower that holds Speed Rad heel housings.
Radical ST Toe Plate - The plastic riser plate under the ..
From $9.95
Snap a cable on your Cramp-ins? Manage to lose a hook? Pick up a replacement or backup spare parts for your Dynafit Cramp-Ins here.
Cramp-In Cable - The cable connecting the toe and heel pieces of the Cramp-In crampon. Sold individually.
Cramp-In Hook - The metal hook at the front of the crampon that attaches to the front of the boot. Sold individually.
Cramp-In Adapter fo..
From $19.95
Telemark parts by Kreuzspitze, mostly designed for use with the Kreuzspitze tele-tech kit. Enjoy long travel with the innovative cable system that features swappable springs. Tune your stance with risers and spacers.
Tele Cable System - Backcountry heel kit with replaceable springs. Cool design that lets you swap springs to control the tension. Comes with "standard" tension spri..
From $23.95
PLEASE NOTE: We have moved the shims to a separate listing: B&D Shims
The engineering and machining wizards at B&D Precision in Redding, California also happen to be backcountry skiers. It's therefore not surprising that they dabble in making ski gear. Enough years of dabbling have earned them brand recognition for aftermarket solutions to common backcountry problems. We..
From $24.00
One of the benefits of having a modular binding like the Marker Alpinist is that you can swap and replace parts as you please, but it also allows them to be lighter and better adapt to the individual skier. Here are a few of the spare parts we are stocking. All parts are sold in pairs.
Alpinist Heel Platforms - The heel support pads used in flat-on-ski mode which must be removed..
From $29.95
With new gear coming out every year, it can be hard to keep up with all the fads and trends. It seems like every season, a tried and true classic gets tossed out the door in favor of a new, modern, stylish alternative. Gore Tex sunglasses? Breathable water bottle? Ultralight kevlar bulletproof socks? Sometimes, all of these innovations get to be too much, and you find yourself long..
$31.95
Kreuzspitze has come to the rescue for skiers who find they have too much ramp angle in touring bindings. The 14-millimeter adjustment plates are screw-hole compatible with Dynafit TLT Vertical / Radical / Comfort / Speed heel units. That means you can replace a touring heel with a race heel without redrilling. Also available are 18mm and 40mm heel plates, a fast rental-style 40mm ..
From $44.95
Want to use your Plum bindings with a boot quiver? Add some adjustability with these plates from Plum. All plates are sold in PAIRS.
40mm Heel Plates - The rails offer 40 millimeters of fore/aft adjustment for the Plum Race 135/145/150 bindings. The kits use the same Torx T-25 bolts found on the Plum 165/170s. The 6.5mm thick plates weigh 34g (1.2 oz) plus another 10g for the nu..
$44.95 From $39.95
Rather than integrate the brakes into the bindings, Atomic decided to make it easy on you. Manufactured in five different sizes as a modular accessory to the Backland Pure binding, the brakes sit directly underneath the baseplate of the heel piece. This affords a lot of flexibility for weight savings (remove the brake) or ski width changes (replace the brake). One large lever is th..
From $59.95
Have a Gara Titan or older TR-Race binding that won’t fit your new boots? Ski Trab adjustment plates are the solution. All plates are sold in pairs.
Race Heel Plate - A bolt-tension plate with 60mm rails. With these plates, a brakeless Ski Trab race (gara) heel will have around 25mm of adjustment range. Made with bomb-proof Ergal aluminum which weighs in at 29 grams (1.0 ounce) ..
From $64.95
Tech bindings are not as straightforward as alpine bindings to mount. Heel pins need to be aligned with the tech fittings on your boot, requiring careful adjustment of the toe piece. The spacing between your boot and heel housing needs to be set precisely, which is especially tricky with un-adjustable race bindings. The release need to be tested with special tools.
We will mount..
$69.00
Here lies a collection of various brakes made for ATK ski bindings. Most often available in 75mm, 86mm, 91mm, 97mm, 102mm, 108mm, and 120mm widths. These are the replacement brakes for ATK's touring line. If you're looking to add brakes to a race binding, check out our separate listings for ATK Race brakes or Touring Brakes.
Crest / Raider - These are spare brakes for full-featu..
From $69.95
Need a replacement tech toe? Want a backup for a critical mission? Just need toes for a splitboard? Have only one leg? Whatever the reason, you can't go wrong with Dynafit binding toe pieces. Select from the optionally-auto-locking Low Tech Race; race weight but non-auto-locking Superlite; or the sturdy Radical toes with Power Towers, amongst others. Here are the details:
..
From $79.95
A nice feature of Petzl Crampons is the ability to mix and match toe and heel pieces. Steel for the front when ice is involved, but switch to aluminum when hitting a simple snow couloir. It's also nice to be able to order a spare toe for a trip or replace one if you kicked a little too hard into granite. Known as "Front sections" in Petzl parlance, replacement toe pieces are availa..
From $79.95
Taking a hut trip or long traverse and want some backup? Want to revive an old, beat-up pair of skis? G3’s tech heel pieces are available separately and now you can rest knowing you don’t have to buy a new binding when one component takes a beating. The heel pieces are priced and sold individually, without brakes/baseplates.
Please note this listing is just the turrets. Find the..
From $81.95
Hardened steel forks? Check. Flat-on-ski mode? Check. Optional risers? Check. Optional adjustment plates? You betcha. The Trofeo heels from Kreuzspitze are long on features and quality. The small Italian manufacturer makes the heels in-house with the rest of their RS bindings and accessories. We think Kreuzspitze won't be a strange name for long. Sold individually, so get 2 for bot..
From $84.95
B&D is now making bolt-tension adjustment plates, in addition to their threaded-hole shift plates. This allows you to fine tune your heel pieces for different boot sole lengths. Interestingly, each fore & aft screw pair is connected underneath the plates. This makes it easier to attach a binding since the bolts will always be spaced the proper distance. It also increases th..
From $84.95
The Italians are always on the leading edge of ski technology and Trab in particular has both speed and safety in mind. With options for all Ski Trab bindings, these brakes are mounted directly underneath the heel piece, which results in a secure connection that will stand up to the rigors of the backcountry.
Gara Race x2 - ISMF compatible brakes for the Gara Titan Brake race bi..
From $84.95
There's nothing worse than having an awesome backcountry setup that you can't use simply because of one measly broken heel piece. Fear not, as these ATK heel pieces are sold individually for a less costly replacement process. Single heel pieces are also good when you want a just-in-case spare.
Binding Model
Weight (g)
Weight (oz)
SL World Cu..
From $84.95
If you already have ten toes, you might consider getting some heels to match. The Dynafit binding heel pieces can be used to replace borked ones, build an unsanctioned super binding, or be stashed in your collection of other unusual parts. It's also not a bad idea to have a backup plan if you're planning an extended stay in a remote place. See the table below for details.
..
From $89.95
Maybe you need a replacement. Maybe you're building a franken-binding. Maybe you just want to lighten up your heels. We won't ask what you do with them, but we will take your money. These are Plum binding heel pieces, priced & sold INDIVIDUALLY. If you buy two, they come in a boxed set. If you buy one, we'll just put a stamp on the top and hope for the best. We'll even loosely ..
From $92.95
Mounting these plates between Dynafit race bindings and your skis will give you some fore/aft adjustment. This allows you to use different boots with the same skis, adding to their useful life and increasing the resale value of your rig. The Dynafit adjustment plates are made with 7075 aluminum, meaning they are light and strong. All plates are sold in pairs.
DNA / Mezzalama Hee..
From $99.95
If you did in fact have your bindings mounted when you lost your toes, that means you also lost a heel piece. Get a replacement for that here.
Binding
Weight
ZR
39g (1.4oz)
Ultra
40g (1.4oz)
..
$124.95 $99.95
I'm not sure how you just did that, but looks like you need a new heel piece. We've got you covered with our offerings of Salomon heel pieces. If you need a toe, check out our listing for Salomon toes.
Salomon MTN Pure Heel Piece - Heel piece, track and screws. Comes with the Standard spring installed (which they call Men's).
Salomon Shift 10 Heel Piece, Black x1 - Comes with..
From $99.95
We are sorry to hear about your Atomic bindings! Fret not, below you will find replacement heel pieces for Atomic touring bindings, ensuring you can get back out there in no time. If you need a toe instead, check out our Atomic Toes.
Atomic Backland Pure Heel Piece x1 - This is a replacement heel piece for the Backland Pure bindings, which are not brake-compatible. Comes with th..
From $99.95
As the saying goes, "Skiing happens and heel pieces break." If this sounds like your situation, and you are an owner of a Fritschi binding, you've come to the right place. Below you will find replacement heel pieces for Fritschi bindings. Please note these are sold individually, so buy two if you need a set.
Xenic 7 - The replacement heel piece found on stock Xenic 7 bindings an..
From $109.95
The patented brakes from Kreuzspitze are cool removable devices that slide into your crampon slot. They are secured by a simple locking switch (included) that is mounted with a single screw under your foot. Take them off when skinning uphill, slide them back on before skiing down. The brakes will retract when you lock your heel into ski mode and deploy when you have a yard sale. Gr..
$119.95
These aren’t your mother’s stilettos. Ski Trab now sets the latest fashion trends in Italy, and it’s becoming fashionable to waltz around in Titan high-heels. If you’d like to keep up with the latest trends, or just get back to skiing, check out these binding heel pieces.
Gara Titan WC – Trab's lightest race heel. Ships with a titanium U-spring installed and the required mountin..
From $119.95
Hallelujah, it’s raining toe pieces. G3 is now selling toe and heel pieces separately. Taking a long hut trip and don’t want to risk gear failure that’d end the trip? Maybe you dropped your skis out of your roof box and only the toe piece broke? Lost a ski in avalanche? Fear not, spares are available. Choose your model in the drop list, from the various ION flavors to the new Zed. ..
$119.95 From $89.95
We know what you're thinking. How can the Leki Haute Route Pole be superior to all other poles? Well, it is. Don't believe us? Fine, we'll let the features convince you. With the extended grip, you'll be able to handle all the steeps that you'd typically encounter on the actual Haute Route. Steeps also include the steep stairs to your delicious meal made entirely of raclette. The p..
$119.95
Here you will find heel pieces to bring your beloved Marker bindings back from death's cruel grasp. Please note all items are sold individually so if you need to replace a set of bindings, you'll need two.
Marker Alpinist 8 - The stock heel piece that comes with Alpinist 8 bindings, includes mounting screws.
Marker Alpinist 10 - The stock heel that ships with the Alpinist 10 ..
From $119.95
The Kreuzspitze Heel Brakes are a fantastic accessory for the skier with a light setup who wants (or needs) brakes. This permanent brake is meant to be installed underneath Dynafit heel pieces while mounting the binding on the ski-- Kreuzspitze also offers a removable version (found here), which clips onto the ski crampon attachment point. Like many pin tech bindings with brakes, w..
$124.95
Italian toes are more likely to be held onto skis using these widgets. If you’ve got toe problems or just want your feet to look more Italian, get some new binding toe pieces here. This is our growing collection of Ski Trab binding toes.
Gara Titan – Lightweight toes from Ski Trab. They don't have coiled springs, instead you press down on the lever to open the wings and step in...
From $129.95
Sporting a reliable aluminum construction, the Free Vario pole is made to go the distance. The bomb-proof Pressure Lock System allows for quick adjustments between 105 and 145cm while the all-aluminum construction is prepared to fend off errant ski edges. For pesky side-hilling, Dynafit added a 2K EVA Grip Extension, allowing you to make quick hand adjustments on the fly. An essent..
$129.95
Alpine Touring
If your stash of heels outweighs your stash of toes, it's time to grow more toes. And if you're going to go through some growing pains, you might as well make it some nice toes. The Plum binding toe pieces are relatively sturdy contraptions that have the same hole pattern as the Dynafit TLT Classic / Vertical / Comfort series (not to mention the Trab, Hagan, Kreuz..
From $137.95
Known as Snow Crabs, the Kreuzspitze binding toe pieces are some well-built pincers. The RS toes have strong steel springs and don't come with crampon receptors. The GT 2.0 toes have similar action but come with the receptor. Both feature a smooth locking mechanism with multiple notches for new versus broken-in tech fittings. The toe pieces seem to work especially well with La Spor..
From $139.95
